Weiser SmartCode 10 Keyless Entry Deadbolt Lock User Manual

Uvod

This manual provides comprehensive instructions for the installation, operation, programming, and maintenance of your Weiser SmartCode 10 Keyless Entry Deadbolt Lock. Please read this manual thoroughly before installation and use to ensure proper function and security.

Slika 1: Zunanjost view of the Weiser SmartCode 10 Keyless Entry Deadbolt Lock in Polished Brass finish, showing the keypad and keyhole.

Vsebina paketa

Pred začetkom namestitve preverite, ali so prisotne vse komponente:

• Sklop zunanje tipkovnice
• Interior Assembly Unit
• Zapah
• Udarna plošča
• Montažna plošča
• Adapter obroč
• 2 ključev
• Vijaki
• Orodje SmartKey
• 4 AA baterije
• Navodila za namestitev (ta priročnik)

Nastavitev in namestitev

Pred namestitvijo se prepričajte, da vaša vrata izpolnjujejo naslednje specifikacije:

• Door thickness: 1-3/8" to 2" (35mm - 51mm)
• Cross bore hole diameter: 2-1/8" (54mm)
• Razmik med hrbtoma: 60 mm ali 70 mm

Potrebna orodja:

• Phillips izvijač za glavo
• Merilni trak
• Svinčnik

Koraki namestitve:

1. Pripravite vrata: If replacing an existing lock, remove it. Ensure the door frame is properly prepared for the strike plate.
2. Namestite zapah: Insert the latch into the door edge. Ensure the "UP" arrow on the latch is facing upwards. Secure with screws.
3. Namestite zunanji sklop: Route the cable from the exterior keypad assembly through the cross bore hole. Position the exterior assembly flush against the door.
4. Namestite montažno ploščo: Secure the mounting plate to the door using the provided screws, ensuring the cable passes through the plate.
5. Povežite kable: Priključite kabel od zunanjega sklopa do notranjega sklopa.
6. Montaža notranjega sklopa: Attach the interior assembly to the mounting plate. Ensure the turn piece shaft engages correctly with the latch mechanism. Secure with screws.
7. Namestite baterije: Insert the 4 AA batteries into the battery pack of the interior assembly.
8. Izvedite postopek odpiranja vrat: This step is crucial for the lock to learn the orientation of your door.
   • With the door open and unlocked, press the "Lock" button on the keypad.
   • The latch bolt should extend and retract. If it does not, repeat the process.

Slika 2: The Weiser SmartCode 10 deadbolt lock installed on a dark wooden door, showcasing its integration with existing door hardware.

Navodila za uporabo

Programiranje uporabniških kod:

The lock supports up to 16 user codes and one master code. The master code is used to add or delete user codes and should be kept confidential.

1. Set Master Code (First Time Only):
   • Odprite pokrov baterije na notranjem sklopu.
   • Press the "Program" button once.
   • Enter a new 4-8 digit master code on the keypad.
   • Press the "Lock" button.
   • Re-enter the master code.
   • Press the "Lock" button. A successful programming will be indicated by a green flash and a beep.
2. Dodaj uporabniško kodo:
   • Odprite pokrov baterije.
   • Press the "Program" button once.
   • Vnesite glavno kodo.
   • Press the "Lock" button.
   • Enter a new 4-8 digit user code.
   • Press the "Lock" button. A successful programming will be indicated by a green flash and a beep.
3. Izbriši uporabniško kodo:
   • Odprite pokrov baterije.
   • Press the "Program" button twice.
   • Vnesite glavno kodo.
   • Press the "Lock" button.
   • Vnesite uporabniško kodo, ki jo želite izbrisati.
   • Press the "Lock" button. A successful deletion will be indicated by a green flash and a beep.

Zaklepanje vrat:

• Od zunanjosti: Press the "Lock" button on the keypad. The deadbolt will extend.
• Iz notranjosti: Rotate the turn piece to the vertical position.

Odklepanje vrat:

• Using Keypad: Enter a valid user code or master code. The deadbolt will retract.
• Using Key: Insert the key into the keyhole and turn.
• Iz notranjosti: Rotate the turn piece to the horizontal position.

Slika 3: Notranjost view of the Weiser SmartCode 10 deadbolt lock, showing the battery compartment and turn piece.

SmartKey Re-keying Instructions

The SmartKey feature allows you to re-key your lock to a new key in seconds. This is useful if you want to match your lock to an existing key or if you lose a key.

1. Delujoči ključ popolnoma vstavite v valj.
2. Ključ zavrtite za 90 stopinj v smeri urinega kazalca.
3. Insert the SmartKey tool firmly into the SmartKey hole.
4. Remove the SmartKey tool.
5. Odstranite delujoči ključ.
6. Novi ključ popolnoma vstavite v valj.
7. Novi ključ zavrtite za 90 stopinj v nasprotni smeri urinega kazalca.
8. Rotate the new key 90 degrees clockwise again to ensure it functions correctly.

Slika 4: Diagram illustrating the SmartKey Security features, including resistance to kick-ins, bumps, picks, drills, and saws.

Vzdrževanje

• Zamenjava baterije: When the batteries are low, the lock will emit a series of beeps and the keypad will flash red after locking/unlocking. Replace all four AA batteries promptly.
• Čiščenje: Clean the keypad and exterior finish with a soft, damp krpo. Izogibajte se abrazivnim čistilom ali topilom, ki lahko poškodujejo premaz.
• Mazanje: Periodically lubricate the latch bolt and deadbolt mechanism with a silicone-based lubricant to ensure smooth operation. Do not lubricate the key cylinder.

Odpravljanje težav

Specifikacije

• Model: 9GED17000-001
• Končaj: Polirana medenina
• Material: Medenina
• Debelina vrat: 1-3/8" to 2" (35mm - 51mm)
• Prečna izvrtina: 2-1/8" (54 mm)
• Nazaj: Adjustable 2-3/8" or 2-3/4" (60mm or 70mm)
• Uporabniške kode: Do 16 (4–8 števk)
• vir energije: 4 alkalne baterije AA (priložene)
• Posebne lastnosti: Keyless Entry, Backlit Keypad, One-Touch Locking, SmartKey Re-key Technology, Auto-Lock
• Dimenzije izdelka: 9.4 x 13.72 x 25.4 cm
• Teža artikla: 1.69 kg

Garancija in podpora

This Weiser SmartCode 10 Keyless Entry Deadbolt Lock comes with a Limited Lifetime Warranty. For detailed warranty information or technical support, please refer to the official Weiser webspletno mesto ali se obrnite na službo za stranke.

Proizvajalec: Weiser

Webspletno mesto: www.weiserlock.com (Npramppovezava, dejanska povezava se lahko razlikuje)

Storitev za stranke: Refer to the Weiser webspletno mesto za kontaktne podatke, specifične za vašo regijo.