Uvod
Thank you for choosing the Project Source 2-Pack 7.4-in W White LED Flush Mount Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixtures. Please read this manual thoroughly before installation and retain it for future reference.
These LED flush mount ceiling lights are designed for both indoor and outdoor living spaces, featuring a wet-rated design. They are Energy Star rated for efficiency, provide a color temperature of 3000K, a Color Rendering Index (CRI) of 90, and an output of 730 lumens.
Varnostne informacije
Always follow basic safety precautions when installing or working with electrical fixtures to reduce the risk of fire, electric shock, or personal injury.
- OPOZORILO: Nevarnost električnega udara. Pred namestitvijo ali servisiranjem odklopite napajanje na varovalki ali odklopniku.
- OPOZORILO: Risk of fire. Use only in circuits rated for the fixture.
- Če niste prepričani o postopku namestitve, se posvetujte s kvalificiranim električarjem.
- Naprave ne spreminjajte na noben način. Kakršne koli spremembe lahko razveljavijo garancijo in povzročijo varnostno tveganje.
- Prepričajte se, da so vse povezave varne in ustrezno izolirane.
- Do not install near heat sources or in areas with excessive moisture beyond its wet-rated capabilities.
- This product is designed for direct wire connection and does not use a plug.
Kaj je v škatli
Pred začetkom namestitve preverite, ali so prisotne vse komponente:
- 2 x Project Source 7.4-in LED Flush Mount Light Fixtures
- Montažna oprema
- Daljinec (Note: While the product data mentions a remote control, typical flush mount lights of this type do not include one. Please verify your specific package contents.)
Namestitev
Installation should be performed by a qualified individual. Always ensure power is disconnected at the circuit breaker before starting.
- Izklopite napajanje: Locate the circuit breaker controlling the light fixture's location and turn it off. Verify power is off using a voltage tester.
- Pripravite montažno površino: Prepričajte se, da je električna omarica varno nameščena in da lahko prenese težo svetilke.
- Povežite žice: Connect the fixture's wires to the corresponding house wires using wire nuts (typically black to black, white to white, and ground to ground). Ensure all connections are tight and secure.
- Pritrdilni element: Carefully align the fixture with the mounting holes on the electrical box and secure it using the provided mounting hardware.
- Obnovi moč: Ko je svetilka varno nameščena, ponovno vzpostavite napajanje na odklopniku.
Image: Two Project Source 7.4-inch white LED flush mount ceiling lights, showcasing their compact and low-profile design suitable for various indoor and outdoor applications.
Navodila za uporabo
The Project Source LED Flush Mount Light operates like a standard ceiling light fixture. Once properly installed and power is restored, it can be controlled via a standard wall switch.
- Vklop/izklop: Flip the wall switch connected to the fixture to turn the light on or off.
- Energijska učinkovitost: As an Energy Star rated LED fixture, it consumes significantly less energy than traditional incandescent bulbs, providing long-term savings.
Vzdrževanje
These LED fixtures require minimal maintenance due to their long lifespan. However, occasional cleaning is recommended to maintain optimal light output and appearance.
- Čiščenje: Pred čiščenjem se prepričajte, da je napajanje izklopljeno. Uporabite mehko, suho ali rahlo mehko krpo.amp cloth to wipe the surface of the fixture. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
- Življenjska doba LED diode: The integrated LED light source is designed for long-term use and is not user-replaceable. If the LED fails, the entire fixture typically requires replacement.
Odpravljanje težav
Če imate težave s svetilko, si oglejte naslednje pogoste težave in rešitve:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Luč se ne vklopi. | Ni napajanja svetilke; ohlapna ožičenje; okvarjeno stikalo. | Preverite odklopnik. Prepričajte se, da so vse žične povezave varne. Preizkusite stensko stikalo. |
| Svetloba utripa. | Loose wiring; incompatible dimmer switch (if applicable); power fluctuations. | Verify wire connections. Ensure the fixture is not connected to an incompatible dimmer. Consult an electrician for power issues. |
| Svetlobni izhod je šibek ali neenakomeren. | Dust accumulation on diffuser; aging LED components. | Clean the diffuser. If the issue persists and the fixture is old, it may be reaching the end of its lifespan. |
| Naprava brni. | Loose mounting; electrical interference. | Ensure fixture is securely mounted. Consult an electrician if noise persists. |
Specifikacije
- Številka modela: CLL56-2WW
- Dimenzije izdelka: 7.4 x 7.4 x 1.4 palcev
- Teža: 2.15 Pounds (per pack, total for 2 lights)
- Znamka: Vir projekta
- barva: Bela
- Oblika svetilke: Strop (vgradna montaža)
- Notranja/zunanja uporaba: Indoor/Outdoor (Wet Rated)
- vir energije: Električni kabel (neposredna žica)
- Svetlobna moč: 730 lumnov
- Barvna temperatura: 3000K
- Indeks barvnega upodabljanja (CRI): 90
- Energijska ocena: Energy Star
Garancija in podpora
Project Source products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please contact Project Source customer service. Keep your purchase receipt as proof of purchase.
For assistance, please refer to the contact information provided on the product packaging or the official Project Source webmesto.
