Uporabniški priročnik za prenosni brezžični Bluetooth zvočnik HyperGear Wave 14704

Uvod

The HyperGear Wave Portable Wireless Bluetooth Speaker (Model 14704) is designed to deliver high-definition stereo sound in various environments. Its IPX4 waterproof rating makes it suitable for use near water, while the built-in microphone allows for hands-free calls. This manual provides essential information for the proper setup, operation, and maintenance of your speaker.

Image: HyperGear Wave speaker, showcasinzaradi svoje vodoodporne zasnove z zaščito pred vodnimi brizgami.

Vsebina paketa

Preverite, ali so v paketu prisotni vsi elementi:

• HyperGear Wave Speaker
• 3.5mm Stereo Auxiliary Cable
• Micro USB polnilni kabel
• Uporabniški priročnik (ta dokument)

Image: The HyperGear Wave speaker alongside its included 3.5mm auxiliary cable and Micro USB charging cable.

Nastavitev

1. Polnjenje zvočnika

Before initial use, fully charge the speaker. Connect the Micro USB Charging Cable to the speaker's charging port and the other end to a USB power source (e.g., wall adapter, computer USB port). The charging indicator light will illuminate during charging and turn off or change color when fully charged.

2. Vklop/izklop

Press and hold the Power button (usually marked with a power icon) for approximately 3 seconds to turn the speaker on or off. A sound prompt or LED indicator will confirm the status change.

Navodila za uporabo

1. Bluetooth seznanjanje

1. Ensure the speaker is powered on and within 33 feet (10 meters) of your Bluetooth-enabled device.
2. The speaker will automatically enter pairing mode, indicated by a flashing LED light (refer to your speaker's specific LED behavior).
3. On your device, navigate to the Bluetooth settings and search for available devices.
4. Select "HyperGear Wave" (or similar name) from the list.
5. Ko je zvočnik seznanjen, bo oddal potrditveni zvok in LED lučka bo začela neprekinjeno svetiti.

Zvočnik se bo ob vklopu samodejno poskušal ponovno povezati z zadnjo seznanjeno napravo.

Image: The HyperGear Wave speaker positioned on sand, demonstrating its wireless capability for outdoor use.

2. Osnovne kontrole

• Predvajanje/pavza: Enkrat pritisnite gumb Predvajaj/Premor.
• Povečaj glasnost: Pritisnite gumb '+'.
• Znižaj glasnost: Pritisnite gumb '-'.
• Naslednja skladba: Pritisnite in držite gumb »+«.
• Prejšnja skladba: Pritisnite in držite gumb '-'.
• Sprejmi/končaj klic: Med dohodnim klicem enkrat pritisnite gumb Predvajaj/Pavza.
• Zavrni klic: Med dohodnim klicem pritisnite in držite gumb Predvajaj/Pavza.

3. Audio Input Modes

The HyperGear Wave speaker supports multiple audio input options:

• Način Bluetooth: Default wireless connection.
• Pomožni način (AUX): Connect an audio device using the included 3.5mm Stereo Auxiliary Cable. The speaker will automatically switch to AUX mode when the cable is inserted.
• Način kartice Micro SD: Vstavite kartico Micro SD (ni priložena) z zvokom filev predvideno režo. Zvočnik bo samodejno zaznal in predvajal glasbo z nje.

Slika: Bližnji posnetek view of the speaker highlighting its compatibility with Bluetooth, Auxiliary input, and Micro SD cards.

Vzdrževanje

• Čiščenje: Uporabite mehko, damp cloth to clean the speaker's exterior. Avoid harsh chemicals or abrasive cleaners.
• Izpostavljenost vodi: While IPX4 waterproof, avoid submerging the speaker. Ensure all port covers are securely closed before exposure to water.
• Shranjevanje: Zvočnik shranjujte na hladnem in suhem mestu, stran od ekstremnih temperatur in neposredne sončne svetlobe.
• Vzdrževanje baterije: Da podaljšate življenjsko dobo baterije, se izogibajte pogostemu popolnemu praznjenju zvočnika. Redno ga polnite, tudi če ga dalj časa ne uporabljate.

Image: The HyperGear Wave speaker attached to a kayak, illustrating its suitability for splash-prone environments.

Odpravljanje težav

• Zvočnik se ne vklopi: Prepričajte se, da je baterija napolnjena. Priključite polnilni kabel in poskusite znova.
• Seznanitev z napravo Bluetooth ni mogoča:
  • Prepričajte se, da je zvočnik v načinu seznanjanja (utripajoča LED lučka).
  • Prepričajte se, da je Bluetooth v vaši napravi omogočen.
  • Zvočnik premaknite bližje napravi (do 33 metrov).
  • Izklopite in vklopite zvočnik in Bluetooth na napravi.
  • Forget the speaker from your device's Bluetooth list and attempt to re-pair.
• Ni zvoka ali nizka glasnost:
  • Prilagodite glasnost zvočnika in povezane naprave.
  • Ensure the speaker is properly paired or the AUX cable/Micro SD card is correctly inserted.
  • Preverite, ali se zvočni vir predvaja.
• Slaba kakovost zvoka:
  • Zvočnik premaknite bližje napravi Bluetooth, da se izognete motnjam.
  • Prepričajte se, da med zvočnikom in napravo ni ovir.
  • If using AUX, check the cable for damage and ensure it's fully inserted.

Specifikacije

Garancija in podpora

Informacije o garanciji

This HyperGear product comes with a Limited Warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included in your product packaging or visit the official HyperGear webmesto.

Podpora uporabnikom

If you encounter any issues or have questions not covered in this manual, please contact HyperGear customer support. Contact information can typically be found on the product packaging or the official HyperGear webspletno mesto: www.hypergear.com.