1. Uvod
The SEBSON Outdoor Motion Detector (Model IR_OUT_A) is designed for automatic lighting control in outdoor areas. It features an infrared sensor to detect movement and activate connected lights, enhancing security and convenience. This manual provides essential information for safe installation, operation, and maintenance of your device.
Image 1.1: SEBSON Outdoor Motion Detector (Model IR_OUT_A)
2. Varnostna navodila
- OPOZORILO: Electrical installation should only be performed by a qualified electrician. Incorrect installation can lead to electric shock or fire.
- Always disconnect the main power supply before attempting any installation, wiring, or maintenance work on the device.
- Ensure proper grounding of the device according to local electrical codes.
- Do not exceed the maximum load ratings specified for incandescent (800W) or LED/energy-saving lamps (400W).
- This device is rated IP44 for outdoor use, providing protection against splashing water. However, avoid direct exposure to strong jets of water or submersion.
- Do not open or modify the device. There are no user-serviceable parts inside.
3. Izdelek je končanview in funkcije
The SEBSON Outdoor Motion Detector is a reliable solution for automated outdoor lighting. Key features include:
- Namestitev: Designed for outdoor surface wall mounting.
- Združljivost napajanja: Supports up to 800W for incandescent bulbs and 400W for LED or other energy-saving lamps.
- Območje zaznavanja: Features a 12-meter range and a 180° detection angle.
- Nastavljiv senzor: The sensor head can be adjusted 40° vertically and 100° horizontally for precise coverage.
- Operating Duration (TIME): Nastavljivo od 10 sekund do 15 minut.
- Ambient Brightness (LUX): Adjustable threshold from 3 to 2000 lux for activation.
- Ožičenje: 3-wire connection for reliable operation.
Image 3.1: Key specifications of the motion detector.
4. Specifikacije
| Proizvajalec | SEBSON |
| Številka modela | IR_OUT_A |
| Dimenzije (D x Š x V) | 79 x 55.5 x 67.5 mm |
| Teža | 100 gramov |
| barva | Bela |
| Material | Plastika |
| Vrsta napajanja | Izmenični tok (AC) |
| voltage | 230 volta |
| Max. Power (LED) | 400 vatov |
| Max. Power (Incandescent) | 800 vatov |
| Način namestitve | Stenski nosilec (površinski) |
| Združljivost tipov žarnic | LED |
| Obseg zaznavanja | 12 metrov / 180° |
| Posebne lastnosti | Adjustable, Programmable, 3-wire |
| Uporabno okolje | Na prostem |
| Delovna temperatura | Do 40°C |
| Ocena IP | IP44 |
5. Namestitev
Za pravilno namestitev sledite tem korakom:
- Priprava: Prepričajte se, da je glavno napajanje območja namestitve izklopljeno z odklopnikom.
- Lokacija namestitve: Choose a stable, flat surface for wall mounting. The recommended mounting height is between 1.80m and 2.50m for optimal detection performance.
- Montaža podstavka: Use the provided screws and wall plugs to securely attach the detector's base to the wall. Ensure the base is level.
- Ožičenje: Connect the three electrical wires (Live, Neutral, Load) from your power supply and light fixture to the corresponding terminals on the motion detector. Refer to the wiring diagram provided with the product for exact connections. Ensure all connections are secure.
- Attach Detector Body: Once wiring is complete, carefully attach the main body of the motion detector to its mounted base.
- Adjust Sensor Head: The sensor head can be adjusted to cover the desired detection area. It can be tilted 40° vertically and rotated 100° horizontally. Adjust the sensor to avoid detecting unwanted movement (e.g., from public pathways or trees).
- Obnovi moč: After completing all installation steps and ensuring all connections are secure, restore power to the circuit.
Slika 5.1: Spodaj view s pritrdilnimi točkami.
Image 5.2: Sensor head adjustment angles.
6. Navodila za uporabo
The motion detector features two adjustable dials for customization:
- LUX (Ambient Brightness) Adjustment:
This dial controls the ambient light level at which the detector becomes active.- Turn the dial towards the '3' (moon symbol) setting for activation only in dark conditions (e.g., at night).
- Turn the dial towards the '2000' (sun symbol) setting for activation in brighter conditions (e.g., during the day or in twilight).
- TIME (Operating Duration) Adjustment:
This dial sets how long the connected light remains on after motion is detected and no further motion is sensed.- Adjust the dial to set the duration from a minimum of 10 seconds to a maximum of 15 minutes.
Image 6.1: LUX and TIME adjustment dials.
Image 6.2: Detection range and dial settings overview.
7. Vzdrževanje
To ensure optimal performance and longevity of your SEBSON motion detector, follow these maintenance guidelines:
- Čiščenje: Regularly clean the sensor lens and the device's exterior with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic and sensor.
- Pregled: Periodically check the device for any signs of damage, loose connections, or wear. Ensure the mounting is still secure.
- Ovire: Ensure that no new obstructions (e.g., growing plants, new installations) are blocking the sensor's field of view, which could affect its detection capability.
- Odklop napajanja: Always disconnect power before performing any cleaning or inspection that requires touching electrical components.
8. Odpravljanje težav
If you encounter issues with your motion detector, refer to the following troubleshooting tips:
- Light does not turn on when motion is detected:
- Preverite, ali je glavno napajanje vklopljeno.
- Preverite, ali so vse ožičene povezave pravilne in varne.
- Adjust the 'LUX' setting. It might be set too high, preventing activation in current ambient light conditions. Try turning it towards the 'moon' symbol.
- Ensure there are no physical obstructions blocking the sensor's view.
- Test the connected light fixture independently to ensure the bulb is functional.
- Light stays on continuously or turns on without motion:
- Check the 'TIME' setting. If set to maximum, the light will stay on for a longer duration.
- Ensure there is no continuous motion within the detection area (e.g., swaying branches, pets).
- The 'LUX' setting might be too low, causing the detector to activate even in bright conditions. Adjust it towards the 'sun' symbol.
- Inspect for faulty wiring or a short circuit.
- Detection range is poor or inconsistent:
- Adjust the sensor head angle (vertical and horizontal) to optimize coverage.
- Ensure the mounting height is within the recommended range (1.80m - 2.50m).
- Clear any obstructions (e.g., dirt on the lens, plants, furniture) that might be interfering with the sensor.
- Extreme temperatures can sometimes affect sensor performance.
9. Garancija in podpora
SEBSON products are manufactured with quality and reliability in mind. While specific warranty details may vary by region and retailer, SEBSON typically offers a standard manufacturer's warranty against defects in materials and workmanship.
For technical support, warranty claims, or further assistance, please:
- Refer to the official SEBSON webspletno mesto za kontaktne podatke in vire podpore.
- Obrnite se na prodajalca, pri katerem ste izdelek kupili.
- Have your product model number (IR_OUT_A) and proof of purchase ready when contacting support.
