DS18 PRO-GM6 Loudspeaker Instruction Manual

1. Uvod

Thank you for choosing the DS18 PRO-GM6 6.5-inch Midrange Loudspeaker. This manual provides essential information for the proper installation, operation, and maintenance of your speaker. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

2. Varnostne informacije

Always observe the following safety precautions when installing and operating your loudspeaker:

• Preden začnete z električnimi deli, odklopite negativni pol akumulatorja vozila, da preprečite kratek stik.
• Ensure proper wiring and connections. Incorrect wiring can damage the speaker, amplifier, or vehicle's electrical system.
• Use appropriate gauge wiring for power and speaker connections.
• Mount the speaker securely to prevent movement during vehicle operation.
• Izogibajte se nameščanju zvočnikov na mesta, ki ovirajo varnostne funkcije vozila (npr. zračne blazine).
• Avdio sistema ne uporabljajte pri pretirano visoki glasnosti dlje časa, saj lahko to poškoduje sluh.
• Če ste glede katerega koli dela postopka namestitve negotovi, se posvetujte s profesionalnim monterjem.

3. Kaj je v škatli

• DS18 PRO-GM6 Loudspeaker (1 unit)
• Navodila za uporabo

Note: Additional mounting hardware or speaker wire may be required and is not included.

4. Specifikacije

Slika: spredaj view of the DS18 PRO-GM6 loudspeaker with its main technical specifications highlighted.

5. Nastavitev in namestitev

Proper installation is crucial for the performance and longevity of your DS18 PRO-GM6 loudspeaker. This section provides general guidelines. Specific vehicle requirements may vary.

5.1 Načrtovanje namestitve

• Lokacija: Identify suitable mounting locations in your vehicle, typically door panels or custom enclosures. Ensure sufficient mounting depth (2.72 inches / 69mm) and clearance.
• Ožičenje: Plan the routing of speaker wires from your amplifier to the speaker locations. Avoid running speaker wires alongside power cables to prevent noise interference.
• AmpUjemanje lifierja: The PRO-GM6 has an 8 Ohm impedance and handles 140W RMS. Ensure your amplifier can safely deliver power within these specifications. Connecting an 8 Ohm speaker to a 4 Ohm amplifier output will result in lower power delivery than the amplifier's rated 4 Ohm output.

5.2 Namestitev zvočnika

Slika: Stranski profesionalecfile of the DS18 PRO-GM6 loudspeaker, illustrating its depth and mounting flange.

1. Pripravite montažno površino: If installing in a new location, carefully cut a circular opening with a diameter of 5.70 inches (145mm). Ensure the surface is sturdy and free of obstructions.
2. Position Speaker: Place the speaker into the opening, aligning the mounting holes with the pre-drilled holes or marking new ones.
3. Varni zvočnik: Use appropriate screws (not included) to firmly secure the speaker to the mounting surface. Do not overtighten.

5.3 Žične povezave

Slika: Zadaj view of the DS18 PRO-GM6 loudspeaker, showing the positive and negative speaker terminals.

1. Prepoznajte terminale: The speaker has clearly marked positive (+) and negative (-) terminals.
2. Povežite žice: Connect the positive (+) output from your amplifier to the positive (+) terminal on the speaker. Connect the negative (-) output from your amplifier to the negative (-) terminal on the speaker. Maintain correct polarity for all speakers in your system.
3. Varne povezave: Ensure all connections are tight and free from short circuits.

6. Navodila za uporabo

The DS18 PRO-GM6 is a midrange loudspeaker designed to reproduce frequencies between 98 Hz and 10 KHz. It should be used as part of a complete car audio system, typically paired with subwoofers for low frequencies and tweeters for high frequencies.

• Sistemska integracija: Connect the PRO-GM6 to an appropriate amplifier kanal.
• Nastavitve križanja: For optimal sound quality and speaker protection, use an electronic crossover to filter out frequencies below 98 Hz (high-pass filter) and above 10 KHz (low-pass filter). Refer to your amplifier or head unit's manual for crossover adjustments.
• Prilagoditev ojačanja: Nastavite amppravilno nastavite ojačanje lifierja, da se ujema z izhodno glasnostjotage of your head unit. Avoid setting the gain too high, as this can lead to distortion and speaker damage.
• Obdobje vteka: Allow a break-in period of approximately 10-20 hours of normal listening before operating the speakers at high volumes. This allows the speaker's suspension components to loosen and perform optimally.

7. Vzdrževanje

The DS18 PRO-GM6 loudspeaker requires minimal maintenance:

• Čiščenje: Use a soft, dry cloth to wipe the speaker cone and frame. Avoid using harsh chemicals or excessive moisture.
• Pregled: Občasno preverjajte tesnost priključkov zvočnikov in se prepričajte, da nobena žica ni obrabljena ali izpostavljena.
• Varstvo okolja: While the speaker features a steel basket, it is not waterproof. Protect it from direct exposure to water and extreme temperatures.

8. Odpravljanje težav

9. Garancija in podpora

DS18 products are covered by a limited warranty. For specific warranty terms, conditions, and duration, please refer to the warranty card included with your product or visit the official DS18 website. For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact DS18 customer support directly.

Več informacij in kontaktnih podatkov najdete na DS18 Official Store on Amazon.