SEBSON GS536GC Photoelectric Smoke Detector User Manual

Uvod

The SEBSON GS536GC photoelectric smoke detector is designed to provide early warning of dangerous smoke development. This device is certified according to DIN EN 14604 standards, ensuring reliable performance. Upon detecting smoke, the alarm emits a loud sound to alert occupants. The detector also features a self-test function and a low battery warning system for continuous safety monitoring.

Vsebina paketa

Preverite, ali so v vašem paketu prisotni vsi spodaj navedeni elementi:

• 6 x SEBSON GS536GC Smoke Detectors
• 6 x 9V DC Block Batteries (Alkaline)
• 12 x pritrdilni vijaki

Varnostne informacije

Please read and understand all safety instructions before installation and use. Failure to do so may result in improper operation and potential hazards.

• Ne barvajte: Never paint the smoke detector. Paint can clog the sensing chambers and prevent the unit from operating correctly.
• Redno testiranje: Test the smoke detector weekly to ensure it is functioning properly.
• Zamenjava baterije: Replace the battery immediately when the low battery warning sounds. Although the included battery has a 5-year life, individual battery performance may vary.
• Umestitev: Namestite detektorje dima v vse spalne prostore in na vsako nadstropje vašega doma, vključno s kletjo.
• Vzdrževanje: Keep the detector clean and free from dust.
• Odstranjevanje: Dispose of used batteries and the smoke detector according to local regulations.

Nastavitev in namestitev

Proper installation is crucial for the effective operation of your smoke detector.

1. Izbira mesta namestitve

Install smoke detectors on the ceiling in the center of the room, or at least 50 cm (20 inches) from any wall. Avoid installing in:

• Kitchens, bathrooms, or garages where cooking fumes, steam, or exhaust can cause false alarms.
• Near ventilation openings, air conditioners, or fans, as air currents can prevent smoke from reaching the detector.
• Areas with high humidity or extreme temperatures (outside 0°C to +37°C).

Image: A SEBSON GS536GC smoke detector mounted on a white ceiling, demonstrating a typical installation location.

2. Namestitev baterije

1. Remove the mounting bracket from the smoke detector by twisting it counter-clockwise.
2. Insert the provided 9V DC block battery into the battery compartment, ensuring correct polarity (+/-).
3. The detector will emit a short beep to indicate successful battery installation.

3. Montaža detektorja

You can mount the detector using the included screws or an appropriate adhesive (not included).

1. Vijačna montaža:
   • Mark two drill holes on the ceiling using the mounting bracket as a template.
   • Izvrtajte luknje in po potrebi vstavite zidne vložke.
   • Attach the mounting bracket to the ceiling using the provided screws.
   • Align the smoke detector with the mounting bracket and twist clockwise until it locks securely in place.
2. Adhesive Mounting (Optional, not recommended for all surfaces):
   • Ensure the ceiling surface is clean, dry, and smooth.
   • Apply a suitable adhesive (e.g., double-sided adhesive pad, not included) to the back of the mounting bracket.
   • Press the bracket firmly onto the desired ceiling location for at least 30 seconds.
   • Align the smoke detector with the mounting bracket and twist clockwise until it locks securely in place.

Image: Technical drawing illustrating the dimensions of the smoke detector (90mm diameter, 31mm height).

Image: Another technical drawing providing an isometric view of the smoke detector with its dimensions.

Navodila za uporabo

Normalno delovanje

Once installed with a fresh battery, the smoke detector will enter normal operating mode. A short flash of the LED indicator every 32 seconds confirms that the unit is powered on and performing its self-test function.

Slika: spredaj view of the smoke detector, highlighting the test button and LED indicator area.

Testiranje detektorja

To manually test the smoke detector, press and hold the central test button for approximately 5 seconds. The alarm will sound loudly, and the LED will flash rapidly. Release the button to stop the alarm. This test verifies the battery, alarm, and sensing circuitry are working correctly.

Alarmni signal

When smoke is detected, the alarm will emit a loud, continuous sound (≥ 85 dB at 3 meters) and the LED will flash rapidly. In case of an alarm, evacuate the premises immediately and contact emergency services.

Opozorilo o nizki bateriji

When the battery is low, the detector will emit a short chirp approximately every 30-40 seconds, accompanied by a brief LED flash. This indicates that the battery needs to be replaced immediately.

Vzdrževanje

Regular maintenance ensures the continued reliability of your smoke detector.

• Tedensko testiranje: Press the test button weekly to confirm the alarm is functioning.
• Mesečno čiščenje: Gently vacuum the exterior of the smoke detector with a soft brush attachment to remove dust and cobwebs. Do not use cleaning agents or solvents.
• Zamenjava baterije: Replace the 9V alkaline battery when the low battery warning sounds. Although the battery has a 5-year life, it is replaceable. Always use a fresh, high-quality 9V alkaline battery.

Slika: Stran view of the smoke detector, illustrating the air intake vents that should be kept clear of dust.

Odpravljanje težav

Specifikacije

Garancija in podpora

Za informacije o garanciji ali tehnično podporo se obrnite na uradno spletno stran proizvajalca webspletno mesto ali se obrnite neposredno na njihovo službo za stranke. Shranite račun kot dokazilo o nakupu.

Proizvajalec: SEBSON