Navodila za uporabo kompleta za pnevmatike Kia Mobility (model 52933-2Y000)

Uvod

This manual provides essential instructions for the safe and effective operation, maintenance, and troubleshooting of your Kia Mobility KIT-TIRE (Model 52933-2Y000) tire compressor. Please read this manual thoroughly before using the product and retain it for future reference. Always refer to your vehicle's owner's manual for specific tire pressure recommendations and emergency procedures.

Pomembne varnostne informacije

• Do not use for sidewall punctures: This device is designed for temporary repair of tread punctures only. It is not suitable for punctures on the tire sidewall or for significant tire damage.
• Izogibajte se pregrevanju: Continuous operation can cause the compressor to overheat. Allow the unit to cool down if it becomes excessively hot during use.
• Pravilna voltage: Ensure the compressor is connected to a 12-volt DC power source, typically your vehicle's accessory outlet.
• Otroci in hišni ljubljenčki: Keep the compressor and its components away from children and pets.
• Zaščita oči: Wear appropriate eye protection when operating the compressor.
• Vehicle stability: Ensure your vehicle is parked on a level surface with the parking brake engaged before attempting any tire inflation.
• Tlak v pnevmatikah: Always inflate tires to the pressure specified in your vehicle's owner's manual or on the tire placard. Over-inflation can be dangerous.

For detailed visual instructions, refer to the diagram below:

Slika 1: Spredaj view of the Kia Mobility KIT-TIRE compressor, illustrating connection points, power switch, and operational steps.

Nastavitev

1. Prepare the vehicle: Park your vehicle on a flat, stable surface. Engage the parking brake and turn off the engine.
2. Locate the compressor: Remove the Kia Mobility KIT-TIRE compressor from its storage location.
3. Connect to tire valve: Unscrew the valve cap from the tire. Firmly screw the compressor's air hose connector onto the tire valve stem until secure.
4. Priključite na napajanje: Insert the compressor's power plug into your vehicle's 12V accessory outlet (cigarette lighter socket). Ensure the vehicle's ignition is in the "ACC" or "ON" position, or the engine is running, as required by your vehicle.

Navodila za uporabo

1. Začetni pregled tlaka: Before turning on the compressor, observe the current tire pressure reading on the integrated gauge.
2. Začetek inflacije: Flip the power switch on the compressor to the "ON" position. The compressor will begin to inflate the tire.
3. Nadzorni tlak: Continuously monitor the pressure gauge. Inflate the tire to the recommended pressure (e.g., 2.0-2.8 bar / 30-40 psi, or as specified in your vehicle's manual).
4. Ustavi inflacijo: Once the desired pressure is reached, immediately switch the compressor to the "OFF" position.
5. Prekini povezavo: Unscrew the air hose connector from the tire valve and replace the valve cap. Disconnect the power plug from the vehicle's 12V outlet.
6. Post-Inflation Driving (for temporary sealant use): If using the compressor with tire sealant for a temporary repair, drive the vehicle immediately for a short distance (e.g., 10 km / 6 miles) at a moderate speed (e.g., 20-80 km/h or 15-50 mph) to allow the sealant to distribute evenly.
7. Re-check Pressure: After driving, re-check the tire pressure. If the pressure has dropped significantly, the repair may not be effective, and professional assistance is required.

Vzdrževanje

• Čiščenje: Wipe the exterior of the compressor with a damp krpo. Ne uporabljajte agresivnih kemikalij in enote ne potapljajte v vodo.
• Shranjevanje: Store the compressor in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the hose and power cord are neatly coiled to prevent damage.
• Pregled: Periodically inspect the air hose, power cord, and connectors for any signs of wear, cracks, or damage. Do not use the unit if any components are damaged.

Odpravljanje težav

• Kompresor se ne vklopi:
  • Ensure the power plug is fully inserted into the 12V outlet.
  • Check the vehicle's 12V outlet fuse.
  • Verify the vehicle's ignition is in the correct position (ACC or ON).
• Počasna inflacija ali brez inflacije:
  • Ensure the air hose connector is securely attached to the tire valve.
  • Check for leaks in the air hose or connections.
  • Verify the tire valve stem is not damaged.
  • If the tire has a large puncture or sidewall damage, the compressor may not be able to inflate it.
• Kompresor se pregreva:
  • Preden nadaljujete z delovanjem, pustite, da se enota ohladi vsaj 10–15 minut.
  • Avoid continuous operation for extended periods.
• Netočen odčitek tlaka:
  • Prepričajte se, da je kompresor na stabilni površini.
  • Če je na voljo, primerjajte odčitek z znanim natančnim merilnikom tlaka v pnevmatikah.

Specifikacije

For additional technical details, refer to the product label shown below:

Slika 2: Hrbet view of the Kia Mobility KIT-TIRE compressor, showing model, power, and manufacturing details.

Informacije o garanciji

Specific warranty details for the Kia Mobility KIT-TIRE (Model 52933-2Y000) are not provided in this manual. Please refer to the warranty documentation included with your purchase or contact your authorized Kia dealer or the product seller for comprehensive warranty information.

Podpora uporabnikom

For technical assistance, service, or inquiries regarding your Kia Mobility KIT-TIRE, please contact your authorized Kia service center or the retailer from whom you purchased the product. Provide your model number (52933-2Y000) when seeking support to ensure accurate assistance.