1. Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of the CDVI 433MHz Radio Keypad (Digicode) and its associated SEL2641R433NN 1-Relay 12V Receiver. This system is designed for secure access control applications.
Pred kakršno koli namestitvijo ali upravljanjem natančno preberite ta priročnik, da zagotovite pravilno delovanje in varnost.
Figure 1: CDVI 433MHz Radio Keypad and SEL2641R433NN Receiver. The image shows the silver-colored keypad with illuminated blue numbers (0-9, A, B, C) and a transparent plastic receiver unit.
2. Varnostne informacije
- Pred namestitvijo ali vzdrževanjem se prepričajte, da je napajanje izklopljeno.
- Namestitev naj izvaja samo usposobljeno osebje.
- Do not expose the keypad or receiver to extreme temperatures, moisture, or direct sunlight.
- Use only specified power supply (12V).
- Hraniti izven dosega otrok.
3. Nastavitev in namestitev
3.1. Komponente večview
Sistem je sestavljen iz dveh glavnih komponent:
- Radio Keypad (Digicode): The input device for entering access codes.
- SEL2641R433NN Receiver: The unit that receives signals from the keypad and controls the access mechanism (e.g., door lock).
3.2. Namestitev tipkovnice
- Choose a suitable mounting location, typically near the access point, ensuring it is protected from direct weather exposure if outdoors.
- Mark the drilling points using the keypad's mounting plate as a template.
- Izvrtajte luknje in vstavite ustrezne stenske vložke.
- Montažno ploščo pritrdite na steno.
- Attach the keypad securely to the mounting plate.
3.3. Ožičenje sprejemnika
The SEL2641R433NN receiver requires a 12V power supply and connection to the access control device. Refer to the wiring diagram below for typical connections.
- Vhodna moč: Connect 12V DC to the designated terminals. Observe polarity.
- Izhod iz releja: The receiver has one relay. Connect the Normally Open (NO) or Normally Closed (NC) contacts to your access control device (e.g., electric strike, magnetic lock) as required.
(Note: A detailed wiring diagram is typically provided with the physical product. Consult it for specific terminal assignments.)
4. Navodila za uporabo
4.1. Začetni vklop
Once the receiver is wired and powered, it will enter a standby mode. The keypad will illuminate when a button is pressed.
4.2. Programming Access Codes
The keypad and receiver must be paired, and access codes programmed. This process typically involves:
- Vstop v način programiranja: This usually involves a master code or a physical button on the receiver.
- Adding New Codes: Follow the specific sequence to input new user codes (e.g., Master Code + * + New Code + #).
- Deleting Codes: Follow the specific sequence to remove existing user codes.
- Izhod iz načina programiranja: Save changes and exit programming mode.
(Note: Refer to the specific programming instructions provided with your product for exact key sequences and procedures, as these can vary by firmware version.)
4.3. Odobritev dostopa
To grant access, simply enter a valid programmed code on the keypad. Upon successful code entry, the receiver's relay will activate for a pre-set duration, unlocking the connected device.
5. Vzdrževanje
- Čiščenje: Površino tipkovnice očistite z mehko krpoamp krpo. Ne uporabljajte abrazivnih čistil ali topil.
- Redni pregledi: Periodically check all wiring connections for security and integrity, especially for the receiver unit.
- Upravljanje kode: Redno ponovnoview and update access codes for security purposes. Delete codes of former users.
6. Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Tipkovnica se ne odziva. | No power to receiver or keypad not paired. | Check 12V power supply to receiver. Ensure keypad is correctly paired with the receiver. |
| Access code not working. | Incorrect code entered, code not programmed, or keypad/receiver not paired. | Verify code. Re-program code. Re-pair keypad and receiver. |
| Door/lock not activating. | Incorrect wiring to lock, faulty lock, or relay issue. | Check wiring connections. Test the lock mechanism independently. Consult a technician if relay is suspected faulty. |
| Short range or intermittent operation. | Radio interference or receiver antenna issue. | Check for sources of radio interference. Ensure receiver antenna is unobstructed. |
7. Specifikacije
| Funkcija | Podrobnost |
|---|---|
| Številke modelov | SEL2641R433NN, GALEOR1R, F1002000052 |
| Pogostost | 433MHz |
| Napajanje sprejemnika | 12V DC |
| Relejni izhod | 1 Relay (NO/NC contacts) |
| Vrsta tipkovnice | Radio (brezžični) |
| ASIN | B06VWH6V57 |
8. Garancija in podpora
Information regarding product warranty is typically provided with the purchase documentation or can be found on the manufacturer's official webspletnega mesta. Prosimo, shranite dokazilo o nakupu za uveljavljanje garancije.
For technical support or further assistance, please contact CDVI customer service or your authorized dealer. Contact details can usually be found on the CDVI webspletno mesto (www.cdvi.com).
