1. Uvod
This instruction manual provides detailed information for the proper installation and use of your SmallRig Cold Shoe Mount Adapter (Model 2060). This adapter is designed to expand the mounting capabilities of your camera setup, allowing you to attach various accessories such as microphones, flashes, and LED lights to camera cages, handles, or plates.
2. Vsebina paketa
Prosimo, preverite, ali so v vašem paketu priloženi vsi spodaj navedeni artikli:
- 2 x SmallRig Cold Shoe Mount Adapters
- 2 x 1/4"-20 Screws
- 4 x M2.5 vijaki
- 2 x Hex Spanners
Image 2.1: Contents of the SmallRig Cold Shoe Mount Adapter package, including two cold shoe mounts, various screws, and hex spanners.
3. Nastavitev in namestitev
The SmallRig Cold Shoe Mount Adapter can be securely attached to any camera accessory featuring 1/4"-20 or M2.5 threaded holes.
3.1 Identifying Mounting Points
The cold shoe mount features both 1/4"-20 and M2.5 threaded holes on its base for attachment.
Slika 3.1: Zadaj view of the cold shoe mount adapter, highlighting the 1/4"-20 and M2.5 threaded attachment points.
3.2 Attachment Procedure
- Identify the desired mounting location on your camera cage, handle, or plate. Ensure it has either a 1/4"-20 or M2.5 threaded hole.
- Align the corresponding threaded hole on the cold shoe mount with the mounting point on your accessory.
- Insert the appropriate screw (1/4"-20 or M2.5) and tighten it using the provided hex spanner until secure.
- Opomba: For most camera cages, including those compatible with Sony ZV-E10, a6500, a6300, a6700, the 1/4"-20 screw is typically used. The M2.5 screws are generally for specific SmallRig accessories or when additional stability is required. For SmallRig Full Cage 1661, only the 1/4"-20 screw is needed.
Image 3.2: Illustration of the cold shoe mount adapter being attached to a camera cage.
4. Navodila za uporabo
Once the cold shoe mount adapter is securely installed, you can attach various accessories.
4.1 Pritrjevanje dodatkov
- Slide your accessory (e.g., microphone, flash, LED light) into the cold shoe slot.
- Ensure the accessory is fully seated. The cold shoe mount features two secure bending bevels on one end to prevent accidental removal.
- The white arrows on the surface indicate the recommended direction for sliding accessories for optimal security.
Image 4.1: Close-up of the cold shoe mount adapter, showing the anti-off bending bevels and white directional arrows for accessory mounting.
Slika 4.2: Primerample of the cold shoe mount adapter in use, supporting an external microphone on a camera rig.
4.2 Združljivost
This cold shoe mount is compatible with a wide range of camera accessories that utilize a standard cold shoe connection. Exampvključujejo:
- Mikrofoni
- LED luči
- External Flashes
- Small monitors (with appropriate cold shoe adapter)
- Magic Arms (with cold shoe base)
- Cold Shoe Handles
Image 4.3: Visual representation of the cold shoe mount adapter's compatibility with different camera accessories such as cages, LED lights, magic arms, cold shoe handles, and monitor mounts.
5. Vzdrževanje
To ensure the longevity and optimal performance of your SmallRig Cold Shoe Mount Adapter, follow these simple maintenance guidelines:
- Nosilec naj bo čist in brez prahu ter umazanije. Za čiščenje uporabljajte mehko, suho krpo.
- Avoid exposing the mount to extreme temperatures or corrosive substances.
- Periodically check the tightness of the mounting screws to ensure a secure connection.
6. Odpravljanje težav
6.1 Accessory Not Fitting Securely
- Ensure the accessory has a standard cold shoe base.
- Verify that the accessory is slid fully into the mount, past the anti-off bevels.
- Some accessories may have a locking mechanism that needs to be tightened after insertion.
6.2 Mount Not Attaching to Camera Accessory
- Confirm that your camera accessory has 1/4"-20 or M2.5 threaded holes.
- Ensure you are using the correct screw size (1/4"-20 or M2.5) for the threaded hole.
- Tighten the screw firmly with the hex spanner.
6.3 Omejitve združljivosti
This Cold Shoe Mount is NE suitable for DJI gimbals and NE for ZHIYUN gimbals.
7. Specifikacije
| Model | 2060 |
| Material | Aluminijeva zlitina |
| Dimenzije (D x Š x V) | 25 mm x 25 mm x 9 mm (0.98" x 0.98" x 0.35") |
| Teža artikla (na kos) | 0.317 unče (približno 9 g) |
| Vrsta namestitve | 1/4"-20 Thread, M2.5 Thread |
| Združljivost | Standard cold shoe accessories, camera cages with 1/4"-20 or M2.5 threads |
Image 7.1: The compact size of the SmallRig Cold Shoe Mount Adapter, shown held in a hand.
8. Garancija in podpora
Za informacije o garanciji ali tehnično podporo se obrnite na uradno spletno stran SmallRig. webspletno mesto ali se obrnite neposredno na njihovo službo za stranke. Račun shranite kot dokazilo o nakupu za morebitne garancijske zahtevke.
Uradni SmallRig Webspletno mesto: www.smallrig.com
