Uvod
Thank you for choosing the Polk Audio PSW10 10-Inch Powered Subwoofer. This manual provides comprehensive instructions to help you set up, operate, and maintain your subwoofer for optimal performance. Please read these instructions carefully before use and retain them for future reference.
Kaj je v škatli
- Polk Audio PSW10 10-Inch Powered Subwoofer
- Napajalni kabel
- Uporabniški priročnik
- Policy Documentation
Ključne značilnosti
- 10-Inch Dynamic Balance Woofer: Equipped with a 10-inch polymer-composite dynamic-balance cone driver for deep, precise bass.
- Built-in High-Current Ampdvigalo: Delivers 50 watts continuous power and 100 watts dynamic power for impactful low-frequency reproduction.
- Non-Resonant Enclosure: All-MDF enclosure construction with 0.75-inch-thick baffles and internal bracing minimizes resonance for clean sound.
- Vsestranska povezljivost: Features line- and speaker-level inputs and speaker-level outputs for easy integration with various audio systems.
- Klippel Measurement Technology: Utilizes laser-based Klippel measurement technology for improved linearity and reduced distortion.
Slika 1: Spredaj view of the Polk Audio PSW10 subwoofer, showcasing the 10-inch dynamic balance woofer and front-firing port for enhanced bass impact.
Nastavitev
1. Umestitev
Optimal subwoofer placement is crucial for sound quality. Experiment with different locations in your room to find the best balance of bass response. Generally, placing the subwoofer in a corner can enhance bass output, while placing it closer to your main speakers can improve integration. Avoid placing it directly against a wall if it causes excessive booming.
2. Povezave
PSW10 ponuja prilagodljive možnosti povezave:
- Vhod na linijski ravni (RCA): Connect your receiver's subwoofer output (LFE or Sub Out) to the LFE input on the subwoofer using an RCA cable. If your receiver has left and right pre-out jacks, use both left and right line-level inputs on the subwoofer.
- Speaker-Level Inputs/Outputs: For receivers without a dedicated subwoofer output, connect the speaker-level outputs from your receiver to the speaker-level inputs on the subwoofer. Then, connect the speaker-level outputs from the subwoofer to your main left and right speakers.
Figure 2: Rear panel connections and controls of the Polk Audio PSW10 subwoofer.
Navodila za uporabo
Once connected, adjust the following controls on the rear panel (refer to Figure 2):
- Nadzor glasnosti: Prilagodi splošno izhodno raven nizkotonca. Začnite z nizko nastavitvijo in jo postopoma povečujte, dokler se nizki toni ne zlijejo z glavnimi zvočniki.
- Nizkopasovni filter: This control sets the upper frequency limit for the subwoofer. Adjust it to match the low-frequency capabilities of your main speakers. A common starting point is 80 Hz.
- Phase Toggle Switch (0°/180°): Adjust this switch to achieve the best bass impact and blend with your main speakers. Listen to music or a movie scene with strong bass and switch between 0° and 180° to determine which setting provides the most coherent and impactful bass.
- 3-Way Power Switch (Auto/On/Off):
- Samodejno: The subwoofer will automatically turn on when it detects an audio signal and enter standby mode after a period of inactivity.
- Na: The subwoofer remains continuously powered on.
- Izklop: The subwoofer is powered off.
Vzdrževanje
To ensure the longevity and optimal performance of your Polk Audio PSW10 subwoofer, follow these maintenance guidelines:
- Čiščenje: Use a soft, dry cloth to wipe down the cabinet. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the finish.
- Umestitev: Nizkotonec hranite stran od neposredne sončne svetlobe, virov toplote in prekomerne vlage. Zagotovite ustrezno prezračevanje okoli njega. ampvžigalno ploščo, da preprečite pregrevanje.
- moč: Če nizkotonca dalj časa ne boste uporabljali, izključite napajalni kabel iz stenske vtičnice.
Odpravljanje težav
| Težava | Možna rešitev |
|---|---|
| Ni zvoka iz nizkotonca | Check power connection and ensure the 3-way power switch is set to 'On' or 'Auto'. Verify audio cable connections from the receiver to the subwoofer. Increase the volume control on the subwoofer. |
| Šibki ali popačeni basi | Adjust the volume control and low-pass filter. Experiment with the phase toggle switch (0°/180°). Check for proper placement and ensure no obstructions are blocking the woofer or port. |
| Nizkotonec brni | Ensure all connections are secure. Try plugging the subwoofer into a different electrical outlet. If using line-level inputs, try a ground loop isolator. |
| Subwoofer does not turn on automatically | Ensure the 3-way power switch is set to 'Auto'. Increase the volume output from your receiver's subwoofer channel to ensure a strong enough signal for auto-on detection. |
Specifikacije
| Funkcija | Podrobnost |
|---|---|
| Ime modela | PSW10 |
| Vrsta zvočnika | Nizkotonec |
| Premer nizkotonca | 10 palcev |
| Amplifier Continuous Power | 50 vatov |
| Amplifier Dynamic Power | 100 vatov |
| Low-Pass Crossover Frequency | 80-160 Hz |
| Vhodna voltage | 120 voltov (AC) |
| Dimenzije izdelka (ŠxVxG) | 14 cm x 14.38 cm x 16.12 cm |
| Teža predmeta | 26 funta |
| Tehnologija povezljivosti | Žično (pomožno) |
| barva | Črna |
Figure 3: Dimensions of the Polk Audio PSW10 Subwoofer.
Garancija in podpora
Your Polk Audio PSW10 Powered Subwoofer comes with a Omejena garancija. For specific details regarding warranty coverage, terms, and conditions, please refer to the included Policy Documentation or visit the official Polk Audio website. For technical support or service inquiries, please contact Polk Audio customer service.
