Navodila za uporabo espresso aparata Sage Barista Pro

Uvod

Welcome to the comprehensive instruction manual for your Sage Barista Pro Bean-to-Cup Espresso Machine. This guide provides essential information for setting up, operating, maintaining, and troubleshooting your machine to ensure you consistently achieve barista-quality coffee at home. The Barista Pro features an intuitive LCD interface, a rapid 3-second ThermoJet heating system, an integrated conical burr grinder with dose control, precise PID temperature control, and a powerful steam wand for microfoam milk texturing.

Konec izdelkaview

Slika 1: Spredaj view of the Sage Barista Pro Espresso Machine, showcasing its brushed stainless steel finish, integrated grinder, LCD display, and control buttons.

Slika 2: Included accessories: 54mm portafilter, milk jug, tamper, water filter, cleaning accessories, descaler, dosing funnel, single and dual wall filter baskets, cleaning tablets, and The Razor precision dose trimming tool.

Nastavitev

1. Razpakiranje: Carefully remove all packaging materials and place the machine on a flat, stable surface. Ensure all accessories listed in Figure 2 are present.
2. Namestitev rezervoarja za vodo: Fill the 2-liter water tank with fresh, cold water. Insert the Claro Swiss water filter into the tank as per the filter instructions. Place the tank securely at the back of the machine.
3. Namestitev posode za fižol: Place the bean hopper on top of the machine and twist to lock it into position. Fill with fresh whole coffee beans.
4. Začetni cikel izpiranja: Before first use, perform an initial rinse cycle to prime the machine. Refer to the "First Use" section in the operating instructions for detailed steps.

Navodila za uporabo

1. Mletje in doziranje

Slika 3: The portafilter filled with freshly ground coffee, ready for tamping. The machine features auto grind and dose with 30 grind settings.

• Izberite košarico filtrov: Choose the appropriate single or dual wall filter basket (1-cup or 2-cup) and place it into the portafilter.
• Prilagodi velikost mletja: Use the grind size dial to select your desired grind setting. Finer grinds are typically for espresso, coarser for other methods. The Barista Pro offers 30 grind settings.
• Dose Control: Insert the portafilter into the grinding cradle. The integrated conical burr grinder will automatically dispense the correct amount of coffee. You can adjust the dose if needed via the LCD interface.
• Tamping: Po brušenju uporabite priloženi tampda kavno usedlino trdno in enakomerno potisnete v ročaj za filter.
• Trimming the Dose: Use The Razor precision dose trimming tool to ensure the correct dose level for optimal extraction.

2. Ekstrakcija espressa

Slika 4: The Barista Pro heats up in just 3 seconds using the ThermoJet heating system, ready for immediate use.

Slika 5: Precise 9-bar extraction delivered via the 15-bar Italian pump ensures optimal flavor.

• Vstavite portafilter: Portafilter zaklenite v glavo skupine.
• Predgretje: The ThermoJet heating system reaches optimal extraction temperature in 3 seconds.
• Začni ekstrakcijo: Press the 1-cup or 2-cup button to begin extraction. The machine uses low-pressure pre-infusion, gradually increasing pressure to ensure all flavors are drawn out evenly. Digital PID temperature control maintains water temperature within +/- 2°C for optimal espresso extraction.
• Nadzor pretoka: Observe the espresso flow. It should resemble warm honey. Adjust grind size and dose if the flow is too fast or too slow.

3. Teksturiranje mleka

Slika 6: The powerful steam wand quickly transforms milk into silky smooth microfoam, perfect for latte art.

• Pripravite mleko: Fill the stainless steel milk jug with cold milk.
• Parna palica za čiščenje: Briefly open the steam valve to purge any condensed water from the wand.
• Tekstura mleka: Insert the steam wand into the milk. Open the steam valve fully. Position the wand to create a vortex, incorporating air to create microfoam. Heat the milk to your desired temperature (typically 60-65°C).
• Čista parna palica: Takoj po uporabi obrišite parno palico zamp krpo in jo ponovno očistite, da odstranite morebitne ostanke mleka.

Vzdrževanje

• Dnevno čiščenje:
  • Izpraznite in sperite pladenj za kapljanje.
  • Zunanjost naprave obrišite z mehko krpoamp krpo.
  • Parno cev očistite takoj po vsaki uporabi.
  • Remove and clean the portafilter and filter baskets.
• Group Head Cleaning: Periodically clean the group head using the included cleaning brush and backflush disc with a cleaning tablet. Follow the machine's display prompts for the cleaning cycle.
• Odstranjevanje vodnega kamna: The machine will indicate when descaling is required. Use the provided descaler solution and follow the instructions on the descaler packet and the machine's display. Regular descaling prevents mineral buildup and maintains machine performance.
• Zamenjava vodnega filtra: Replace the Claro Swiss water filter every 2-3 months, or as indicated by the machine, to ensure optimal water quality and reduce the need for descaling.

Odpravljanje težav

Specifikacije

Slika 7: Product dimensions: 40.6cm High x 35.4cm Wide x 34.3cm Deep.

Garancija in podpora

The Sage Barista Pro Espresso Machine comes with a 2-letna garancija na izdelek. For warranty claims, technical support, or service inquiries, please contact Sage Appliances customer service. Keep your proof of purchase for warranty validation.

For further assistance, visit the official Sage Appliances webspletno mesto ali pa se obrnite na kontaktne podatke, ki so navedeni na embalaži izdelka.