1. Uvod
This manual provides essential information for the safe and efficient operation of your Behringer NX6000D Power Amplifier. Please read it thoroughly before use and retain it for future reference. The NX6000D is a high-performance, ultra-lightweight 6000-Watt Class-D power amplifier with integrated DSP and 24-bit/96 kHz converters, designed for professional audio applications.
2. Pomembna varnostna navodila
- vir energije: Connect the unit only to an AC power outlet of the correct voltage as specified on the rear panel.
- Prezračevanje: Zagotovite zadostno prezračevanje. Ne blokirajte prezračevalnih odprtin.
- Voda in vlaga: Do not expose this appliance to rain or moisture. Do not place objects filled with liquids on the apparatus.
- Servisiranje: Vsa servisna dela prepustite usposobljenemu serviserju. Izdelka ne poskušajte servisirati sami.
- Kabli: Use only high-quality, shielded cables for all audio connections to prevent interference.
- Ozemljitev: Ta izdelek mora biti ozemljen.
- Čiščenje: Čistite samo s suho krpo.
3. Navodila za namestitev
3.1 Razpakiranje in pregled
Previdno razpakirajte amplifier and inspect it for any signs of damage during transit. If damage is found, contact your dealer immediately.
3.2 Namestitev
The NX6000D is designed for rack mounting. Ensure sufficient space around the unit for proper airflow. Avoid placing it near heat sources or in direct sunlight.
3.3 Povezave
- Napajalni priključek: Priloženi napajalni kabel priključite na amplifier's power inlet and then to a suitable grounded power outlet.
- Vhodne povezave: Use balanced XLR or 1/4" TRS cables to connect your audio source (mixer, preamplifier) to the INPUT A and INPUT B jacks on the rear panel.
- Izhodne povezave: Connect your loudspeakers to the SPEAKON output connectors (OUTPUT A and OUTPUT B) on the rear panel. Ensure correct polarity and impedance matching. The amplifier supports 4-ohm and 8-ohm loads.
Figure 1: Front panel of the Behringer NX6000D Power Amplifier, showing controls and display.
Slika 2: Pod kotom view of the Behringer NX6000D Power Amplifier, highlighting its compact design.
4. Navodila za uporabo
4.1 Vklop/izklop
Press the POWER button on the front panel to turn the unit on. The display will illuminate. To power off, press the POWER button again.
4.2 Kontrole sprednje plošče
- Level Controls (CH A, CH B): Adjust the output level for each channel.
- SIGNAL/LIMIT/PROTECT LEDs: Indicate signal presence, limiting activity, and protection mode.
- LCD zaslon: Shows current settings, DSP parameters, and status.
- Gumb NASTAVITEV: Accesses the main setup menu.
- Gumb ZA OBDELAVO: Accesses DSP processing parameters.
- Gumb kodirnika: Navigates menus and adjusts parameter values.
- Gumb EXIT: Returns to the previous menu or main screen.
4.3 DSP Functionality
The integrated DSP allows for advanced audio processing. Press the PROCESS button to enter the DSP menu. Here you can configure:
- Zakasnitev: Adjust signal delay for speaker alignment.
- križanec: Set crossover frequencies and filter types (e.g., Butterworth, Linkwitz-Riley, Bessel) up to 48 dB/octave.
- EQ: Utilize 8 parametric and 2 dynamic equalizer bands for precise frequency shaping.
- Dynamics Processing: Apply compression or limiting to control dynamic range.
- Varnostne nastavitve: Lock settings to prevent unauthorized changes.
Use the Encoder Knob to navigate and adjust parameters. Press the Encoder Knob to confirm selections. Refer to the full digital manual (available on the Behringer website) for detailed DSP operation.
5. Vzdrževanje
- Čiščenje: Disconnect the power cord before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Prezračevanje: Redno preverjajte, ali so prezračevalne odprtine čiste od prahu in umazanije.
- Kabelske povezave: Občasno preverite vse kabelske povezave glede trdne prileganja in znakov obrabe.
- Shranjevanje: If storing the unit for an extended period, ensure it is in a dry, dust-free environment.
6. Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Brez moči | Power cord disconnected; faulty outlet; internal fuse. | Check power cord connection; try a different outlet; contact service if fuse is suspected. |
| Ni zvoka | Input/output cables incorrect; level controls too low; protection mode active. | Verify all cable connections; increase level controls; check PROTECT LED (if lit, power cycle unit). |
| Popačen zvok | Input signal too high; speaker impedance mismatch; faulty speaker. | Reduce input signal level; verify speaker impedance matches amplifier; test with different speakers. |
| Enota se pregreje | Blocked ventilation; excessive load. | Ensure clear airflow around the unit; reduce output level or load. |
7. Tehnične specifikacije
- Izhodna moč: 2 x 3000 Watts into 4 Ohms, 2 x 1600 Watts into 8 Ohms
- Teža: Less than 13.2 lbs / 6.0 kg
- Dimenzije (V x Š x G): Približno 3.7 x 19.02 x 12.44 palca (94 x 483 x 316 mm)
- DSP: High-performance DSP with 24-bit/96 kHz converters
- Lastnosti DSP: Delay, Crossover (3 filter types, up to 48 dB/octave), EQ (8 parametric, 2 dynamic), Dynamics Processing
- Vhodni priključki: 2 x XLR/TRS combo jacks
- Izhodni priključki: 2 x SpeakON connectors
- Napajanje: Ultra-efficient switch-mode power supply
- Hlajenje: Revolutionary cool-running high-density Class-D technology
- Material: Kovina
- barva: Črna
8. Garancija in podpora
For detailed warranty information, please refer to the Behringer warranty program available on their official website. Behringer products are typically covered by a limited warranty against defects in materials and workmanship.
8.1 Tehnična podpora
If you encounter issues not covered in the troubleshooting section or require further assistance, please visit the official Behringer support website or contact their customer service. You may need your product's serial number for support inquiries.
Behringerjev uradni Webspletno mesto: www.behringer.com
