lightmaXX Vega 3-Way PRO Beam/WASH/FX Moving Head Scanner Instruction Manual

1. Uvod

Thank you for choosing the lightmaXX Vega 3-Way PRO Beam/WASH/FX Moving Head Scanner. This versatile lighting fixture is designed for professional stage, event, and club applications, offering dynamic beam, wash, and special effect capabilities. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

2. Varnostna navodila

Please read and understand all safety instructions before installing or operating this device. Failure to comply with these instructions may result in electric shock, fire, or personal injury.

• Ta naprava je samo za profesionalno uporabo.
• Prepričajte se, da je napajalnik voltage se ujema z voltage naveden na enoti.
• Napravo vedno priključite na ozemljeno električno vtičnico.
• Disconnect from mains power before any service, cleaning, or maintenance.
• Naprave ne uporabljajte, če je napajalni kabel poškodovan.
• Izogibajte se neposredni izpostavljenosti oči viru svetlobe.
• Ensure adequate ventilation around the unit to prevent overheating. Maintain a minimum distance of 0.5 meters from flammable materials.
• Mount the device securely using appropriate clampin varnostne kable.
• Ne odpirajte ohišja; v notranjosti ni delov, ki bi jih lahko uporabnik sam servisiral. Vsa servisna dela prepustite usposobljenemu osebju.
• Keep the device away from rain, moisture, and extreme temperatures.

3. Izdelek je končanview

The lightmaXX Vega 3-Way PRO is a hybrid moving head fixture designed to deliver powerful and versatile lighting effects. It combines beam, wash, and special effect functionalities in one compact unit.

Slika 3.1: Spredaj view of the lightmaXX Vega 3-Way PRO, displaying red light output.

Slika 3.2: Spredaj view of the lightmaXX Vega 3-Way PRO with lights off, showing the lens array.

3.1 Nadzorna plošča in priključki

The rear of the unit features the control panel and various input/output connections for power and DMX control.

Figure 3.3: Close-up of the control panel and connection ports.

Slika 3.4: Zadaj view of the lightmaXX Vega 3-Way PRO, showing DMX In/Out, Power In/Out, and fuse.

• DMX IN/OUT: 3-pin XLR connectors for DMX signal input and output.
• VHOD/IZHOD NAPAJANJA: PowerCon compatible connectors for mains power input and daisy-chaining power to other units.
• VAROVALEC: Fuse holder for circuit protection.
• Stikalo za vklop/izklop: Glavno stikalo za napajanje enote.
• Zaslon: LCD screen for menu navigation and settings.
• Gumbi za upravljanje: UP, DOWN, ESC, ENTER for navigating the menu and adjusting settings.
• DMX/Run Indicators: LEDs indicating DMX signal presence and auto-run mode.

4. Nastavitev

4.1 Montaža

The lightmaXX Vega 3-Way PRO can be mounted in various orientations (floor, truss, wall) using appropriate mounting hardware (not included). Always ensure the mounting surface or truss is capable of supporting the weight of the fixture and any additional equipment.

• Use a safety cable (not included) attached to the designated safety point on the fixture to prevent accidental drops.
• Ensure the fixture is securely fastened and balanced.
• Allow sufficient space around the fixture for ventilation and movement.

4.2 Napajalni priključek

Connect the provided power cable to the POWER IN connector on the fixture and then to a suitable grounded power outlet. The unit supports daisy-chaining power to other fixtures using the POWER OUT connector, but ensure the total current draw does not exceed the circuit breaker's rating.

4.3 Povezava DMX

To control the fixture via DMX, connect a DMX controller to the DMX IN port using a 3-pin XLR cable. If connecting multiple DMX fixtures, daisy-chain them by connecting the DMX OUT of the first fixture to the DMX IN of the next. The last fixture in the chain should have a DMX terminator connected to its DMX OUT port to prevent signal reflection.

5. Delovanje

5.1 Krmarjenje po nadzorni plošči

Use the control buttons to navigate the menu and adjust settings:

• GOR, DOL: Scroll through menu options or increase/decrease values.
• VNESI: Izberite možnost ali potrdite nastavitev.
• ESC: Go back to the previous menu or cancel an action.

5.2 Nastavitev naslova DMX

To control the fixture with a DMX controller, you must set a unique DMX start address for each unit. Refer to the DMX channel chart in your DMX controller's manual for channel assignments.

1. Pritisnite ENTER za dostop do glavnega menija.
2. Navigate to the 'DMX Address' or 'Address Set' option using GOR/DOL.
3. Pritisnite ENTER izbrati.
4. Uporaba GOR/DOL to set the desired DMX start address.
5. Pritisnite ENTER to confirm and save the address.

5.3 Načini delovanja

The lightmaXX Vega 3-Way PRO typically offers several operating modes:

• DMX način: Full control over all functions via a DMX controller.
• Samodejni način delovanja: Pre-programmed internal light shows that run automatically. Select 'Auto Run' from the menu and choose a program.
• Zvočno aktivni način: The fixture reacts to sound via its built-in microphone. Select 'Sound Active' from the menu.
• Glavni/podrejeni način: Link multiple units together. Set one unit as 'Master' and others as 'Slave'. The slave units will mirror the master's actions.

6. Vzdrževanje

Regular maintenance ensures the longevity and optimal performance of your lightmaXX Vega 3-Way PRO.

• Čiščenje: Periodically clean the lenses and exterior housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents. Ensure the unit is powered off and cool before cleaning.
• Prezračevanje: Keep ventilation openings clear of dust and debris. Use compressed air to gently clear vents if necessary.
• Zamenjava varovalke: If the unit does not power on, check the fuse. Disconnect power, unscrew the fuse holder, and replace with a fuse of the exact same type and rating (refer to specifications).
• Pregled: Regularly inspect power cables, DMX cables, and mounting hardware for any signs of wear or damage. Replace damaged components immediately.

7. Odpravljanje težav

If you encounter issues with your lightmaXX Vega 3-Way PRO, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact lightmaXX customer support or your authorized dealer.

8. Specifikacije

9. Garancija in podpora

For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your authorized lightmaXX dealer. If you require technical assistance or have questions not covered in this manual, please contact lightmaXX customer support or your retailer for further guidance.