1. Uvod
This manual provides essential instructions for the safe and effective operation, maintenance, and care of your Einhell GE-LC 36/35 Li Solo Battery Chainsaw. Please read this manual thoroughly before using the chainsaw for the first time and keep it for future reference. This product is designed for cutting wood and similar materials.
Image 1.1: The Einhell GE-LC 36/35 Li Solo Battery Chainsaw, showing the main unit and an outline of where the batteries are inserted.
2. Varnostna navodila
Pri uporabi električnega orodja vedno dajte prednost varnosti. Neupoštevanje teh navodil lahko povzroči resne poškodbe ali materialno škodo.
2.1 Splošna varnost
- Nosite osebno zaščitno opremo (OZO): Always wear safety glasses, hearing protection, gloves, sturdy footwear, and appropriate clothing. A safety helmet with a face shield is recommended.
- Delovno območje: Zagotovite, da na delovnem območju ni mimoidočih, otrok in hišnih ljubljenčkov. Območje naj bo dobro osvetljeno in brez ovir.
- Vremenske razmere: Do not use the chainsaw in rain or damp conditions. Avoid operating in strong winds.
- Varnost baterije: Use only recommended Einhell Power X-Change batteries. Do not expose batteries to heat or fire.
2.2 Varnost, specifična za motorno žago
- Preprečevanje povratnega udarca: Be aware of the kickback danger zone. Avoid cutting with the tip of the guide bar. Maintain a firm grip with both hands.
- Verižna zavora: Ensure the chain brake is functional before each use. It is designed to stop the chain quickly in case of kickback.
- Pravilen oprijem: Motorno žago vedno trdno držite z obema rokama, s palcema in prsti, ki obdajajo ročaje.
- Cutting Position: Maintain a balanced stance. Do not overreach. Cut at waist height or below if possible.
Image 2.1: The chain brake lever, which activates the kickback protection system, shown in the engaged (stop) position.
3. Izdelek je končanview
The Einhell GE-LC 36/35 Li Solo is a powerful cordless chainsaw featuring a brushless motor for extended operation and efficiency. It is part of the Einhell Power X-Change family, requiring two 18V batteries for 36V power.
3.1 Ključne lastnosti
- Brushless Motor: For enhanced power and longer run time.
- Kickback Protection System: Automatically shuts off the saw upon chain lock.
- Oregon Branded Quality Chain and Bar: 14-inch guide bar for reliable cutting performance.
- Tool-free Chain Tension Adjustment: For quick and easy adjustments.
- Automatic Chain Lubrication: Ensures consistent chain oiling during operation.
- Metal Grip Claws: For secure handling and stability during cuts.
- Soft Grip Handle: For comfortable operation.
Slika 3.1: Bližnji posnetek view of the 14-inch Oregon branded chain and guide bar, indicating its quality and low kickback design.
Image 3.2: Detail of the metal grip claws, providing improved stability and control during cutting operations.
4. Nastavitev
Before operating your chainsaw, ensure it is properly assembled and prepared.
4.1 Razpakiranje
Carefully remove all components from the packaging. Verify that all parts are present and undamaged. Refer to the parts list in your product documentation for a complete inventory.
4.2 Namestitev baterije
The GE-LC 36/35 Li Solo requires two 18V Einhell Power X-Change batteries (not included). Ensure batteries are fully charged before use.
- Locate the battery compartments on the chainsaw.
- Slide each charged battery into its respective compartment until it clicks securely into place.
- Za odstranitev pritisnite gumb za sprostitev na bateriji in jo izvlecite.
Image 4.1: Hands demonstrating the correct method for inserting a Power X-Change battery into the chainsaw's battery slot.
Image 4.2: A graphic clearly stating that the battery and charger are not included with the 'Solo' version of the product.
4.3 Chain and Bar Assembly & Tensioning
The chainsaw features tool-free chain tension adjustment.
- Prepričajte se, da je zavora verige sproščena.
- Loosen the side cover knob by turning it counter-clockwise.
- Verigo namestite okoli verižnika in vodilne meča ter pazite, da so rezalni robovi obrnjeni v pravilno smer.
- Fit the guide bar and chain onto the chainsaw body, aligning the bar studs.
- Tighten the side cover knob slightly.
- Adjust chain tension by turning the tensioning wheel (usually located near the side cover knob) until the chain is snug against the guide bar but can still be pulled freely by hand. There should be no more than 2-3mm of sag in the middle of the bar.
- Fully tighten the side cover knob.
Image 4.3: A visual representation of the tool-free chain tensioning mechanism, highlighting the ease of adjustment without additional tools.
