Uporabniški priročnik za LED uro Adler AD 1186 s termometrom

Uvod

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Adler AD 1186 LED Clock with Thermometer. Please read this manual thoroughly before using the device to ensure proper function and longevity.

Varnostna navodila

• Poskrbite, da bo naprava postavljena na stabilno in ravno površino.
• Naprave ne izpostavljajte ekstremnim temperaturam, neposredni sončni svetlobi ali visoki vlažnosti.
• Napravo hranite ločeno od vode ali drugih tekočin.
• Uporabljajte samo navedeni napajalnik.
• Naprave ne poskušajte razstavljati ali popravljati sami. Za pomoč se obrnite na usposobljeno servisno osebje.
• Hraniti izven dosega otrok.

Vsebina paketa

Prosimo, preverite paket za naslednje artikle:

• Adler AD 1186 LED Clock with Thermometer
• Napajalni adapter
• Uporabniški priročnik (ta dokument)

Konec izdelkaview

Familiarize yourself with the components of your Adler AD 1186 LED Clock.

Slika 1: Spredaj View. This image shows the front of the Adler AD 1186 LED Clock. The large LED display clearly shows the time (e.g., 20:18), humidity percentage (e.g., 30% RH), and temperature in Celsius (e.g., 21°C). The Adler logo is visible below the time display.

Slika 2: Kontrolni elementi na zgornji plošči. This image provides a top-down angled view of the clock, highlighting the control buttons. From left to right, buttons include "SETTING", "TIME", "DATE", "ALARM", "SNOOZE" (large central button), "UP", "DOWN", and "DATE". These buttons are used for configuring the clock's various functions.

Slika 3: Zadnja plošča. This image displays the back of the Adler AD 1186 LED Clock. It shows the power input port for the adapter and a compartment for battery backup, ensuring timekeeping during power outages.

Ključne komponente:

• LED zaslon: Shows time, temperature, and humidity.
• Gumbi za upravljanje: Located on the top panel for setting time, date, alarm, and adjusting settings.
• Vhodna moč: Za priklop napajalnika.
• Predal za baterije: For backup batteries (type not specified, typically AAA or button cell).

Nastavitev

1. Razpakiraj: Previdno vzemite uro in vso dodatno opremo iz embalaže.
2. Napajalni priključek: Connect the provided power adapter to the DC input port on the back of the clock (refer to Figure 3). Plug the adapter into a standard electrical outlet. The LED display should illuminate.
3. Battery Backup (Optional but Recommended): Open the battery compartment on the rear of the clock. Insert the required backup batteries (e.g., 2x AAA, not included) according to the polarity markings. This will maintain time settings during power interruptions.

Navodila za uporabo

1. Nastavitev časa in datuma

1. Pritisnite ČAS button (refer to Figure 2). The hour digits will start flashing.
2. Uporabite UP in DOL gumbi za nastavitev ure.
3. Pritisnite ČAS again to confirm the hour and move to minute adjustment. The minute digits will flash.
4. Uporabite UP in DOL gumbe za nastavitev minut.
5. Pritisnite ČAS znova za potrditev zapisnika.
6. To set the date, press the DATUM button. The year will flash.
7. Uporaba UP in DOL to set the year, then press DATUM to move to month, and then day.
8. Pritisnite DATUM again to exit date setting mode.

2. Nastavitev alarma

1. Pritisnite ALARM button (refer to Figure 2). The alarm hour digits will flash.
2. Uporabite UP in DOL gumbe za nastavitev želene ure budilke.
3. Pritisnite ALARM again to confirm the hour and move to minute adjustment. The alarm minute digits will flash.
4. Uporabite UP in DOL gumbe za nastavitev želenih minut alarma.
5. Pritisnite ALARM again to activate the alarm. An alarm icon will appear on the display.
6. Za izklop alarma pritisnite ALARM gumb, dokler ikona alarma ne izgine.

3. Funkcija dremeža

Ko se oglasi alarm, pritisnite veliko DREMEŽ button (refer to Figure 2) to temporarily silence the alarm. The alarm will sound again after a few minutes (default snooze time is typically 5-9 minutes, refer to specific product details if available).

4. Nastavitev svetlosti

The clock features 2 brightness levels. Press the NASTAVITEV button (or a dedicated brightness button if present, otherwise cycle through settings) to cycle between the brightness levels. Adjust to your preferred visibility.

5. Prikaz temperature in vlažnosti

The clock automatically displays the current room temperature and humidity. No special setting is required for this function. The temperature is displayed in Celsius (°C) and humidity as a percentage (% relativne vlažnosti).

Vzdrževanje

• Čiščenje: Za čiščenje površine ure uporabite mehko, suho krpo. Ne uporabljajte abrazivnih čistil ali topil.
• Prah: Regularly dust the device to prevent accumulation, especially around vents if any.
• Zamenjava baterije: If using battery backup, replace batteries annually or when the display shows signs of dimming during power outages.

Odpravljanje težav

Specifikacije

Garancija in podpora

Adler products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your purchase or visit the official Adler website. For technical support or service inquiries, please contact Adler customer service through their official channels.

Za garancijske zahtevke shranite dokazilo o nakupu.