RCF HDL6-A 1400W 2-Way Powered Line Array Module

1. Uvod

This user manual provides essential information for the safe and effective operation of your RCF HDL6-A 1400W 2-Way Powered Line Array Module. Please read this manual thoroughly before using the product to ensure proper setup, optimal performance, and to prevent damage or injury. The RCF HDL6-A is designed for professional sound reinforcement applications, offering high power output and clear audio reproduction in a compact form factor.

2. Varnostne informacije

Vedno upoštevajte naslednje varnostne ukrepe, da preprečite električni udar, požar ali poškodbe enote.

• vir energije: Connect the unit only to a power supply of the type described in this manual and marked on the unit. Ensure the voltage je pravilno za vašo regijo.
• Ozemljitev: Always ensure the power cord is properly grounded to prevent electric shock.
• Prezračevanje: Ne blokirajte prezračevalnih odprtin. Zagotovite zadosten pretok zraka okoli enote, da preprečite pregrevanje.
• Voda in vlaga: Do not expose the unit to rain or moisture. Do not place objects filled with liquids on the unit. This product is not water resistant.
• Servisiranje: Tega izdelka ne poskušajte servisirati sami. Vsa servisna dela prepustite usposobljenemu serviserju. Odpiranje enote vas lahko izpostavi nevarnim hlapom.tagali druge nevarnosti.
• Umestitev: Ensure the unit is placed on a stable surface or properly rigged according to professional standards. Avoid placing it in direct sunlight or near heat sources.
• Zaščita sluha: Prolonged exposure to high sound pressure levels can cause permanent hearing damage. Use appropriate hearing protection when operating this equipment at high volumes.

3. Izdelek je končanview

The RCF HDL6-A is a powerful and compact 2-way powered line array module designed for versatility and high performance.

3.1 Ključne lastnosti

• 1400W Peak Power, 700W RMS
• 2-Way Design with 6-inch Woofer and 1.7-inch Tweeter
• Integrated Digital Signal Processing (DSP)
• XLR Connectivity for Audio Input and Link
• PowerCON Input and Link for daisy-chaining power
• Lightweight and durable composite cabinet
• Integrated rigging hardware for array configurations

3.2 Komponente in krmilniki

Slika 3.1: Spredaj View. This image shows the front grille of the RCF HDL6-A, featuring the RCF logo and the protective mesh covering the speaker components.

Slika 3.2: Nagnjena sprednja stran View. Perspektiva view of the HDL6-A, highlighting its compact design and integrated rigging points on the sides.

Slika 3.3: stran View. Ta slika prikazuje stranskega profesionalcafile of the HDL6-A, showing the robust cabinet construction and the integrated handles/rigging points.

Slika 3.4: Zadnja ploščaview. The rear panel features all input/output connections and control knobs. From left to right, it includes the balanced input/link, volume control, high frequency switch, and power input/link.

Figure 3.5: Power Section. Podrobno view of the power input (blue PowerCON) and power link (white PowerCON) connectors, along with voltage information and main fuse location.

Figure 3.6: Audio and Control Section. This image shows the balanced XLR input and link connectors, the volume control knob, and the High Frequency switch (Flat/Boost) with associated LED indicators for Limiter, Signal, and Power.

Figure 3.7: Rigging Hardware. A close-up of the integrated rigging system, showing the quick-release pins and multiple holes for adjusting the splay angle between array modules.

Figure 3.8: Rigging Pin Detail. This image provides a closer look at the mechanism for securing the rigging pins, essential for safe and stable line array configurations.

4. Nastavitev

Proper setup is crucial for optimal performance and safety of your HDL6-A module.

4.1 Razpakiranje in pregled

• Enoto previdno vzemite iz embalaže.
• Preverite enoto glede morebitnih poškodb, ki so nastale med prevozom. Če odkrijete poškodbe, se nemudoma obrnite na prodajalca.
• Originalno embalažo shranite za kasnejši transport ali shranjevanje.

4.2 Napajalni priključek

• The HDL6-A uses a standard PowerCON connector for its power input.
• Connect the provided power cable to the blue Power IN connector on the rear panel.
• Drugi konec napajalnega kabla priključite v ustrezno vtičnico za izmenični tok.
• For daisy-chaining power to other HDL6-A units, use the white Power LINK connector. Ensure not to exceed the maximum power consumption for the entire chain.

4.3 Avdio povezava

• Connect your audio source (e.g., mixer, audio interface) to the Balanced INPUT XLR connector on the rear panel.
• To send the audio signal to another HDL6-A unit or other audio equipment, use the Balanced LINK XLR connector.
• Ensure all audio cables are securely connected and of high quality to minimize noise.

4.4 Montaža in vrv

The HDL6-A is designed for line array configurations. Proper rigging requires professional knowledge and adherence to safety standards.

• Utilize the integrated rigging hardware for suspending the modules.
• Consult the rigging diagrams and instructions provided by RCF for specific array configurations and weight limits.
• Ensure all rigging points are secure and capable of supporting the total weight of the array.
• For ground stacking, ensure the units are stable and cannot tip over.

5. Delovanje

Once the HDL6-A is set up, follow these steps for operation.

5.1 Vklop/izklop

• Pred vklopom se prepričajte, da so vse povezave varne.
• Turn on your audio source (mixer, etc.) first, then power on the HDL6-A.
• When powering off, turn off the HDL6-A first, then your audio source.

5.2 Nadzor glasnosti

• The VOLUME knob on the rear panel adjusts the output level of the module.
• Start with the volume at a low setting and gradually increase it to the desired level.

5.3 High Frequency (HF) Switch

• The HF switch allows you to select between 'FLAT' and 'BOOST' settings for the high frequencies.
• STANOVANJE: Provides a neutral frequency response, suitable for most applications.
• BOOST: Enhances high frequencies, which can be useful for long-throw applications or to compensate for air absorption.

5.4 LED indikatorji

• LED MOČ: Zasveti, ko je enota vklopljena.
• LED SIGNAL: Zasveti, ko je prisoten zvočni signal.
• LED LIMITER: Illuminates when the internal limiter is active, indicating that the speaker is reaching its maximum output. Reduce the input level if this LED is constantly lit to prevent distortion and potential damage.

6. Vzdrževanje

Regular maintenance helps ensure the longevity and performance of your HDL6-A module.

• Čiščenje: Za čiščenje zunanjosti enote uporabite mehko, suho krpo. Ne uporabljajte abrazivnih čistil, topil ali voskov.
• Prezračevanje: Periodically check that the ventilation openings are free from dust and debris. Use a soft brush or compressed air to clear them if necessary.
• Pregled kabla: Regularly inspect all power and audio cables for signs of wear, cuts, or damage. Replace damaged cables immediately.
• Shranjevanje: When not in use for extended periods, store the unit in a dry, cool place, preferably in its original packaging or a protective case.

7. Odpravljanje težav

This section addresses common issues you might encounter. If the problem persists, contact RCF support or a qualified technician.

8. Specifikacije

Detailed technical specifications for the RCF HDL6-A 1400W 2-Way Powered Line Array Module.

9. Garancija in podpora

RCF products are manufactured to the highest quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official RCF website. For technical support, service, or spare parts, please contact your authorized RCF dealer or distributor. You can also find support resources on the RCF official webmesto.

RCF Official Webspletno mesto: www.rcf.it