Knightsbridge CU4200 Curved Edge 10A 6 Gang 2 Way Switch User Manual

1. Uvod

Thank you for choosing the Knightsbridge CU4200 Curved Edge 10A 6 Gang 2 Way Switch. This manual provides essential information for the safe installation, operation, and maintenance of your new electrical switch. Please read these instructions carefully before installation and retain them for future reference.

2. Varnostne informacije

OPOZORILO: Electricity can be dangerous. Installation must be carried out by a qualified electrician or competent person in accordance with the latest IEE Wiring Regulations (BS7671) and local building regulations.

• Always isolate the mains power supply before commencing any electrical work.
• Ensure the circuit is dead using a suitable voltage tester, preden se dotaknete katere koli žice.
• Ta izdelek je zasnovan samo za uporabo v zaprtih prostorih.
• Do not exceed the rated current of 10 Amperes.
• Ensure all connections are secure and correctly wired.
• Če ste v dvomih, se posvetujte z usposobljenim električarjem.

3. Vsebina paketa

Preverite, ali so vse komponente prisotne in nepoškodovane:

• 1 x Knightsbridge CU4200 6 Gang 2 Way Switch Unit
• 2 x pritrdilni vijaki

4. Izdelek je končanview

The Knightsbridge CU4200 is a 6-gang, 2-way light switch designed for controlling up to six separate lighting circuits from one or two locations. It features a curved edge design and a white finish.

Slika 1: Spredaj view of the Knightsbridge CU4200 6 Gang 2 Way Switch. This image shows the white faceplate with six individual rocker switches arranged in two rows of three.

Slika 2: Zadaj view of the switch unit, displaying the terminal blocks for electrical connections. Each switch module has terminals labeled 'COM', 'L1', and 'L2'. The text 'MADE IN CHINA' is visible.

Slika 3: Detailed close-up of the wiring terminals. Each switch module clearly shows screw terminals for 'COM' (Common), 'L1' (Switched Live 1), and 'L2' (Switched Live 2), indicating its 2-way functionality. The rating '10AX 250V' is also visible.

Slika 4: Technical drawing illustrating the dimensions of the switch. The drawing indicates a width of 146mm, a height of 86mm, and a depth of 21mm to the back base.

5. Namestitev

Preden začnete: Ensure the mains power supply to the circuit you are working on is switched off at the consumer unit/fuse box and secured against accidental re-connection. Use a suitable voltagtester za potrditev, da je tokokrog mrtev.

Wiring Instructions (2-Way Switching)

The CU4200 is a 2-way switch, meaning each gang can control a light from two different locations. Refer to Slika 2 in Slika 3 for terminal identification.

1. Pripravite žice: Carefully strip the insulation from the ends of the circuit wires (Live, Neutral, Earth, and Switched Lives/Strappers) to expose approximately 10-12mm of copper conductor.
2. Priključek ozemljitve: Connect the bare copper or green/yellow insulated Earth wire from the circuit to the Earth terminal on the back box (if applicable) and ensure continuity. The switch itself does not have an Earth terminal as it is a Class II product (double insulated), but the metal back box must be earthed.
3. Common (COM) Connection: For each switch gang, connect the permanent live wire (usually brown or red) to the 'COM' terminal. If multiple gangs share a common live feed, a short link wire may be used between the 'COM' terminals of adjacent switches.
4. Switched Live (L1 & L2) Connections:
   • For 2-Way Switching: Connect the two 'strapping' wires (often brown with red/yellow sleeves or grey/black) between the 'L1' and 'L2' terminals of this switch and the corresponding 'L1' and 'L2' terminals of the other 2-way switch controlling the same light.
   • The switched live wire going to the light fitting should be connected to either 'L1' or 'L2' on one of the 2-way switches (typically the one where the light feed originates).
5. Varne povezave: Ensure all wires are fully inserted into their respective terminals and the terminal screws are tightened firmly. Tug gently on each wire to confirm it is secure.
6. Montaža: Carefully position the switch unit into the wall box, ensuring no wires are trapped or pinched. Secure the switch to the wall box using the provided fixing screws.
7. Prednja plošča: Attach the faceplate to the switch unit.
8. Obnovi moč: Once installation is complete and all connections are checked, restore the mains power supply at the consumer unit/fuse box.

6. Navodila za uporabo

To operate the switch, simply press the top or bottom of each rocker switch to toggle the connected light circuit on or off. In a 2-way setup, the light can be switched from either the CU4200 or the other connected 2-way switch.

7. Vzdrževanje

The Knightsbridge CU4200 switch requires minimal maintenance. To clean the surface, wipe with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as these may damage the finish. Ensure power is off before cleaning.

8. Odpravljanje težav

If the switch is not functioning correctly, consider the following:

• No Power to Light: Check the circuit breaker or fuse at the consumer unit. Ensure all wiring connections are secure and correct (refer to Section 5).
• Občasno delovanje: Loose wiring connections are a common cause. Isolate power and re-check all terminal screws.
• Switch Feels Loose: Ensure the fixing screws securing the switch to the wall box are tightened.

Če težave po preverjanju teh točk ne izginejo, se posvetujte z usposobljenim električarjem.

9. Specifikacije

10. Garancija in podpora

This product is manufactured to high standards and is covered by a standard manufacturer's warranty. For specific warranty details, technical support, or to report any issues, please contact Knightsbridge customer service or refer to their official website. Please have your model number (CU4200) and purchase information available when contacting support.

Knightsbridge Contact Information: Please visit the official Knightsbridge webspletno mesto za najnovejše kontaktne podatke.