Hormann HSE4 868 BS (4511738)

Hormann HSE4 868 BS BiSecur 4-Channel Remote Control

Model: HSE4 868 BS (4511738)

Uvod

This instruction manual provides comprehensive guidance for the proper use and maintenance of your Hormann HSE4 868 BS BiSecur 4-channel remote control. This device is designed for operating Hormann garage doors and gate operators. It utilizes BiSecur technology with a frequency of 868.3 MHz, featuring 128-bit encryption for enhanced security and reliable signal transmission over extended distances.

Hormann HSE4 868 BS BiSecur 4-Channel Remote Control

Slika 1: Hormann HSE4 868 BS BiSecur 4-Channel Remote Control. This image shows the compact, black matte remote control with four distinct buttons for operation.

Varnostna navodila

Nastavitev

1. Namestitev baterije

The remote control comes with a pre-installed CR2032 lithium battery. If replacement is needed, follow these steps:

  1. Poiščite predal za baterije na zadnji strani daljinskega upravljalnika.
  2. Carefully open the compartment cover using a small flat-head screwdriver or a similar tool.
  3. Odstranite staro baterijo CR2032.
  4. Insert a new CR2032 lithium battery with the positive (+) side facing upwards.
  5. Trdno zaprite pokrov prostora za baterije.

2. Programiranje daljinskega upravljalnika

The Hormann HSE4 868 BS remote control can be programmed to your garage door or gate operator. The programming procedure is typically straightforward and does not require special equipment. Refer to your specific garage door or gate operator's manual for detailed programming instructions, as procedures may vary.

Združljivost: This remote control is compatible with other BiSecur transmitters such as HS1/HS4/HS5 868 BS, HSE2 868 BS, HSS4 868 BS, HSP4 868 BS, HSD2 868 BS, HSZ1/HSZ2 868 BS. It also replaces older Hormann transmitters operating on 868.3 MHz frequency with blue buttons (e.g., HS1/HS2/HS4 868, HSE2 868, HSM2/HSM4 868, HSP4/HSP4-C 868, HSD2-C/HSD2-A 868, HSZ1/HSZ2 868). New BiSecur transmitters are compatible with all automatic operators produced since 2005.

Note: Older type Hormann transmitters will not work with new type motors equipped with the BiSecur system.

Upravljanje daljinskega upravljalnika

The HSE4 868 BS remote control features four buttons, allowing you to control up to four different functions or devices (e.g., opening/closing a garage door, operating a gate, switching on/off lights, if supported by your operator).

  1. Funkcija gumba: Each button, once programmed, will activate its assigned function. Press the desired button briefly to send the command to your operator.
  2. Prenos signala: The remote uses BiSecur bi-directional FM radio signals for secure and reliable communication.
  3. Razdalja delovanja: The typical operating range is up to 100 meters, depending on environmental conditions and obstacles.

Vzdrževanje

Zamenjava baterije

When the remote control's range decreases significantly or it stops responding, the battery may need replacement. Refer to the "Battery Installation" section under Setup for detailed instructions. Always use a new CR2032 lithium battery.

Čiščenje

Clean the remote control with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the device.

Odpravljanje težav

TežavaMožen vzrokrešitev
Remote control does not operate the door/gate.
  • Baterija je prazna.
  • Remote control is not programmed correctly.
  • Izven dosega.
  • motnje.
  • Zamenjajte baterijo (CR2032).
  • Reprogram the remote control according to your operator's manual.
  • Premaknite se bližje sprejemniku.
  • Check for sources of radio interference.
Zmanjšan doseg delovanja.
  • Nizka baterija.
  • Obstacles blocking the signal.
  • Motnje okolja.
  • Zamenjajte baterijo.
  • Zagotovite neoviran pogled na sprejemnik.
  • Poskusite delovati z druge lokacije.

Specifikacije

Garancija in podpora

For warranty information, please refer to the documentation provided with your purchase or contact your Hormann dealer. For technical support or further assistance, please visit the official Hormann webali se obrnite na njihov oddelek za pomoč uporabnikom.

Note: Availability of spare parts and software updates information is not provided in the product details.

Povezani dokumenti - HSE4 868 BS (4511738)

Prejview HÖRMANN HSI 6/15 BiSecur Industrie-Handsender: Bedienungsanleitung & Sicherheitshinweise
Bedienungsanleitung für den HÖRMANN HSI 6/15 BiSecur Industrie-Handsender. Enthält Anleitungen zur Installation, Bedienung, Sicherheitshinweise, technische Daten und EU-Konformitätserklärung für zuverlässige Tor- und Türsteuerung.
Prejview Hormann FIT 2-1 BiSecur Notranje brezžično tipkalo: Navodila za montažo in uporabo
Obsežen priročnik za notranje radijsko stikalo Hormann FIT 2-1 BiSecur, ki zajema namestitev, delovanje, varnost in tehnične specifikacije. Naučite se namestiti, priključiti in uporabljati to napravo za avtomatizacijo garažnih vrat ali dvoriščnih vrat.
Prejview HÖRMANN HSE 1/4 BiSecur ročni oddajnik Bedienungsanleitung
Diese Anleitung bietet detaillierte Informationen zur Bedienung, Installation und Wartung des HÖRMANN HSE 1/4 BiSecur Handsenders. Erfahren Sie mehr über Sicherheitshinweise, das Programmieren von Funkcodes und technische Spezifikationen für Ihren Garagentor- oder Hoftoröffner.
Prejview HORMANN 868 BS BiSecur Remote Control Programming and Reset Guide
Comprehensive guide to programming, resetting, and setting fixed codes for the HORMANN 868 BS BiSecur remote control. Includes instructions for 868MHz operation and various models like HS1, HS4, HS5, HSE1, HSE2, HSE4, HSP4, HSD2, HSS4.
Prejview Sprejemnik Hormann HEI 3 BiSecur: Navodila za montažo in uporabo
Obsežen priročnik za sprejemnik Hormann HEI 3 BiSecur, ki zajema namestitev, delovanje, varnost in tehnične specifikacije. Naučite se namestiti, priključiti in programirati sprejemnik BiSecur za optimalno delovanje.
Prejview HÖRMANN HEI 3 BiSecur Funkempfänger: pontage- und Betriebsanleitung
Detaillierte Anleitung zur Montage, Installation und Bedienung des HÖRMANN HEI 3 BiSecur Funkempfängers. Enthält Sicherheitshinweise, technische Daten und Konformitätserklärungen.