GATEMAN WF-20

GATEMAN WF20 Fingerprint Digital Door Lock User Manual

Model: WF-20

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your GATEMAN WF20 Fingerprint Digital Door Lock. Please read this manual thoroughly before installation and use to ensure proper function and security. Keep this manual for future reference.

Varnostni ukrepi

  • Do not attempt to disassemble or repair the lock yourself. Contact qualified service personnel.
  • Avoid exposing the lock to direct water spray or excessive humidity.
  • Uporabljajte samo predpisane alkalne baterije AA. Ne mešajte starih in novih baterij ali različnih vrst baterij.
  • Ensure the door is properly aligned and closes smoothly before installing the lock.

2. Izdelek je končanview

The GATEMAN WF20 is a keyless digital door lock featuring fingerprint recognition and a touch keypad for secure entry. It is designed for modern homes and offices, offering convenience and enhanced security.

Komponente

Familiarize yourself with the main components of your GATEMAN WF20 lock:

GATEMAN WF20 Fingerprint Digital Door Lock Front View

Figure 2.1: Front Panel of the GATEMAN WF20 Lock. This image displays the sleek black front panel of the GATEMAN WF20 digital door lock, featuring a numeric touch keypad and a fingerprint scanner located at the top. The brand name 'GATEMAN' is visible above the scanner.

GATEMAN WF20 Digital Door Lock Interior View

Figure 2.2: Interior Panel of the GATEMAN WF20 Lock. This image shows the interior side of the GATEMAN WF20 lock, highlighting the manual thumb turn for locking/unlocking from inside, an 'OPEN/CLOSE' button, and the battery cover. The 'Smart Living' logo is also visible.

  • Čitalnik prstnih odtisov: Located on the top front panel for biometric authentication.
  • Tipkovnica na dotik: Numeric pad on the front panel for PIN code entry.
  • Manual Thumb Turn: On the interior panel for manual locking and unlocking.
  • Gumb ODPRTO/ZAPRTJE: On the interior panel for quick locking/unlocking.
  • Pokrov baterije: On the interior panel, protecting the battery compartment.
  • Gumb za ponastavitev: Small button on the bottom front for system reset.

3. Nastavitev in namestitev

Proper installation is crucial for the optimal performance of your GATEMAN WF20 lock. It is recommended to have the lock installed by a qualified professional.

3.1 Namestitev baterije

  1. Remove the battery cover from the interior unit.
  2. Vstavite štiri (4) nove alkalne baterije AA in pri tem pazite na pravilno polarnost (+/-).
  3. Replace the battery cover. The lock will emit a sound indicating it is powered on.

3.2 Initial Setup and Master PIN Registration

Upon first power-up or after a factory reset, you must register a Master PIN code.

  1. Odprite pokrov baterije na notranji enoti.
  2. Press the [Registration] button (usually located near the battery compartment).
  3. On the front keypad, enter your desired 4-12 digit Master PIN code.
  4. Press the [*] button to confirm.
  5. Re-enter the Master PIN code.
  6. Press the [*] button to confirm. A confirmation sound will indicate successful registration.

Opomba: The Master PIN code is essential for managing other user PINs and fingerprints. Keep it confidential.

4. Navodila za uporabo

4.1 Odklepanje s prstnim odtisom

User scanning fingerprint on GATEMAN WF20 lock

Figure 4.1: Fingerprint Scanning. This image illustrates a user placing their finger on the fingerprint scanner of the GATEMAN WF20 lock for biometric authentication. A red line indicates the scanning area.

  1. Registriran prst položite ravno na bralnik prstnih odtisov.
  2. Hold your finger steady until the lock emits a confirmation sound and unlocks.

4.2 Odklepanje s PIN kodo

  1. Dotaknite se tipkovnice, da jo aktivirate.
  2. Enter your registered 4-12 digit PIN code.
  3. Press the [*] button. The lock will emit a confirmation sound and unlock.

4.3 Zaklepanje vrat

  • Samodejno zaklepanje: The lock is set to automatically lock after a few seconds when the door is closed.
  • Manual Locking (from outside): Touch the keypad or press the '#' button.
  • Manual Locking (from inside): Press the 'OPEN/CLOSE' button or turn the manual thumb turn.

