Elitech BT-3 Digital Hygrometer Thermometer Instruction Manual

Uvod

This manual provides comprehensive instructions for the Elitech BT-3 Digital Hygrometer Thermometer. This device is designed to accurately monitor both indoor and outdoor temperature, as well as indoor humidity levels, offering essential environmental data for various settings.

Lastnosti izdelka

• Digital Thermometer: Monitors indoor and outdoor temperature in both Fahrenheit (℉) and Celsius (℃). The measuring range is -58℉ to +158℉.
• Humidity Monitor: Measures indoor relative humidity (RH) within a range of 20% to 99%RH.
• MAX & MIN Records: Automatically stores and displays the maximum and minimum recorded values for indoor/outdoor temperature and indoor humidity.
• Clock Function and Alarming Function: Features a switchable 12 or 24-hour clock display and a settable alarm time.
• Three Mounting Options: Designed for versatility with tabletop, wall-mountable, and magnet-mountable options, allowing convenient placement.
• Indikator zračnega udobja: Displays the comfort level (DRY/COMFORT/WET) based on current indoor humidity, providing a quick assessment of air conditions.

Postavitev naprave

Slika 1: Spredaj view of the Elitech BT-3 unit, showing the LCD display with indoor/outdoor temperature, time, and humidity readings. Dimensions are indicated as 111mm height, 101mm width, and 23.5mm depth. A "MAX/MIN" button is visible at the bottom.

Slika 2: Zadaj view of the Elitech BT-3 unit, showing the battery compartment cover and control buttons: MODE, ADJ, CLEAR, RESET, and a ℃/℉ switch. A keyhole slot for wall mounting is also visible.

Slika 3: Zadaj view of the Elitech BT-3 unit, illustrating the foldable kickstand for tabletop use and the attached outdoor temperature probe with its long cable.

Slika 4: Od blizu view of the open battery compartment on the back of the Elitech BT-3 unit, showing the slot for a AAA battery (not included).

Nastavitev

Namestitev baterije

1. Poiščite pokrov predalčka za baterije na zadnji strani enote (glejte sliko 2).
2. Slide the cover off to open the compartment (refer to Figure 4).
3. Insert one AAA battery, ensuring the correct polarity (+/-) is observed. Note: Battery is not included.
4. Ponovno namestite pokrov prostora za baterije, tako da ga potisnete nazaj na svoje mesto.

Namestitev sonde

The outdoor temperature probe is connected to the main unit via a long cable. For accurate outdoor temperature readings, place the probe outside in a location that is protected from direct sunlight, rain, and other extreme weather conditions. Ensure the cable is routed safely and does not interfere with windows or doors.

Možnosti namestitve

The BT-3 offers flexible placement options:

• Namizna plošča: Extend the foldable kickstand on the back of the unit (refer to Figure 3) to place it securely on any flat surface.
• Montaža na steno: Utilize the keyhole slot on the back of the unit (refer to Figure 2) to hang it on a screw or nail on a wall.
• Namestitev z magnetom: The unit features built-in magnets, allowing it to be conveniently attached to metallic surfaces such as refrigerators or metal cabinets.

Navodila za uporabo

Vklop/izklop

The unit powers on automatically once the battery is installed. There is no dedicated power button. To turn off, remove the battery.

Temperature Unit Selection (℃/℉)

On the back of the unit, locate the small switch labeled "℃/℉" (refer to Figure 2). Slide this switch to toggle between Celsius and Fahrenheit temperature displays.

Nastavitev časa

1. Pritisnite NAČIN button (on the back) to cycle through display modes until the current time is shown.
2. Pritisnite in držite NAČIN button until the hour digit begins to flash.
3. Uporabite PRID button (on the back) to adjust the hour.
4. Pritisnite NAČIN again to move to the minute digit, then use PRID za prilagoditev minut.
5. Nadaljujte s pritiskom NAČIN to set the 12-hour (AM/PM) or 24-hour format.
6. Pritisnite NAČIN one last time to confirm settings and exit time setting mode.

Nastavitev alarma

1. Pritisnite NAČIN button until the alarm time is displayed (often indicated by an alarm clock icon).
2. Pritisnite in držite NAČIN button until the alarm hour digit flashes.
3. Uporabite PRID gumb za nastavitev budilke.
4. Pritisnite NAČIN again to move to the alarm minute digit, then use PRID za prilagoditev minut.
5. Pritisnite NAČIN še zadnjič za potrditev in izhod iz načina nastavitve alarma.
6. Za vklop ali izklop alarma pritisnite PRID button when the alarm time is displayed. An alarm icon will appear or disappear on the screen to indicate its status.

MAX/MIN Temperature and Humidity Records

Pritisnite MAX/MIN button (on the front of the unit) to view the maximum and minimum recorded indoor/outdoor temperatures and indoor humidity values.

• Pritisnite MAX/MIN button repeatedly to cycle through the current readings, maximum readings, and minimum readings.
• Za brisanje zapisov MAX/MIN pritisnite in držite ČISTO button (on the back of the unit) while the MAX/MIN readings are displayed.

Indikator zračnega udobja

The display includes an indicator that categorizes the indoor air comfort level based on humidity:

• SUHO: Indicates that the indoor humidity level is low.
• UDOBJE: Indicates that the indoor humidity level is within an optimal and comfortable range.
• MOKRO: Indicates that the indoor humidity level is high.

Vzdrževanje

• Čiščenje: Clean the unit with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the unit in water.
• Zamenjava baterije: Replace the AAA battery when the low battery indicator appears on the display to ensure continuous and accurate operation.
• Skrb za sondo: Keep the outdoor probe clean and free from dirt, dust, and debris.
• Okoljski pogoji: Avoid exposing the unit to extreme temperatures, direct sunlight, or excessively high humidity for prolonged periods, as this can affect accuracy and lifespan.

Odpravljanje težav

Netočni odčitki

• Namestitev sonde: Ensure the outdoor probe is correctly positioned and not exposed to direct sunlight, heat sources, or moisture, which can skew readings.
• Stabilizacijski čas: Allow the unit sufficient time (up to 30 minutes) to stabilize and provide accurate readings after initial setup or if it has been moved to a new environment.
• Raven baterije: Check the battery level and replace it with a fresh AAA battery if the indicator shows low power.

Zaslon ne deluje

• Preverjanje baterije: Verify that the battery is installed correctly with the proper polarity.
• Zamenjava baterije: Zamenjajte baterijo z novo AAA baterijo.
• Tovarniška ponastavitev: If the display remains unresponsive, perform a factory reset by pressing the PONASTAVI button on the back of the unit. This may require a small pointed object like a paperclip.

Specifikacije

Garancija in podpora

Elitech is committed to providing excellent customer service. The product comes with 24/7 US Technician Support available via email and phone.

For warranty claims, technical assistance, or any product-related inquiries, please contact Elitech customer service directly. Refer to the Elitech official webNajnovejše kontaktne podatke najdete na spletnem mestu ali embalaži izdelka.

Elitech Company Overview

Ta videoposnetek ponuja splošen pregledview of Elitech Technology Inc., its vision, and its range of HVAC/R tools and manufacturing capabilities. It is not specific to the BT-3 product operation but offers insight into the brand's commitment to innovation.