Valore 7 Retrofit Easy Install Shower Panel

1. Izdelek je končanview

The Valore 7 shower panel is designed for retrofit installation into existing shower systems that include a cold and hot faucet. It connects to an existing shower head spout. The panel body is constructed from durable 304 stainless steel, offering a modern aesthetic for bathroom upgrades.

This shower panel features a 3-way shower spray mode system, allowing for versatile water delivery options. It includes a brass shower wand with a brass shower cradle for handheld use.

Image 1.1: Valore 7 Shower Panel installed in a modern bathroom setting.

2. Varnostne informacije

• Pred začetkom namestitve se prepričajte, da so vse dovodne cevi za vodo izklopljene.
• Med namestitvijo nosite ustrezno osebno zaščitno opremo, kot so zaščitna očala in rokavice.
• Če ste glede katerega koli dela postopka namestitve negotovi, se posvetujte z usposobljenim vodovodarjem.
• Do not use abrasive cleaners or harsh chemicals on the shower panel's surface, as this may damage the finish.

3. Vsebina paketa

Pred začetkom namestitve preverite, ali so prisotne vse komponente:

• Tuš panelna enota
• Tuš glava
• Shower Wand (Handheld Shower)
• Shower Cradle for Handheld Shower
• Montažna oprema
• Flexible Hoses for Water Connection
• Priročnik za namestitev

4. Specifikacije

5. Mere

Refer to the diagram below for detailed product dimensions.

Image 5.1: Valore 7 Shower Panel Dimensions Diagram. All measurements are approximate.

6. Navodila za namestitev

The Valore 7 shower panel is designed for easy retrofit installation. It connects to your existing shower head spout and hot/cold water lines.

6.1 Predhodna namestitev

1. Izklopite dovod vode: Locate and turn off the main water supply to your bathroom or entire home.
2. Remove Existing Fixtures: Carefully remove your current shower head and any other fixtures that will be replaced by the shower panel.
3. Inspect Plumbing: Ensure your existing hot and cold water lines are accessible and in good condition. This panel is designed for systems with existing hot and cold faucets.
4. Water-Saving Regulator: If your water pressure is naturally low, consider not installing any water-saving regulator that may be included with the panel, as it can further reduce flow. If you use the hang-on to the shower pipe method, access to the regulator may be limited after installation.

6.2 Montaža plošče

5. Pozicioniranje: Hold the shower panel against the wall in the desired position. Mark the locations for mounting brackets. Ensure the panel is level.
6. Vrtanje lukenj: Na označenih mestih izvrtajte pilotne luknje. Po potrebi vstavite stenska sidra.
7. Varni nosilci: Pritrdite nosilce na steno s priloženimi vijaki.
8. Pritrditev plošče: The unit may include double-sided tape for securing it to the wall. Once applied, repositioning is difficult without replacing the tape. Carefully align and press the panel onto the brackets and tape.

6.3 Priključitev vodovodnih cevi

9. Povežite cevi: Attach the flexible hot and cold water supply hoses from the shower panel to your existing hot and cold water outlets. Ensure all connections are tight to prevent leaks.
10. Ročni tuš: Connect the handheld shower hose to its designated outlet on the panel.
11. Vklopite vodo: Slowly turn the main water supply back on and check for any leaks. Tighten connections as needed.
12. Seal Edges (Optional but Recommended): Apply a bead of clear silicone caulk along the sides of the shower panel where it meets the tile to create a seal and prevent water intrusion.

Note: This shower panel does not include a temperature/volume control valve. Your existing shower valve will control water temperature and flow.

7. Navodila za uporabo

The Valore 7 shower panel features a 3-way diverter to control water flow to different functions.

7.1 Nadzor pretoka vode

Use your existing shower's hot and cold water handles to adjust the desired water temperature and overall flow rate.

7.2 Selecting Spray Modes

The panel has a control knob or lever to switch between the three spray modes:

• Deževna prha: Provides a wide, gentle rainfall-like spray from the overhead shower head.


Image 7.1: Valore 7 Shower Panel demonstrating the rain shower function.

• Šobe za telo: Delivers targeted streams of water from the integrated body massage jets.

Image 7.2: Valore 7 Shower Panel demonstrating the body jet function.
• Ročni tuš: Directs water flow to the brass shower wand for focused rinsing or cleaning.

Rotate or move the diverter control to select your desired spray function. Only one function can be active at a time.

8. Vzdrževanje

8.1 Čiščenje

• Clean the stainless steel surface regularly with a soft cloth and mild soap or a non-abrasive stainless steel cleaner.
• Avoid using abrasive sponges, scouring pads, or harsh chemical cleaners, as these can scratch or damage the finish.
• Za madeže trde vode uporabite raztopino belega kisa in vode, nato pa temeljito sperite.
• Periodically clean the nozzles of the shower head and body jets to remove mineral buildup. You can often do this by gently rubbing the rubber nozzles.

8.2 Splošna nega

• Ensure all connections remain tight to prevent leaks.
• If any part becomes loose, gently tighten it. Do not overtighten.

9. Odpravljanje težav

10. Garancija in podpora

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Valore customer service. Keep your proof of purchase for warranty claims.