Navodila za uporabo aluminijastega stojala Vanguard VEO 2 265AB s kroglično glavo VEO 2 BH-50

Uvod

The Vanguard VEO 2 265AB Aluminum Tripod with VEO 2 BH-50 Ball Head is designed for photographers seeking a versatile and stable support system. This manual provides essential information for setting up, operating, and maintaining your tripod to ensure optimal performance and longevity. Its intuitive design allows for quick setup and flexible positioning, making it suitable for various photographic scenarios.

Figure 1: Vanguard VEO 2 265AB Tripod with BH-50 Ball Head in upright position.

Kaj je v škatli

• Vanguard VEO 2 265AB Aluminum Tripod with VEO 2 BH-50 Ball Head
• Torba za stojalo

Figure 2: Included carrying bag for the Vanguard VEO 2 265AB Tripod, designed for portability.

Ključne značilnosti

• Intuitive Central Column System: Allows for rapid setup of the central column and tripod legs in under 15 seconds.
• Multi-action Ball Head (BH-50): Equipped with 3 independent knobs for precise lock, panning, and friction control. Supports up to 17.6 pounds.
• Arca-Compatible QR Plate: Facilitates quick camera attachment and release.
• Advanced Twist Lock System: Enables fast and secure position setting for the 5-section aluminum legs, extendable with one hand.
• Highly Engineered Leg Tubes: Designed for smooth and precise leg extensions.
• Dedicated Suspension Loop: Located on the canopy to accommodate counterbalance weights or bags for enhanced stability.
• Non-Slip, All-Weather TPU Grips: Featured on one leg for improved handling and grip.

Nastavitev

1. Extending the Legs

To extend the tripod legs, rotate the advanced twist locks counter-clockwise to loosen each section. Extend the leg sections to your desired height, then rotate the twist locks clockwise to secure them firmly in place. The 5-section design allows for quick and efficient adjustment.

Figure 3: Advanced twist lock system for leg extension.

2. Adjusting the Central Column

The tripod features an exclusive central column system for rapid deployment. Loosen the central column lock, raise or lower the column to the desired height, and then tighten the lock securely. This system allows for quick height adjustments.

3. Pritrditev kamere

The VEO 2 BH-50 Ball Head comes with an Arca-compatible quick release (QR) plate. Attach this plate to the base of your camera by screwing the 1/4" D-ring screw into the camera's tripod socket. Once the plate is securely attached to your camera, slide the camera with the QR plate into the ball head's receiver and engage the locking mechanism until it clicks into place.

Figure 4: VEO 2 BH-50 Ball Head with quick release plate.

Predstavitveni videoposnetek nastavitve

Video 1: Official video demonstrating the setup and key features of a Vanguard VEO 2 series tripod, including leg extension and head adjustments.

Operating Your Tripod

1. Prilagajanje kotov nog

The VEO 2 265AB offers three leg angles (20°, 45°, and 80°) to ensure stability on uneven terrain and enable creative shooting perspectives. To adjust, press the leg angle lock release button at the top of each leg and set it to the desired angle. Ensure all legs are securely locked before use.

Figure 5: Tripod legs adjusted for low-angle photography.

2. Ball Head Control

The VEO 2 BH-50 Ball Head provides precise control over your camera's position:

• Zaklepni gumb: Loosen to adjust the ball head's position, tighten to secure the camera.
• Panning Knob: Allows for 360° rotation of the camera for panoramic shots. Loosen to pan, tighten to lock.
• Gumb za nadzor trenja: Adjusts the tension of the ball movement, providing smoother or stiffer control based on camera weight and preference.

Operating Features Demonstration Video

Video 2: Konecview of the Vanguard Alta Pro 2+ series, highlighting innovative features such as multi-angle center column and quick-turn twist locks, applicable to general Vanguard tripod operation.

Vzdrževanje

To ensure the longevity and optimal performance of your Vanguard VEO 2 265AB Tripod, follow these maintenance guidelines:

• Čiščenje: After use, especially in dusty, sandy, or wet conditions, wipe down the tripod legs and ball head with a soft, damp krpo. Izogibajte se močnim kemikalijam.
• Sušenje: If the tripod gets wet, extend all leg sections and allow them to air dry completely before collapsing and storing to prevent corrosion.
• Mazanje: Periodically check the twist locks and ball head for smooth operation. If necessary, apply a small amount of silicone-based lubricant to moving parts, avoiding excessive application.
• Shranjevanje: Store the tripod in its included carrying bag in a dry, cool place away from direct sunlight and extreme temperatures.

Odpravljanje težav

• Nestabilnost stativa: Ensure all leg sections are fully extended and twist locks are securely tightened. On uneven surfaces, adjust leg angles to maximize contact with the ground. For additional stability, utilize the dedicated suspension loop on the canopy to hang a counterbalance weight or your camera bag.
• Leg Locks Not Securing: If a twist lock feels loose or doesn't secure a leg section, inspect it for any debris (sand, dirt) that might be preventing proper engagement. Clean the mechanism thoroughly and re-test. Avoid over-tightening, which can damage the locks.
• Stiff Ball Head Movement: If the ball head feels stiff, ensure the lock and friction control knobs are adequately loosened. If the issue persists, a small amount of silicone lubricant may be applied to the ball mechanism.

Specifikacije

Garancija in podpora

The Vanguard VEO 2 265AB Tripod is manufactured by Vanguard. For detailed warranty information, product registration, or technical support, please visit the official Vanguard webspletno mesto ali se obrnite na njihovo službo za stranke. Račun shranite kot dokazilo o nakupu za morebitne garancijske zahtevke.

Za dodatne vire in informacije o izdelkih lahko obiščete VANGUARD Store on Amazon.