4.4 Chain Oil Filling
The chainsaw has an automatic chain lubrication system, but the oil reservoir must be filled before use.
- Motorno žago postavite na ravno površino.
- Unscrew the oil tank cap (refer to Image 4.4).
- Rezervoar napolnite z visokokakovostnim oljem za verige in meče. Ne uporabljajte odpadnega olja ali motornega olja.
- Varno namestite pokrovček.
Image 4.4: Close-up of the oil tank cap, indicating its location for refilling the automatic chain lubrication system.
5. Navodila za uporabo
Follow these steps for safe and effective operation of your chainsaw.
5.1 Zagon in zaustavitev
- Ensure batteries are installed and chain oil reservoir is full.
- Disengage the chain brake by pulling the lever back towards the front handle.
- Press the safety lock-off button (if present) and then squeeze the trigger switch to start the chainsaw.
- To stop, release the trigger switch. Engage the chain brake immediately after stopping the cut or when moving between cuts.
5.2 Tehnike rezanja
- Načrtovanje reza: Before cutting, assess the wood for stability, potential kickback, and pinch points.
- Izdelava reza: Allow the chain to reach full speed before contacting the wood. Apply light pressure and let the saw do the work.
- Sečnja majhnih dreves: For felling, make a directional notch on the side of the desired fall, then make the felling cut from the opposite side, slightly above the notch.
- Udiranje: Work from the bottom up, supporting the branch to prevent pinching.
Image 5.1: A user demonstrating safe operation of the chainsaw, wearing appropriate PPE and cutting a log on a sawhorse.
6. Vzdrževanje
Redno vzdrževanje zagotavlja optimalno delovanje in podaljšuje življenjsko dobo vaše motorne žage.
6.1 Nastavitev napetosti verige
Check chain tension frequently, especially during initial use. A loose chain can derail, and a tight chain can cause excessive wear. Adjust as described in Section 4.3.
Image 6.1: Close-up of the chain tension adjustment knob, illustrating the mechanism for tool-free chain tensioning.
6.2 Mazanje verige
The chainsaw features automatic chain lubrication. Regularly check the oil level in the reservoir and refill as needed (refer to Section 4.4). Ensure the oil port is clear of debris.
Image 6.2: A visual representation of the automatic chain lubrication system, showing oil being dispensed onto the chain during operation.
6.3 Čiščenje in skladiščenje
- After each use, remove batteries and clean the chainsaw thoroughly. Remove sawdust and debris from the guide bar, chain, and motor housing.
- Motorno žago shranjujte na suhem in varnem mestu, izven dosega otrok.
- Always use the guide bar cover when storing or transporting the chainsaw.
7. Odpravljanje težav
Ta razdelek obravnava pogoste težave, na katere lahko naletite.
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Motorna žaga se ne zažene | Batteries not charged or improperly inserted; Chain brake engaged; Safety switch not pressed. | Charge and reinsert batteries; Disengage chain brake; Press safety lock-off button before trigger. |
| Veriga se ne premika | Chain brake engaged; Chain too tight; Obstruction. | Sprostite zavoro verige; Prilagodite napetost verige; Odstranite morebitne ovire. |
| Slaba učinkovitost rezanja | Topa veriga; Nepravilna napetost verige; Premalo olja za verigo. | Nabrusite ali zamenjajte verigo; Prilagodite napetost verige; Napolnite rezervoar za olje. |
| Prekomerne vibracije | Ohlapna veriga; Poškodovana veriga ali meč. | Prilagodite napetost verige; Preverite verigo in vodilo za morebitne poškodbe in ju po potrebi zamenjajte. |
If problems persist, contact Einhell customer support or a qualified service technician.
8. Specifikacije
| Funkcija | Podrobnost |
|---|---|
| Model | GE-LC 36/35 Li Solo (4501780) |
| Vir napajanja | Battery Powered (2 x 18V Power X-Change batteries required for 36V operation) |
| voltage | 36 volta |
| Konjska moč | 5 KM |
| Dolžina verige | 14 palcev |
| Hitrost verige | Approximately 15 m/s |
| Teža predmeta | 3.94 kilograma (8.67 funta) |
| Proizvajalec | EINHELL |
Image 8.1: A graphic illustrating the chain speed of 15 meters per second, indicating efficient cutting performance.
9. Garancija in podpora
For warranty information, product registration, or technical support, please refer to the official Einhell webspletno mesto ali se obrnite na njihovo službo za pomoč strankam. Shranite račun kot dokazilo o nakupu.
Za dodatno pomoč obiščite Uradnik Einhella webmesto.