4.4 Registering User Fingerprints

  1. Odprite pokrov baterije in pritisnite gumb [Registracija].
  2. Enter the Master PIN code followed by the [*] button.
  3. Follow the voice prompts or indicator lights to register the fingerprint. Typically, you will be asked to scan the finger multiple times.
  4. Press the [Registration] button again to exit registration mode.

4.5 Registering User PIN Codes

  1. Odprite pokrov baterije in pritisnite gumb [Registracija].
  2. Enter the Master PIN code followed by the [*] button.
  3. Enter the desired 4-12 digit user PIN code.
  4. Press the [*] button to confirm.
  5. Re-enter the user PIN code.
  6. Press the [*] button to confirm. A confirmation sound will indicate successful registration.
  7. Press the [Registration] button again to exit registration mode.

5. Vzdrževanje

5.1 Zamenjava baterije

The lock will provide a low battery warning (audible alarm or indicator light) when batteries are running low. Replace all four AA batteries promptly.

  1. Odstranite pokrov baterije na notranji enoti.
  2. Odstranite vse stare baterije.
  3. Insert four (4) new AA alkaline batteries, observing correct polarity.
  4. Zamenjajte pokrov baterije.

Opomba: Your registered PIN codes and fingerprints will be retained during battery replacement.

5.2 Čiščenje

  • Površino ključavnice obrišite z mehko, suho krpo.
  • Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and electronic components.
  • Keep the fingerprint scanner and keypad clean and free of dust or debris for optimal performance.

6. Odpravljanje težav

TežavaMožen vzrokrešitev
Zaklepanje se ne odziva.Prazne baterije.Zamenjajte vse štiri AA baterije.
Prstni odtis ni prepoznan.Finger not placed correctly; scanner dirty; unregistered fingerprint.Ensure finger is clean and placed flat. Clean scanner. Register fingerprint if not already done.
PIN koda ne deluje.Incorrect PIN entered; keypad not activated.Ensure keypad is active before entering PIN. Verify PIN code.
Zaklepanje neprekinjeno piska.Low battery warning; door not fully closed.Replace batteries. Check door alignment and ensure it closes completely.
Lock is difficult to operate.Mechanical obstruction; improper installation.Check for any obstructions around the door or lock. Re-evaluate installation or contact support.

7. Specifikacije

  • Model: WF-20
  • Znamka: GATEMAN
  • Vrsta ključavnice: Biometric, Digital
  • vir energije: Battery powered (4 AA batteries required)
  • Material: Other (durable composite/metal)
  • slog: Moderno
  • barva: Črna
  • Nadzorna metoda: Dotik, ročno upravljanje
  • Posebne lastnosti: Vstop brez ključa
  • Teža artikla: 907 g
  • Dimenzije paketa: 30.48 x 20.32 x 5.08 cm

8. Garancija in podpora

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official GATEMAN webspletno mesto. Shranite račun kot dokazilo o nakupu.

For further assistance, you may contact the retailer where the product was purchased.

Povezani dokumenti - WF-20

Prejview Gateman RINO Series Smart Door Lock Owner's Manual and Features
Comprehensive owner's manual for the Gateman RINO Series smart door lock by Gateman (ASSA ABLOY). Covers installation, usage, features like PIN/card access, alarms, emergency power, and troubleshooting.
Prejview Gateman Tubular Leverset Installation Guide
Comprehensive installation guide for Gateman tubular leversets, detailing door preparation, drilling specifications, strike plate fitting, and assembly steps. Includes diagrams and measurements for various door thicknesses and hole placements.
Prejview Navodila za namestitev ZOMOSS DZS01
Obsežen priročnik za namestitev elektronske ključavnice s tipkovnico ZOMOSS DZS01, ki zajema nastavitev, programiranje in odpravljanje težav.
Prejview IU-20 IU-30 Programming Guide for IU-LOCK Smart Door Locks
Detailed programming instructions for IU-20 and IU-30 IU-LOCK smart door locks, covering passcode management, passage modes, beeper settings, and auto-lock timer configuration.
Prejview Bothstar JU-20 Smart Door Knob Installation and User Guide
Comprehensive guide for installing and using the Bothstar JU-20 Smart Door Knob, featuring keyless entry with passcodes, key access, and various programming options for enhanced home security.