Hikvision DS-7732NI-I4/16P-12TB NVR User Manual

1. Uvod

This manual provides essential instructions for the installation, operation, and maintenance of your Hikvision DS-7732NI-I4/16P-12TB Network Video Recorder (NVR). This NVR is a 32-channel device supporting H.264 and H.265 video compression, resolutions up to 12MP, and features an integrated 16-port Power over Ethernet (PoE) switch. It includes 4 SATA interfaces for storage, with 12TB of pre-installed capacity, and HDMI output for local display.

Please read this manual thoroughly before operating the device and retain it for future reference. Ensure all safety precautions are observed during installation and operation.

Varnostni ukrepi

• Uporabljajte samo napajalnik, ki je predpisan za to napravo.
• Poskrbite za ustrezno prezračevanje, da preprečite pregrevanje.
• Naprave ne izpostavljajte tekočinam ali ekstremnim temperaturam.
• Naprave ne poskušajte razstavljati ali spreminjati. Vsa servisna dela prepustite usposobljenemu osebju.

2. Nastavitev

2.1 Razpakiranje in pregled

Carefully unpack the NVR and check the contents against the packing list. Inspect the device for any signs of damage during transit. If any items are missing or damaged, contact your supplier immediately.

2.2 Fizična namestitev

The DS-7732NI-I4/16P-12TB NVR is designed for rack-mounting or desktop placement. Ensure the installation location is stable, well-ventilated, and free from excessive dust or moisture.

Priključna moč

• Connect the provided power cable to the NVR's power input and then to a grounded power outlet.

Povezovanje omrežja

• Priključite ethernetni kabel iz LAN vhoda NVR-ja na omrežni usmerjevalnik ali stikalo.

Povezovanje zaslona

• Connect an HDMI cable from the NVR's HDMI output port to a monitor or TV.

Connecting Cameras (PoE)

• Connect IP cameras directly to the NVR's 16 PoE ports using Ethernet cables. The NVR will provide power and data connectivity.

Figure 1: Rear panel connections of the Hikvision DS-7732NI-I4/16P-12TB NVR, illustrating the power input, LAN port, HDMI output, and the 16 PoE ports for camera connections.

Hard Drive Installation (if applicable)

The NVR comes with 12TB pre-installed. If additional drives are needed or replacement is required, follow these steps:

1. Izklopite NVR in odklopite vse kable.
2. Remove the NVR cover screws and slide off the cover.
3. Mount the hard drive(s) into the drive bays using the provided screws.
4. Connect the SATA data and power cables to the hard drive(s) and the NVR motherboard.
5. Replace the cover and secure the screws.

2.3 Začetna konfiguracija

Powering On and First-Time Wizard

• After connecting all necessary cables, power on the NVR.
• The NVR will boot up and display a first-time setup wizard on the connected monitor.
• Follow the on-screen prompts to set up a strong administrator password, configure network settings (DHCP or static IP), and set the date and time.

Dodajanje IP kamer

• The NVR will typically auto-detect Hikvision cameras connected to its PoE ports.
• For manual addition or third-party cameras, navigate to Configuration > IP Camera > Add.
• Enter the camera's IP address, protocol, port, username, and password.

3. Delovanje

3.1 Navigacija po uporabniškem vmesniku

The NVR can be accessed via a local monitor, web browser, or client software (e.g., iVMS-4200). The local interface is navigated using a mouse.

Glavni meni Konecview

• V živo View: Displays real-time camera feeds.
• Predvajanje: Accesses recorded footage.
• Konfiguracija: System settings, camera management, recording schedules.
• dogodek: Alarm and event management.
• Zaustavitev: Safely powers off or restarts the NVR.

3.2 V živo View

Iz Live View screen, you can monitor all connected cameras. Double-click a camera feed to view it in full screen. Use the layout options to display multiple cameras simultaneously (e.g., 4, 9, 16, 32 channels).

