HobbyWing Quicrun 1060 Brushed ESC Instruction Manual

1. Izdelek je končanview

The HobbyWing Quicrun 1060 Brushed Electronic Speed Controller (ESC) is engineered for 1/10 and 1/12 scale remote-controlled cars and trucks. This waterproof unit offers reliable performance and is designed for ease of use, featuring a Tamiya battery plug for broad compatibility. It supports various running modes and battery types, making it a versatile choice for brushed motor setups.

Figure 1: HobbyWing Quicrun 1060 Brushed ESC

2. Kaj je v škatli

• Hobbywing speed control with Tamiya battery plug

3. Ključne značilnosti

• 60 Amp Power: Provides robust power delivery for brushed motors.
• Waterproof Electronics: Ensures reliable operation in various environmental conditions.
• Multiple Running Modes: Supports Forward/Reverse/Brake, Forward/Brake, and Forward/Reverse modes.
• LiPo Cutoff Capability: Compatible with LiPo batteries up to 3S, with built-in low voltage cutoff protection.
• Integrated Tamiya Battery Plug: Simplifies connection to common RC battery packs.

Figure 2: Tamiya Logo, indicating compatible battery plug type.

4. Nastavitev in namestitev

4.1 Žične povezave

1. Povezava motorja: Connect the ESC's motor wires (blue and yellow) to your brushed motor. The order may affect motor rotation; reverse if necessary.
2. Priključek baterije: Plug your battery pack into the ESC's Tamiya connector. Ensure correct polarity.
3. Povezava sprejemnika: Plug the ESC's signal cable (usually black, red, white/yellow) into the throttle channel (typically Channel 2) of your RC receiver.
4. Stikalo za vklop: Mount the power switch in an accessible location on your vehicle.

4.2 Jumper Cap Settings

The Quicrun 1060 ESC uses jumper caps to configure various settings, including running mode, battery type, and BEC output voltage. Refer to the detailed chart in your physical user manual for specific configurations. Incorrect settings can damage the ESC or battery.

Key Jumper Settings:

• Način teka: Select between Forward/Reverse/Brake, Forward/Brake, or Forward/Reverse.
• Vrsta baterije: Choose between NiMH or LiPo to ensure proper low voltage izrez.
• BEC Izhod Voltage: Prilagodite glasnosttage supplied to your receiver and servos (e.g., 6.0V or 7.4V).

4.3 Kalibracija plina

To ensure proper operation, the ESC must be calibrated to your transmitter's throttle range. Follow these general steps:

1. Turn on your transmitter and ensure all throttle trims are at neutral.
2. Priključite baterijo na ESC.
3. Hold the throttle stick at full throttle (highest position) and turn on the ESC.
4. The motor will emit a series of beeps. Once you hear the first beep, move the throttle stick to full brake (lowest position).
5. After another series of beeps, move the throttle stick to the neutral position.
6. The ESC will emit a final series of beeps, indicating successful calibration.

5. Načini delovanja

The Quicrun 1060 ESC offers three primary operating modes, configurable via jumper caps:

• Forward/Reverse/Brake Mode: Standard mode for general driving, allowing forward, reverse, and braking.
• Forward/Brake Mode: Ideal for racing, providing only forward movement and braking, with no reverse.
• Način naprej/nazaj: Suitable for rock crawling or specific applications where immediate reverse is needed without a brake delay.

Consult your user manual's jumper cap chart for detailed instructions on how to select each mode.

6. Vzdrževanje

• Čiščenje: Regularly clean the ESC to remove dirt, dust, and debris. Use a soft brush or compressed air.
• Pregled: Periodically check all wires and connectors for signs of wear, damage, or loose connections.
• Shranjevanje: ESC shranjujte v suhem in hladnem okolju, stran od neposredne sončne svetlobe in ekstremnih temperatur.

7. Odpravljanje težav

• Brez napajanja: Check battery connection, power switch, and ensure the battery is charged.
• Motor se ne odziva: Verify receiver connection, throttle calibration, and motor wiring.
• Nepravilno delovanje: Re-calibrate the throttle range. Check for interference or loose connections.
• Pregrevanje: Ensure proper ventilation around the ESC. Check motor load and gearing.

For more detailed troubleshooting, refer to the comprehensive troubleshooting guide in your user manual or contact HobbyWing support.

8. Specifikacije

9. Garancija in podpora

For warranty information, technical support, or service inquiries, please refer to the documentation included with your product or visit the official HobbyWing webspletnega mesta. Shranite dokazilo o nakupu za morebitne garancijske zahtevke.