Sauter Marapi Electric Towel Dryer Radiator User Manual

1. Uvod

Thank you for choosing the Sauter Marapi Electric Towel Dryer Radiator. This manual provides essential information for the safe installation, operation, and maintenance of your appliance. Please read these instructions carefully before use and retain them for future reference.

The Sauter Marapi is designed to provide comfortable heating and efficient towel drying, featuring a powerful blower, an intuitive LCD screen, and programmable settings for optimal energy management.

2. Varnostna navodila

Pomembno: Neupoštevanje teh varnostnih navodil lahko povzroči električni udar, požar ali telesne poškodbe.

• This appliance is intended for domestic use only as a towel dryer and supplementary heater.
• Installation must be carried out by a qualified electrician in accordance with local wiring regulations and building codes, especially in bathrooms.
• Do not install the appliance directly below a socket outlet.
• Prepričajte se, da je napajalnik voltage se ujema z nalepko z nazivnimi vrednostmi na napravi.
• Do not cover the radiator or blower vents, as this can cause overheating and fire.
• Med delovanjem naprave naj se otroci in hišni ljubljenčki ne približujejo, saj se površine lahko segrejejo.
• Naprave ne potapljajte v vodo ali druge tekočine.
• Če je napajalni kabel poškodovan, ga mora zamenjati proizvajalec, njegov serviser ali podobno usposobljena oseba, da se izognete nevarnosti.
• Ta naprava ni namenjena uporabi s strani oseb (vključno z otroki) z zmanjšanimi fizičnimi, senzoričnimi ali duševnimi sposobnostmi ali s pomanjkanjem izkušenj in znanja, razen če jih oseba, ki je odgovorna za njihovo varnost, nadzoruje ali jim daje navodila glede uporabe naprave.

3. Izdelek je končanview

The Sauter Marapi combines a stylish design with practical functionality. Familiarize yourself with the main components:

• Grelni elementi: Horizontal round tubes for towel drying and radiant heat.
• Ventilator: Located at the bottom, provides rapid heat for quick room warming.
• Nadzorna plošča LCD: Displays temperature, mode, and programming settings.
• Gumbi za upravljanje: For adjusting settings and navigating menus.

Figure 3.1: Sauter Marapi Electric Towel Dryer Radiator in a bathroom setting. This image shows the radiator mounted on a wall next to a sink and mirror, highlighting its integration into a modern bathroom environment. The radiator features multiple horizontal bars for hanging towels and a control panel on the upper right side.

Slika 3.2: Spredaj view of the Sauter Marapi Electric Towel Dryer Radiator. This image provides a clear, head-on view of the appliance, showcasing its white finish, numerous round horizontal heating tubes, and the integrated LCD control panel on the right side. Three circular elements are visible at the top.

Slika 3.3: Pod kotom view of the Sauter Marapi Electric Towel Dryer Radiator. This perspective highlights the depth of the radiator and the design of its round heating tubes, which are suitable for hanging and drying towels. The LCD control panel is also visible on the side.

4. Nastavitev in namestitev

The Sauter Marapi radiator must be securely mounted to a wall and connected to the electrical supply. Due to the electrical nature and bathroom environment, professional installation is strongly recommended.

4.1 Montaža

• Choose a suitable wall location, ensuring adequate clearance from water sources (sinks, showers, bathtubs) as per local regulations (e.g., volume zones in bathrooms).
• Use the provided mounting bracket and hardware. Mark the drilling points accurately.
• Drill holes and insert appropriate wall plugs. Secure the mounting bracket firmly to the wall.
• Carefully lift the radiator and attach it to the mounting bracket. Ensure it is level and stable.

4.2 Električna povezava

• Opozorilo: Disconnect power at the main circuit breaker before attempting any electrical work.
• The appliance must be connected to a permanent electrical installation by a qualified electrician.
• Poskrbite za pravilno ozemljitev.
• The electrical connection should be protected by a residual current device (RCD) if required by local regulations.

5. Navodila za uporabo

After proper installation and power connection, you can begin operating your Sauter Marapi radiator.

5.1 Vklop/izklop

• Pritisnite Moč button on the control panel to turn the appliance on or off.
• The LCD screen will illuminate when the unit is powered on.

5.2 LCD-zaslon in krmilniki

The LCD screen displays current temperature, operating mode, and programming status. Use the navigation buttons (e.g., Način, +/-, Prog) to adjust settings.

5.3 Načini delovanja

Your radiator typically offers several operating modes:

• Udobni način: Maintains a set temperature for continuous comfort.
• Eko način: Ohranja nižjo, energetsko varčno temperaturo.
• Način zaščite pred zmrzaljo: Preprečuje, da bi temperatura v prostoru padla pod kritično raven (npr. 7 °C).
• Programski način: Follows a pre-set heating schedule.
• Blower Boost Mode: Activates the integrated blower for rapid heating for a set duration (e.g., 15-30 minutes).

Pritisnite Način button to cycle through available modes. Use the +/- buttons to adjust the target temperature in Comfort or Eco modes.

5.4 Programiranje

The programmable feature allows you to set specific heating schedules for different times of the day and days of the week.

1. Pritisnite Prog gumb za vstop v način programiranja.
2. Uporabite Način or arrow buttons to select the day and time segment you wish to program.
3. Uporabite +/- buttons to set the desired mode (Comfort, Eco, Off) for that segment.
4. Repeat for all desired time segments and days.
5. Pritisnite Prog again to exit and save the settings.

Refer to the detailed programming section in your full manual for advanced options and specific button functions.

6. Vzdrževanje

Regular cleaning ensures optimal performance and extends the lifespan of your radiator.

• Čiščenje: Before cleaning, ensure the appliance is switched off and disconnected from the power supply. Allow it to cool completely. Wipe the surfaces with a soft, damp krpo. Ne uporabljajte abrazivnih čistil, topil ali agresivnih kemikalij, saj lahko poškodujejo površino.
• Blower Filter (if applicable): Some models may have a removable filter for the blower. Check your specific model's instructions for cleaning or replacing this filter.
• Splošni pregled: Periodically check the power cord and plug for any signs of damage. If damage is found, contact a qualified technician for repair.

7. Odpravljanje težav

If you encounter issues with your Sauter Marapi radiator, consult the following table before contacting customer support.

8. Specifikacije

• Znamka: Sauter
• Model: Marapi
• Številka modela: 3410532201757
• Tip: Electric Towel Dryer Radiator with Blower
• Izhodna moč: 1750 vatov
• Nadzor: LCD Screen, Programmable
• Teža: Približno 27.25 kg
• ASIN: B07HGPKKJD

9. Garancija in podpora

For warranty information, please refer to the warranty card included with your product or visit the official Sauter webspletnega mesta. Shranite dokazilo o nakupu za uveljavljanje garancije.

If you require technical assistance, spare parts, or have questions not covered in this manual, please contact Sauter customer support. Contact details can typically be found on the manufacturer's webspletnem mestu ali na embalaži vašega izdelka.

Sauter Official Webspletno mesto: www.sauter.fr (Prosimo, preverite pravilno regionalno webspletno mesto za podporo.)