Konec izdelkaview
The Crosby Terminator® Wedge Socket, model S-421T, is engineered for secure and efficient termination of wire ropes. Specifically designed for 1/2" wire size, this painted wedge socket ensures a precise and stable connection. Its design integrates seamlessly with closed swage and spelter sockets, and it features a mechanism to secure the "dead end" of the wire rope, preventing accidental dislodgement of the wedge. This innovative design eliminates the need for additional rope, simplifying rigging operations.
Image: Components of the Crosby Terminator® Wedge Socket. Shown are the main red socket body, a separate red wedge piece, and a silver wire rope clip, illustrating the parts involved in securing a wire rope.
Nastavitev in namestitev
Proper installation of the Terminator® Wedge Socket is crucial for safety and performance. Follow these steps carefully:
- Preglejte komponente: Before installation, thoroughly inspect all components of the wedge socket (socket body, wedge, and pin) for any signs of damage, wear, or deformation. Ensure the 1/2" wire size compatibility.
- Prepare Wire Rope: Ensure the end of the wire rope is clean and free from burrs. For optimal performance, the wire rope should be of XXIP strength, as the socket has an efficiency rating of 80% based on this standard.
- Insert Wire Rope: Feed the live end of the wire rope through the socket body.
- Position Wedge: Insert the wedge into the socket body, ensuring the wire rope's "dead end" is positioned correctly within the wedge. The design secures this tail, eliminating the risk of "punch out" and loss of the wedge.
- Varnostni PIN: Insert the pin through the socket body and the wedge, securing it with the retaining mechanism. Ensure the pin diameter and jaw opening allow for proper integration, especially if used with closed swage or spelter sockets.
- Preverite namestitev: After assembly, apply a light load to seat the wedge firmly. Visually inspect the assembly to confirm all components are correctly seated and secured.
This product is designed for easy installation, eliminating the need for an extra piece of rope for securing the dead end.
Navodila za delovanje
The Crosby Terminator® Wedge Socket is designed for use in various lifting and rigging applications. Adhere to the following guidelines for safe operation:
- Uporaba obremenitve: Always apply loads gradually and smoothly. Avoid shock loading, which can compromise the integrity of the wire rope and socket.
- Omejitev delovne obremenitve (WLL): Never exceed the stated Working Load Limit (WLL) for the specific wire rope and socket combination. Refer to the wire rope manufacturer's specifications for WLL.
- Poravnava: Ensure the line of pull is always straight and aligned with the socket. Side loading can cause undue stress and potential failure.
- Okoljski pogoji: Be aware of environmental factors such as extreme temperatures, corrosive atmospheres, or abrasive conditions that may affect the performance and lifespan of the socket.
Vzdrževanje
Regular maintenance is essential to ensure the longevity and safe operation of your Crosby Terminator® Wedge Socket.
- Rutinski pregled: Conduct daily or pre-use inspections for any signs of wear, corrosion, cracks, deformation, or damage to the socket body, wedge, and pin. Pay close attention to the area where the wire rope exits the socket.
- Čiščenje: Keep the socket clean and free from dirt, debris, and corrosive substances. Use a mild cleaner and dry thoroughly.
- Mazanje: While the socket itself does not require lubrication, ensure the wire rope is properly lubricated according to its manufacturer's recommendations.
- Shranjevanje: Store the wedge socket in a clean, dry environment when not in use to prevent corrosion and damage.
- Zamenjava: Replace the wedge socket immediately if any damage or excessive wear is detected. Do not attempt to repair damaged components.
Odpravljanje težav
This section addresses common issues that may arise during the use of the Terminator® Wedge Socket.
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Wedge not seating properly | Incorrect wire rope size; debris in socket; damaged wedge or socket. | Verify wire rope is 1/2" size. Clean socket and wedge. Inspect for damage and replace if necessary. Apply light load to seat. |
| Wire rope slipping | Improper installation of dead end; worn wedge; incorrect wire rope type. | Re-install, ensuring dead end is secured by the wedge. Inspect wedge for wear and replace if needed. Ensure wire rope is compatible. |
| Socket shows signs of deformation | Overloading; shock loading; side loading. | Immediately remove from service. Do not attempt to repair. Replace the socket. Review loading procedures. |
Specifikacije
- Ime izdelka: Terminator® Wedge Socket
- Model: S-421T
- Številka modela artikla: 1035009
- Znamka: Crosby
- Združljivost velikosti žice: 1/2 palca
- Ocena učinkovitosti: 80% (based on catalog strength of XXIP wire rope)
- Dimenzije izdelka: 9 x 3 x 3 palcev
- Teža artikla: 6 funta
- Proizvajalec: Crosby Group
- ASIN: B07C7ZWZVM
- Prvi razpoložljivi datum: 15. januar 2013
Garancija in podpora
For information regarding product warranty, technical support, or service, please contact Crosby Group directly or refer to their official website. Always ensure you are using genuine Crosby replacement parts for any maintenance or repair to maintain product integrity and safety standards.
Za dodatno pomoč se lahko obrnete tudi na Trgovina Crosby na Amazonu.