Figure 2: The Live View interface of the NVR, displaying multiple camera streams in a grid layout, with options for channel selection and layout customization.

3.3 Snemanje

To configure recording settings, navigate to Konfiguracija > Snemanje > Urnik.

• Nenehno snemanje: Nenehno snema.
• Snemanje zaznavanja gibanja: Snema samo, ko je zaznano gibanje.
• Snemanje alarma: Zabeleži, kdaj se sproži alarmni dogodek.
• Ročno snemanje: Click the record icon in Live View to start/stop recording manually.

3.4 Predvajanje

Za dostop do posnetega footage, pojdi na Predvajanje iz glavnega menija.

• Select the desired camera(s) and date.
• Use the timeline to navigate through recorded events. Different colors on the timeline indicate different recording types (e.g., continuous, motion).
• Za ponovno predvajanje uporabite gumbe za predvajanje (predvajanje, premor, hitro previjanje naprej, previjanje nazaj)view footage.
• Za izvoz footage, select the desired segment and click the Posnetek or Izvozi gumb.

3.5 Upravljanje alarmov

Configure alarm events and responses via Konfiguracija > Dogodek.

• Zaznavanje gibanja: Define detection areas and sensitivity for each camera.
• Video T.ampering: Detects if a camera's view is obstructed or altered.
• Line Crossing/Intrusion Detection: Set up virtual lines or areas to trigger alarms.
• Dejanja alarma: Configure actions such as recording, sending email notifications, triggering alarm outputs, or sounding a buzzer.

3.6 Sistemske nastavitve

Access various system settings via Configuration > System.

• Splošno: Date and time, language.
• Upravljanje uporabnikov: Create, modify, or delete user accounts and assign permissions.
• Shranjevanje: View HDD status, format drives, configure overwrite settings.
• Omrežje: Adjust IP address, DNS, port settings.

4. Vzdrževanje

4.1 Posodobitve vdelane programske opreme

Regularly check for firmware updates on the official Hikvision website. Firmware updates can provide new features, performance improvements, and security enhancements.

• Prenesite pravilno vdelano programsko opremo file for your NVR model.
• Transfer the firmware to a USB drive.
• Pojdite na Configuration > System > Maintenance > Upgrade in sledite navodilom na zaslonu.
• Do not power off the NVR during the upgrade process.

4.2 Upravljanje trdega diska

Monitor the health of your hard drives via Konfiguracija > Shranjevanje > Trdi disk. If a drive shows errors or fails, replace it promptly. You can also format drives from this menu.

4.3 System Backup and Restore

It is recommended to regularly back up your NVR's configuration settings. This can be done via Configuration > System > Maintenance > Import/Export. You can export the configuration to a USB drive and restore it if needed.

4.4 Čiščenje

Periodically clean the NVR's exterior with a soft, dry cloth. Ensure ventilation openings are free from dust to maintain proper airflow and prevent overheating.

5. Odpravljanje težav

This section addresses common issues you might encounter. For more complex problems, refer to the Hikvision support webspletno mesto ali se obrnite na tehnično podporo.

6. Specifikacije

The following table outlines the key technical specifications for the Hikvision DS-7732NI-I4/16P-12TB NVR.

7. Garancija in podpora

7.1 Informacije o garanciji

For specific warranty terms and conditions applicable to your Hikvision DS-7732NI-I4/16P-12TB NVR, please refer to the warranty card included with your product or the official Hikvision webGarancijsko kritje običajno vključuje napake v materialu in izdelavi pri normalni uporabi.

7.2 Tehnična podpora

Should you require technical assistance, please visit the official Hikvision support website. You can find comprehensive FAQs, troubleshooting guides, software downloads, and contact information for technical support. When contacting support, please have your NVR model number (DS-7732NI-I4/16P-12TB) and serial number readily available.

Official Hikvision Support: https://www.hikvision.com/us/support/