1. Uvod
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the ABB MPS3-230/24 Coated Power Supply. This unit is a reliable switch-mode power supply designed for industrial control cabinets, offering a stable 24 VDC output from a 95 to 265 VAC input.
2. Varnostne informacije
Pred namestitvijo in uporabo natančno preberite vsa varnostna navodila. Neupoštevanje teh navodil lahko povzroči električni udar, požar ali hude poškodbe.
- Namestitev in vzdrževanje mora izvajati samo usposobljeno osebje.
- Ensure the power supply is disconnected from the main voltage before any installation, wiring, or maintenance work.
- Do not open the device enclosure. There are no user-serviceable parts inside.
- Napravo zaščitite pred vlago, prahom in ekstremnimi temperaturami.
- Poskrbite za ustrezno prezračevanje okoli enote, da preprečite pregrevanje.
3. Izdelek je končanview
The ABB MPS3-230/24 is a compact and efficient DIN rail mountable power supply. It features short-circuit and overload protection, ensuring reliable operation in demanding environments.
This image displays the ABB MPS3-230/24 Coated Power Supply from an angled perspective. The top surface shows product information and safety warnings. The front face features input terminals labeled 'INPUT 100-240V~ N L 1 2 3' and output terminals labeled 'OUTPUT 24V=/3A + - 4 5', along with an 'OK' indicator. The device is designed for DIN rail mounting, visible by the mounting mechanism at the bottom. Ventilation grilles are present on the sides.
Ključne značilnosti:
- DIN rail mountable for easy integration into control cabinets.
- Širok vhodni voltage range: 95 to 265 VAC.
- Stable 24 VDC output with a 3 Amp trenutna ocena.
- Integrated short-circuit and overload protection.
- LED indication for operational status.
- Coated for enhanced durability in industrial settings.
4. Nastavitev in namestitev
4.1. Montaža na DIN letev
- Ensure the DIN rail is securely mounted within the control cabinet.
- Position the power supply unit onto the DIN rail, ensuring the mounting clip engages correctly.
- Press the unit firmly until it clicks into place, indicating a secure attachment.
4.2. Povezave ožičenja
Before making any connections, ensure the main power supply is switched off.
- Input Connections (AC): Connect the AC input wires to the terminals labeled 'INPUT 100-240V~ N L 1 2 3'. Ensure correct polarity for Line (L) and Neutral (N). Terminal '3' is typically for protective earth (PE) if applicable.
- Output Connections (DC): Connect the DC load wires to the terminals labeled 'OUTPUT 24V=/3A + - 4 5'. Connect the positive (+) wire to terminal '4' and the negative (-) wire to terminal '5'.
- Use appropriate wire gauges for the current rating (3 Amps) za preprečevanje pregrevanja.
- Verify all connections are tight and secure to prevent loose contacts.
5. Delovanje
Once installed and wired correctly, the power supply is ready for operation.
- Vklop: Switch on the main AC power supply to the unit.
- LED indikator: The 'OK' LED on the unit will illuminate when the output voltage is within the specified range, indicating normal operation.
- The unit provides a stable 24 VDC output for connected devices.
6. Vzdrževanje
The ABB MPS3-230/24 power supply is designed for minimal maintenance. However, periodic checks can ensure optimal performance and longevity.
- Čiščenje: Periodically clean the unit's exterior and ventilation grilles with a soft, dry cloth to prevent dust accumulation. Ensure power is off before cleaning.
- Preverjanje povezave: Annually inspect all wiring connections for tightness and signs of wear or corrosion.
- Okoljski pogoji: Zagotovite, da delovno okolje ostane znotraj določenih temperaturnih in vlažnostnih območij.
7. Odpravljanje težav
If the power supply is not functioning as expected, refer to the following common issues and solutions:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Brez izhodne voltage / 'OK' LED off | Brez vhodne glasnostitage; Incorrect wiring; Overload/Short-circuit | Check input power supply; Verify wiring connections; Disconnect load and check for short-circuit. |
| Izhodna voltage nestabilno | Vhodna voltage fluctuations; Overload condition | Zagotovite stabilno vhodno glasnosttage; Reduce load or use a higher-rated power supply. |
| Enota se zdi pretirano vroča | Insufficient ventilation; Ambient temperature too high; Overload | Ensure adequate airflow; Check ambient temperature; Reduce load. |
Če težava po poskusu teh rešitev ne izgine, se obrnite na usposobljeno servisno osebje.
8. Tehnične specifikacije
| Specifikacija | Vrednost |
|---|---|
| Ime modela | MPS3-230/24 |
| Vhodna voltage Območje | 95 do 265 VAC |
| Izhodna voltage | 24 VDC |
| Ocena izhodnega toka | 3 Amps |
| Izhodna vattage | 72 vatov |
| Faktor oblike | DIN montaža na tirnico |
| Dimenzije (VxŠxG) | 132 x 75 x 71 mm |
| Območje delovne temperature | 0 to +60 Degrees C |
| Metoda hlajenja | zrak |
| Zaščita | Short-circuit and overload protected |
| Indikacija | LED (OK) |
| Proizvajalec | sl |
9. Garancija in podpora
9.1. Garancija
ABB products are manufactured to high standards and are typically covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation or contact your supplier for specific warranty terms and conditions applicable to the MPS3-230/24.
9.2. Tehnična podpora
For technical assistance, product inquiries, or service requests, please contact your local ABB representative or authorized distributor. Ensure you have the product model number (MPS3-230/24) and any relevant purchase details available when seeking support.
