Uporabniški priročnik za programator zalivanja AQUA CONTROL C4200

Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your AQUA CONTROL C4200 Watering Programmer. Designed for ease of use, this device automates your garden watering, ensuring efficient irrigation. Please read this manual thoroughly before first use to ensure proper function and longevity of the product.

Varnostne informacije

• Ensure the device is securely attached to a standard 3/4" tap connection to prevent leaks.
• Do not expose the programmer to extreme temperatures or direct sunlight for prolonged periods, as this may affect performance and durability.
• Use only the specified battery type (2 AAA batteries). Ensure correct polarity when inserting batteries.
• Remove batteries if the device will not be used for an extended period, especially during winter months, to prevent corrosion.
• Hraniti izven dosega otrok.
• Do not disassemble or attempt to repair the unit yourself. Contact customer support for assistance.

Vsebina paketa

Preverite, ali so v paketu prisotni vsi elementi:

• AQUA CONTROL C4200 Watering Programmer Unit
• Uporabniški priročnik (ta dokument)
• 2 x AAA baterije (predhodno nameščene ali priložene posebej)

Konec izdelkaview

The AQUA CONTROL C4200 is a compact and efficient watering programmer. Its main components include:

• Vhodni priključek: Top connection for attaching to a water tap (3/4" RH connection).
• Izhodni priključek: Bottom connection for attaching a garden hose or irrigation system.
• Nadzorni gumb: Front-facing dial for selecting watering programs and settings.
• LED indikator: Provides visual feedback on the program status.
• Predal za baterije: Located on the back, houses 2 AAA batteries.

Slika 1: Spredaj view of the AQUA CONTROL C4200 Watering Programmer, showing the blue control dial and white body.

Slika 2: Pod kotom view of the AQUA CONTROL C4200, highlighting its compact design and connection points.

Nastavitev

1. Namestite baterije:

   Locate the battery compartment on the back of the unit. Open the cover and insert 2 AAA batteries, ensuring correct polarity (+/-). Close the battery cover securely. The device requires 2 AAA batteries, which are included.
2. Povežite se z dotikom:

   Screw the inlet connector (top part) of the programmer onto your outdoor tap. The connection is designed for a standard 3/4" tap. Ensure it is tightened by hand to prevent leaks, but do not overtighten.

   

   Figure 3: The AQUA CONTROL C4200 programmer securely attached to an outdoor water tap.

3. Connect Hose/Irrigation System:

   Attach your garden hose or irrigation system to the outlet connector (bottom part) of the programmer. Ensure this connection is also secure.
4. Vklopite dovod vode:

   Slowly turn on the water tap to full pressure. The programmer is now ready for programming.

Navodila za uporabo

The AQUA CONTROL C4200 features easy programming with a single button and a control dial. It comes with 12 predefined watering programs.

Selecting a Watering Program

1. The control dial allows you to select from various watering durations and frequencies. Rotate the dial to align the desired program with the indicator mark.
2. The dial includes settings for watering duration (e.g., 15 min, 30 min, 60 min) and frequency (e.g., every 2 hours, 12 hours, 24 hours, 48 hours, or weekly).
3. Once a program is selected, the LED indicator will confirm the selection and the program will begin according to its schedule.
4. To turn the programmer OFF, rotate the dial to the "OFF" position.

Slika 4: Bližnji posnetek view of the control dial, showing the various predefined watering programs and the LED indicator.

Funkcija zakasnitve

The "Delay" function allows you to postpone the start of the selected watering program. This is useful if it's raining or if you need to perform manual watering.

• To activate the delay function, press and hold the single button on the programmer for 3 seconds.
• The LED indicator will signal that the delay function is active. The program will resume after the delay period, which is typically a fixed duration (e.g., 24 hours) or until the next scheduled watering cycle, depending on the model's specific implementation.

Vzdrževanje

• Čiščenje: Wipe the exterior of the programmer with a damp krpo. Ne uporabljajte abrazivnih čistil ali topil.
• Čiščenje filtra: Periodically check the filter washer located in the inlet connector for debris. Clean it under running water if necessary to ensure proper water flow.
• Zamenjava baterije: Replace batteries when the LED indicator shows a low battery warning or if the unit stops functioning. Always use fresh AAA alkaline batteries.
• Zimska shramba: During winter months or periods of freezing temperatures, disconnect the programmer from the tap and store it indoors in a dry, frost-free location. Remove batteries before storage.

Odpravljanje težav

Specifikacije

Slika 5: Embalaža izdelka s poudarkom na ključnih lastnostih in specifikacijah.

Figure 6: Back of the product packaging, showing connection details and a QR code for additional information. The QR code links to http://bit.ly/Click4200.

Garancija in podpora

AQUA CONTROL products are manufactured to high-quality standards. For any issues or support inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Manufacturer: Aqua Control

For more information, you may visit the official AQUA CONTROL website or refer to the resources provided on the product packaging, such as the link: http://bit.ly/Click4200.