Audio System CO-600.5 High-Performance 5-Channel Class A/B Ampuporabniški priročnik za lifier

1. Uvod

This user manual provides comprehensive instructions for the installation, operation, and maintenance of your Audio System CO-600.5 High-Performance 5-Channel Class A/B Amplifier. To ensure optimal performance and safety, please read this manual thoroughly before using the product and retain it for future reference.

2. Varnostne informacije

General Product Safety according to EU Regulation 2023/2028:

• Observe the manufacturer's instructions and operating instructions for switching off the power supply to the vehicle and in the retrofit products.
• The supply line to the retrofit product must not be longer than 30cm from the operating battery.
• Fasten retrofit devices and accessories properly.
• It is recommended that the retrofit devices/accessories be installed by a specialist workshop. Otherwise, product or vehicle damage and fire can occur.

Always disconnect the vehicle's battery before performing any installation or maintenance work to prevent electrical shock or damage.

3. Izdelek je končanview

The Audio System CO-600.5 is a high-performance 5-channel Class A/B amplifier designed for car audio systems. It features switchable High-Pass (HP) and Low-Pass (LP) filters, a full active mode, and includes a wired RTC remote control for convenient adjustments. The amplifier supports an input sensitivity range of 0.2V to 6V and includes a high-level RCA input with automatic turn-on capability.

Ključne značilnosti:

• 5-kanalni razred A/B Amplifier
• Switchable High-Pass (HP) and Low-Pass (LP) Filters
• Full Active Mode
• Wired RTC Remote Control Included
• Input Sensitivity: 0.2V - 6V
• High-Level RCA Input with Auto-On
• Power Output: 4 x 60W RMS (4 Ohm) / 4 x 85W RMS (2 Ohm) and 1 x 250W RMS (4 Ohm mono) / 1 x 350W RMS (2 Ohm mono)

Izdelek Views

Slika 3.1: Zgornji del view of the CO-600.5 amplifier, highlighting its sleek design and branding.

Slika 3.2: Spredaj view od amplifier, displaying the cooling fins.

Slika 3.3: Zadaj view od amplifier, detailing the power input (GND, REM, +12V) and speaker output terminals.

Figure 3.4: Input and control panel, featuring RCA inputs, gain level adjustments, and crossover frequency controls.

Slika 3.5: Pod kotom view providing a comprehensive look at both connection sides of the amplifier.

4. Nastavitev in namestitev

Pravilna namestitev je ključnega pomena za delovanje in dolgo življenjsko dobo vašega amplifier. It is highly recommended that installation be performed by a qualified professional.

4.1 Mesto pritrditve

• Izberite suho, dobro prezračeno mesto, stran od neposredne sončne svetlobe in virov toplote.
• Zagotovite zadosten pretok zraka okoli ampzračnik za pravilno hlajenje.
• Namestite amplifier securely to a solid surface using appropriate hardware to prevent movement during vehicle operation.

4.2 Žične povezave

Pred kakršnimi koli priklopi odklopite negativni pol akumulatorja vozila.

• Moč (BATT+): Connect a fused power cable directly from the vehicle's positive battery terminal to the +12V terminal on the amplifier. Ensure the fuse is located within 30cm of the battery.
• Ozemljitev (GND): Connect a ground cable of the same gauge as the power cable to a clean, unpainted metal surface on the vehicle chassis. The connection point must be free of rust and paint.
• Daljinski upravljalnik (REM): Priključite žico za daljinski vklop iz izhoda za daljinski upravljalnik glavne enote na priključek REM na amplifier. This will turn the ampvklop in izklop sistema za odpravljanje težav z glavno enoto.
• RCA vhodi: Priključite RCA izhode glavne enote na amplifier's RCA inputs (CH1/2, CH3/4, SUB IN).
• Izhodi za zvočnike: Connect your speakers to the corresponding speaker output terminals (CH1, CH2, CH3, CH4, SUBWOOFER). Observe correct polarity (+ to + and - to -).

5. Navodila za uporabo

Ko je amplifier is correctly installed and wired, you can proceed with initial setup and operation.

5.1 Začetni vklop

• Ponovno priključite negativni pol akumulatorja vozila.
• Vklopite glavno enoto. amplifier should power on automatically via the remote wire. The power indicator LED on the amplifier should illuminate.

5.2 Prilagoditev stopnje ojačanja

The gain control (LEVEL) matches the amplifier's input sensitivity to the output of your head unit. This is not a volume control.

• Nastavite amplifier's gain control to minimum (fully counter-clockwise).
• Glasnost glavne enote nastavite na približno 75-80 % največje glasnosti.
• Počasi povečajte ampZmanjšajte ojačanje na zvočniku, dokler ne zaslišite rahlega popačenja, nato pa ga nekoliko zmanjšajte, dokler zvok ni čist.

5.3 Crossover Settings (X-OVER)

The CO-600.5 features switchable HP (High-Pass) and LP (Low-Pass) filters for precise sound tuning.

• HPF (visokoprepustni filter): Allows frequencies above the set point to pass through. Use for full-range speakers to prevent low frequencies that can cause distortion.
• LPF (nizkopasovni filter): Allows frequencies below the set point to pass through. Use for subwoofers to prevent high frequencies.
• Adjust the crossover frequencies (e.g., 50Hz-250Hz for HPF, 30Hz-250Hz for LPF) according to your speaker specifications and listening preferences.

5.4 RTC Remote Control

The included wired RTC remote control allows for convenient adjustment of the subwoofer level from the driver's seat.

6. Vzdrževanje

The Audio System CO-600.5 ampOdbijač zahteva minimalno vzdrževanje.

• Obdrži ampČistilnik mora biti čist in brez prahu. Za čiščenje uporabite mehko, suho krpo.
• Zagotovite, da so vse povezave trdne. Občasno preverite ožičenje glede morebitnih znakov obrabe ali korozije.
• Ne uporabljajte agresivnih kemikalij ali abrazivnih čistil na amplifier.

7. Odpravljanje težav

Če imate težave z vašim ampza reševanje težav glejte naslednje pogoste težave in rešitve:

If the problem persists after attempting these solutions, please contact Audio System customer support or a qualified car audio technician.

8. Specifikacije

9. Garancija in podpora

For warranty information, please refer to the documentation provided with your purchase or contact your authorized Audio System dealer. Warranty terms and conditions may vary by region and retailer.

For technical support, service, or inquiries regarding spare parts, please contact Audio System customer service directly or visit their official website. Contact information is typically available on the product packaging or the manufacturer's webmesto.

Proizvajalec: Avdio sistem

Naslov proizvajalca: JRS Labs - The Art of Sound, Heinrich-Heine-Straße 13A, 63329 Rödermark