1. Uvod
This manual provides detailed instructions for the proper setup, operation, and maintenance of your Newland HR1250-70 handheld barcode scanner. The HR1250-70 is a 1D CCD barcode reader designed for efficient data capture, featuring a direct 2-meter USB cable for convenient connectivity.
2. Izdelek je končanview
The Newland HR1250-70 is a robust handheld barcode scanner. Its ergonomic design ensures comfortable use during extended periods. Key features include 1D barcode scanning capability and a direct USB connection for power and data transfer.
Slika 2.1: Spredaj view of the Newland HR1250-70 handheld barcode scanner, showing the scanning window and ergonomic grip.
Slika 2.2: stran view of the Newland HR1250-70 barcode scanner, highlighting its compact form factor and trigger button.
3. Nastavitev
- Razpakirajte skener: Carefully remove the HR1250-70 scanner from its packaging. Ensure all components are present.
- Povezava z gostiteljsko napravo: The scanner features an integrated 2-meter USB cable. Plug the USB connector into an available USB port on your desktop or laptop computer.
- Namestitev gonilnikov (samodejna): In most operating systems (Windows, macOS, Linux), the necessary drivers will install automatically upon connection. Wait for the system to confirm successful device installation.
- Testna povezava: Open a text editor (e.g., Notepad, Word) or any application that accepts keyboard input. Scan a known barcode. The barcode data should appear in the text editor, confirming successful setup.
4. Navodila za uporabo
The HR1250-70 is designed for straightforward operation. Follow these steps to scan barcodes:
- Vklop: The scanner powers on automatically when connected to a USB port. A successful power-on is indicated by a brief flash of the scanner's light and/or an audible beep.
- Cilj in skeniranje: Hold the scanner with the scanning window facing the barcode. Press and hold the trigger button. A red aiming line will project from the scanner. Position the aiming line across the entire barcode.
- Potrdi skeniranje: Once the barcode is successfully read, the scanner will emit an audible beep and/or the indicator light will change color (e.g., from red to green). The decoded data will be transmitted to your connected device as keyboard input.
- Podprte črtne kode: The HR1250-70 supports various 1D barcode symbologies, including Codabar and Code 11. Refer to the full product documentation for a complete list of supported codes.
5. Vzdrževanje
Pravilno vzdrževanje zagotavlja dolgo življenjsko dobo in optimalno delovanje vašega skenerja.
- Čiščenje okna za skeniranje: Narahlo uporabite mehko krpo, ki ne pušča vlaken dampened with water or a mild, non-abrasive cleaning solution. Gently wipe the scanning window to remove dust and smudges. Avoid using harsh chemicals or abrasive materials, as these can scratch the window and impair scanning performance.
- Čiščenje C-jaasing: Obrišite zunanjost casinz mehko, suho krpo.
- Shranjevanje: Ko skenerja ne uporabljate, ga shranjujte v čistem in suhem okolju, stran od neposredne sončne svetlobe in ekstremnih temperatur.
- Pregled kabla: Periodically inspect the USB cable for any signs of damage, such as cuts or fraying. If damage is detected, discontinue use and contact support.
6. Odpravljanje težav
If you encounter issues with your HR1250-70 scanner, refer to the following common problems and solutions:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Skener se ne vklopi. | Kabel USB ni pravilno priključen ali pa so vrata USB okvarjena. | Ensure the USB cable is securely plugged into both the scanner and the host device. Try a different USB port or a different host device. |
| Skener ne bere črtnih kod. | Barcode damaged, scanning window dirty, incorrect aiming, or unsupported barcode type. | Ensure the barcode is clear and undamaged. Clean the scanning window. Aim the red line across the entire barcode. Verify the barcode type is supported by the HR1250-70. |
| Skenirani podatki so napačni ali nepopolni. | Partial scan, barcode damage, or software configuration issue. | Ensure the entire barcode is covered by the aiming line. Try scanning the barcode multiple times. Check the settings of the application receiving the data. |
7. Specifikacije
| Funkcija | Podrobnost |
|---|---|
| Številka modela | HR1250-70 |
| Tehnologija skeniranja | CCD (nabojno sklopljena naprava) |
| Simbologije črtne kode | 1D (e.g., Codabar, Code 11) |
| Povezljivost | USB Cable (2 meters) |
| Združljive naprave | Namizni računalnik, prenosni računalnik |
| Vir napajanja | Električni z žico (prek USB-ja) |
| Dimenzije izdelka | 2.69 x 6.42 x 2.3 palcev |
| Teža predmeta | 7 unč |
| Proizvajalec | Newland |
8. Podpora
For further assistance, technical support, or warranty inquiries regarding your Newland HR1250-70 barcode scanner, please contact Newland customer service or visit the official Newland website. Please have your model number (HR1250-70) and any relevant purchase information ready when contacting support.
Note: Specific warranty terms and conditions may vary by region and retailer. Please refer to your purchase documentation for details.