1. Uvod
The GameMax Mirage 120mm PC Cooling Fan is designed to provide efficient cooling for computer components while offering customizable RGB lighting. This fan features a dual-ring Rainbow LED design, a hydraulic bearing for quiet operation, and a 7-blade fan structure. It is compatible with 5V addressable 3-pin Aura Sync systems, allowing for synchronized lighting effects with compatible motherboards or controllers.
Slika 1.1: Spredaj view of the GameMax Mirage fan with active Rainbow LED lighting.
2. Varnostne informacije
- Ensure your computer system is powered off and unplugged from the wall outlet before installation or maintenance.
- S komponentami ravnajte previdno, da se izognete poškodbam zaradi statične elektrike. Razmislite o uporabi antistatičnega zapestnega traku.
- Ne silite konektorjev. Pred priklopom kablov se prepričajte o pravilni orientaciji.
- Keep the fan away from liquids and excessive moisture.
- Do not attempt to disassemble the fan unit beyond what is described in this manual.
3. Vsebina paketa
Preverite, ali so v paketu vsi elementi:
- 1 x GameMax Mirage 120mm PC Cooling Fan
- 4 x pritrdilni vijaki
Image 3.1: Retail packaging for the GameMax Mirage fan.
4. Nastavitev in namestitev
Follow these steps to install your GameMax Mirage 120mm PC Cooling Fan:
- Pripravite svoj sistem: Power off your computer and unplug it from the power outlet. Open your computer case to access the fan mounting locations.
- Namestitev ventilatorja: Position the fan in your desired location (e.g., case front, rear, top, or radiator). Ensure the airflow direction is correct for your cooling setup. Use the four included mounting screws to secure the fan to the chassis or radiator. The fan features rubber pads on the corners to help reduce vibration.
- Priključite napajanje ventilatorja: Locate the 3-pin power connector on the fan cable. Connect this cable to an available 3-pin fan header on your motherboard or a fan controller.
- Connect RGB Lighting: Locate the 5V addressable 3-pin Aura connector on the fan cable. Connect this to a compatible 5V ARGB header on your motherboard (often labeled 'VDG' or 'ARGB') or an external RGB controller/hub. Warning: Do not connect this to a 12V RGB header, as it will damage the LEDs.
Image 4.1: The 3-pin power connector (top) and 5V addressable 3-pin Aura connector (bottom).
The fan cables are braided for improved aesthetics and durability, helping to keep your build neat and tidy.
5. Navodila za uporabo
Once installed, the GameMax Mirage fan operates as follows:
- Nadzor hitrosti ventilatorja: The fan speed is controlled via the 3-pin power connector. If connected to a motherboard fan header, the speed can typically be adjusted through your motherboard's BIOS/UEFI settings or dedicated software.
- Nadzor osvetlitve RGB: The Rainbow LED lighting is controlled via the 5V addressable 3-pin Aura connector.
- If connected to a compatible motherboard (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync), you can use the motherboard's software to customize lighting effects, colors, and synchronization with other ARGB components.
- If connected to an external RGB hub/controller, refer to the instructions provided with your specific hub/controller for lighting customization options.
Slika 5.1: Pod kotom view of the GameMax Mirage fan showcasing its dual-ring Rainbow LED lighting.
6. Vzdrževanje
Regular maintenance helps ensure optimal performance and longevity of your cooling fan:
- Čiščenje prahu: Periodically inspect the fan blades and frame for dust accumulation. Use compressed air or a soft brush to gently remove dust. Ensure the fan is powered off and unplugged before cleaning.
- Pregled kabla: Occasionally check the power and RGB cables for any signs of wear or damage.
7. Odpravljanje težav
- Ventilator se ne vrti:
- Ensure the 3-pin power connector is securely plugged into a functional fan header on the motherboard or controller.
- Check motherboard BIOS/UEFI settings to ensure the fan header is enabled and configured correctly.
- LEDs Not Lighting Up or Incorrect Colors:
- Verify the 5V addressable 3-pin Aura connector is securely connected to a compatible 5V ARGB header (not 12V RGB).
- Ensure your motherboard's RGB software or external controller is properly installed and configured.
- If using a splitter or hub, ensure it is powered and functioning correctly.
- Prekomerni hrup:
- Check for any cables or obstructions interfering with the fan blades.
- Ensure the fan is securely mounted and the rubber pads are properly seated to absorb vibrations.
- Dust accumulation can cause imbalance and noise; clean the fan as described in the Maintenance section.
8. Specifikacije
| Funkcija | Specifikacija |
|---|---|
| Model | MIRAGEWHITE FINS |
| Velikost ventilatorja | 120 mm x 120 mm x 25 mm (0.98 x 4.72 x 4.72 palca) |
| Vrsta ležaja | Hidravlični ležaj |
| Ventilatorske lopatice | 7 rezila |
| Vrsta LED | Addressable Rainbow LED (Dual-Ring) |
| Priključek za napajanje ventilatorja | 3-pin |
| RGB priključek | 5V Addressable 3-Pin Aura Connector |
| Delovna zvezatage | 5 Volts (for RGB) / 12 Volts (for fan motor, typical for 3-pin) |
| Ocenjeni Wattage | 3 vatov |
| Največja vrtilna hitrost | 1800 RPM |
| Nivo hrupa | Približno 25 dB(A) |
| Material | Rubber (for vibration dampvečer) |
Slika 8.1: Hrbet view of the GameMax Mirage fan, displaying the product label with model and electrical specifications.
9. Garancija in podpora
Za informacije o garanciji in tehnično podporo se obrnite na uradno spletno stran GAMEMAX webspletno mesto ali se obrnite na prodajalca. Shranite dokazilo o nakupu za uveljavljanje garancije.
