Dynojet Power Vision PV-2B CAN-Bus User Manual

1. Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Dynojet Power Vision PV-2B CAN-Bus device. The Power Vision is a performance tuning and diagnostic device for vehicles utilizing a CAN-Bus system, designed to optimize engine performance and provide real-time data monitoring.

Pred uporabo naprave natančno preberite ta priročnik, da zagotovite pravilno delovanje in preprečite poškodbe.

2. Varnostne informacije

Vedno upoštevajte naslednje varnostne ukrepe:

• Ensure the vehicle's ignition is off before connecting or disconnecting the Power Vision device.
• Do not attempt to modify the device or its internal components.
• Napravo ne izpostavljajte ekstremnim temperaturam, vlagi in neposredni sončni svetlobi.
• Only use the provided cables and accessories with the Power Vision.
• Consult a qualified technician if you are unsure about any installation or tuning procedures.

3. Vsebina paketa

Preverite, ali so v paketu prisotni vsi elementi:

• Dynojet Power Vision Black PV-2B CAN-Bus Device
• Vehicle Connection Cable
• USB Cable (for PC connection)
• Vodnik za hiter začetek (za podrobnosti glejte ta priročnik)

4. Izdelek je končanview

Figure 4.1: Dynojet Power Vision PV-2B Device

The Dynojet Power Vision PV-2B is a compact, handheld device featuring a color touchscreen display. It includes a multi-pin connector cable for direct interface with your vehicle's diagnostic port. The screen displays various menu options such as "Program Vehicle" for flashing custom tunes, "Datalog" for recording vehicle data, "Vehicle Tools" for diagnostic functions, "Settings" for device configuration, "Device Info" for firmware details, and "Dealer Info". A USB port is also present for connecting to a computer for updates and file prenosi.

4.1 Lastnosti naprave

• Flash tunes to your vehicle's ECU.
• Display real-time vehicle data (sensors, RPM, speed, etc.).
• Read and clear diagnostic trouble codes (DTCs).
• Perform diagnostic tests.
• Log data for analysis.
• Kompakten in trpežen dizajn.

5. Nastavitev

5.1 Začetna nastavitev naprave

1. Napolnite napravo: Connect the Power Vision to a computer using the supplied USB cable. Allow the device to charge fully before first use.
2. Namestite programsko opremo: Download and install the latest WinPV software from the official Dynojet website onto your computer. This software is required for device updates and tune management.
3. Posodobite vdelano programsko opremo: Once WinPV is installed, connect the Power Vision to your computer. Follow the on-screen prompts in WinPV to update the device firmware to the latest version.

5.2 Priključitev na vozilo

1. Locate your vehicle's diagnostic port (typically a 4-pin or 6-pin connector for motorcycles, or an OBD-II port for other vehicles). Refer to your vehicle's service manual for exact location.
2. Prepričajte se, da je kontakt vozila v položaju IZKLOP.
3. Connect the Power Vision vehicle cable to the diagnostic port. Ensure a secure connection.
4. Connect the other end of the vehicle cable to the Power Vision device.
5. Turn the vehicle's ignition to the ON position (do not start the engine unless instructed by a specific procedure). The Power Vision device should power on automatically.

6. Navodila za uporabo

6.1 Navigacija po meniju

The Power Vision features a touchscreen interface. Tap on the desired icon to select a function.

• Programsko vozilo: Used to flash custom tunes or restore stock tunes to your vehicle's ECU.
• Podatkovni dnevnik: Initiates data logging sessions to record various vehicle parameters.
• Vehicle Tools: Access diagnostic functions such as reading/clearing DTCs, performing system tests, and viewobdelavo podatkov v živo.
• nastavitve: Configure device preferences, display options, and unit measurements.
• Informacije o napravi: Displays device serial number, firmware version, and other internal information.
• Informacije o prodajalcu: Provides contact information for your Dynojet dealer (if configured).

6.2 Flashing a Tune

1. Ensure the device is connected to the vehicle and the ignition is ON.
2. V glavnem meniju izberite "Programsko vozilo".
3. Follow the on-screen prompts to select the desired tune file.
4. Confirm the tune selection and initiate the flashing process. IMPORTANT: Do not interrupt the flashing process. Ensure the vehicle battery is fully charged.
5. Once complete, the device will indicate success. Turn the ignition OFF, then ON again to reset the ECU.

6.3 Zapisovanje podatkov

1. V glavnem meniju izberite "Datalog".
2. Choose the parameters you wish to log.
3. Start the logging session. The device will record data until stopped.
4. To retrieve logged data, connect the Power Vision to your computer and use the WinPV software.

7. Vzdrževanje

• Čiščenje: Use a soft, dry cloth to clean the device screen and casing. Ne uporabljajte abrazivnih čistil ali topil.
• Shranjevanje: Store the Power Vision in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
• Posodobitve vdelane programske opreme: Regularly check the Dynojet website for firmware updates to ensure optimal performance and compatibility with new vehicle models.
• Pregled kabla: Periodically inspect the connection cables for any signs of wear or damage. Replace if necessary.

8. Odpravljanje težav

9. Specifikacije

10. Podpora

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Dynojet Research directly.

• Webspletno mesto: www.dynojet.com
• Refer to the official Dynojet webspletno mesto za najnovejše kontaktne podatke in vire za podporo.