Eheim držala za kompaktno črpalko ON 1000 (1022) - Navodila za uporabo

1. Uvod

This manual provides detailed instructions for the installation and maintenance of the Eheim Holders, model 7248648. These holders are specifically designed for use with the Eheim Compact ON Pump 1000 (model 1022) to ensure stable and secure placement within your aquarium system. Proper installation of these holders contributes to optimal pump operation and longevity.

2. Izdelek je končanview

The Eheim Holders (model 7248648) are supplied as a set of two durable rubber components. They are essential for mounting the Eheim Compact ON Pump 1000 (1022) securely, preventing movement and reducing vibration during operation.

Slika 1: Packaging of the Eheim 7248648 Holders. The package displays the Eheim brand, model number 7248648, and barcodes.

Slika 2: Bližnji posnetek view of the two individual Eheim 7248648 rubber holders. These small, black, cylindrical components are designed to fit onto the pump shaft.

3. Nastavitev in namestitev

Follow these steps to correctly install the Eheim Holders (7248648) onto your Eheim Compact ON Pump 1000 (1022).

1. Priprava črpalke: Ensure your Eheim Compact ON Pump 1000 (1022) is clean and disconnected from any power source.
2. Poiščite pritrdilne točke: Identify the two ends of the pump's impeller shaft where the holders are to be placed. Refer to Figure 3 for visual guidance.
3. Install Holders: Gently slide one Eheim holder onto each end of the impeller shaft. The holders should fit snugly, providing cushioning and stability. Do not force them, as this may damage the pump or the holders.
4. Preverite umestitev: Once installed, ensure both holders are securely seated and provide a stable base for the pump.

Slika 3: A close-up image showing one Eheim 7248648 holder correctly installed on the end of a pump's impeller shaft, indicated by a white dot.

Slika 4: An exploded diagram illustrating the assembly of an Eheim pump, highlighting the placement of the 7248648 holders (labeled 'ラバー' and '7248648') at both ends of the impeller assembly. This diagram shows how the holders integrate into the pump's structure for stability.

4. Navodila za uporabo

The Eheim Holders (7248648) are passive components designed to provide stability for your Eheim Compact ON Pump 1000 (1022). Once installed, they require no further operational input. Their function is to absorb vibrations and maintain the pump's position, ensuring quiet and efficient operation within the aquarium.

5. Vzdrževanje

To ensure continued optimal performance and longevity of your Eheim Holders:

• Redni pregled: Periodically inspect the holders for signs of wear, cracking, or degradation, especially during routine pump cleaning.
• Čiščenje: If necessary, gently clean the holders with a soft brush and aquarium-safe water to remove any algae or debris buildup.
• Zamenjava: If the holders show significant signs of wear or no longer provide a snug fit, replace them with new Eheim 7248648 holders to maintain pump stability and prevent potential damage.

6. Odpravljanje težav

As passive components, the Eheim Holders typically do not require extensive troubleshooting. However, if you experience issues related to pump stability or excessive vibration, consider the following:

• Pump Instability: If the pump is wobbling or moving excessively, check that both holders are correctly seated on the impeller shaft and are not worn out.
• Increased Noise/Vibration: Worn or improperly installed holders can contribute to increased noise or vibration from the pump. Inspect and replace if necessary.
• Missing Holder: Ensure both holders are present. The pump requires two holders for proper balance and stability.

If issues persist after checking the holders, consult the instruction manual for your Eheim Compact ON Pump 1000 (1022) or contact Eheim customer support.

7. Specifikacije

8. Garancija in podpora

For specific warranty information regarding the Eheim Holders (7248648), please refer to the documentation provided with your original Eheim Compact ON Pump 1000 (1022) or contact Eheim customer service directly. Eheim products are known for their quality and durability. For technical support or inquiries, please visit the official Eheim webspletnem mestu ali se obrnite na njihove pooblaščene servisne centre.