Mackie MDB-USB Signal Direct Box Instruction Manual

1. Uvod in konecview

The Mackie MDB-USB is a bus-powered stereo direct box designed to seamlessly integrate computer audio into analog sound systems. It functions as a high-resolution audio interface, converting digital audio signals into clean, balanced stereo output, free from noise and distortion. This device eliminates the need to rely on a computer's headphone jack for professional audio connections, offering enhanced versatility with features like output level control, a dedicated headphone output, and a mono sum option. The analog outputs are dual XLR with a ground lift switch for optimal signal integrity. A USB cable is included for immediate connectivity.

• Direct USB Connectivity: Connect your computer directly via USB for audio transfer.
• Zvok visoke ločljivosti: Supports 24-bit/96kHz audio for pristine sound quality.
• Uravnoteženi XLR izhodi: Provides professional-grade balanced XLR outputs with ground lift.
• Napajanje z avtobusom: Operates solely on power supplied by your computer's USB port.

2. Nastavitev in povezave

Follow these steps to set up your MDB-USB Signal Direct Box:

1. Povežite se z računalnikom: Use the included USB cable to connect the MDB-USB to an available USB port on your computer. The device is bus-powered and does not require an external power supply.
2. Avdio izhodna povezava: Connect the dual XLR outputs (Left and Right) of the MDB-USB to the balanced inputs of your mixer, audio interface, or PA system using standard XLR cables.
3. Spremljanje slušalk: For direct monitoring, connect your headphones to the dedicated headphone output jack on the MDB-USB.
4. Dvigalo: If you experience hum or ground loop noise, engage the Ground Lift switch located between the XLR outputs. This can help eliminate unwanted noise.
5. Konfiguracija programske opreme: On your computer, select the MDB-USB as the audio output device in your operating system's sound settings and your preferred audio software.

3. Navodila za uporabo

The MDB-USB offers straightforward controls for managing your audio signal:

• Nadzor ravni: Adjust the output level of the MDB-USB using the dedicated knob. This controls the signal sent to your mixer or PA system.
• Glasnost slušalk: A separate volume control is provided for the headphone output, allowing independent monitoring level adjustment.
• Mono Sum Switch: Engage the Mono Sum switch to combine the left and right stereo signals into a single mono output. This is useful for systems that only support mono input or for checking mono compatibility.
• Stikalo za dvig tal: As mentioned in the setup, use this switch to break ground loops and eliminate hum. Toggle it to the position that provides the cleanest audio signal.

For a visual demonstration of the Mackie MDB series, including the MDB-USB, refer to the video below:

4. Vzdrževanje

To ensure the longevity and optimal performance of your Mackie MDB-USB, follow these simple maintenance guidelines:

• Čiščenje: Use a soft, dry cloth to wipe down the exterior of the unit. Avoid using abrasive cleaners, solvents, or waxes, as these can damage the finish and internal components.
• Shranjevanje: When not in use, store the MDB-USB in a cool, dry place, away from direct sunlight and extreme temperatures. Protect it from dust and moisture.
• Ravnanje: Handle the unit with care. While built robustly, dropping or subjecting it to strong impacts can cause damage.
• Upravljanje kablov: Ensure all cables connected to the MDB-USB are not excessively bent or strained, which can lead to cable failure or damage to the unit's ports.

5. Odpravljanje težav

If you encounter issues with your MDB-USB, consult the following common troubleshooting tips:

• Brez zvočnega izhoda:
  • Ensure the MDB-USB is correctly connected to your computer via USB and recognized as an audio device.
  • Verify that the MDB-USB is selected as the output device in your computer's sound settings and your audio software.
  • Check all cable connections (USB, XLR, headphones) for secure fit.
  • Increase the output level on the MDB-USB and the input gain on your mixer/PA system.
• Hum or Buzzing Noise:
  • Engage the Ground Lift switch on the MDB-USB.
  • Ensure all audio equipment is connected to the same electrical outlet or power conditioner to avoid ground loops.
  • Test with different cables to rule out faulty wiring.
• Popačen zvok:
  • Reduce the output level on the MDB-USB or the input gain on your mixer/PA system to prevent clipping.
  • Check your computer's audio output level to ensure it's not too high.
• Slušalke ne delujejo:
  • Ensure headphones are fully plugged into the headphone jack.
  • Adjust the headphone volume knob on the MDB-USB.
  • Test with another pair of headphones to confirm they are functional.

6. Specifikacije

7. Garancija in podpora

For warranty information, technical support, or service inquiries, please refer to the official Mackie webspletno mesto ali se obrnite neposredno na njihovo podporo strankam. Račun shranite kot dokazilo o nakupu za uveljavljanje garancije.