Turtle Beach Stealth 350VR Amplified Virtual Reality Gaming Headset Instruction Manual

1. Uvod

The Turtle Beach Stealth 350VR gaming headset is engineered to deliver clear, amplified Virtual Reality audio. It features a battery-powered design, Variable Bass Boost, and an ergonomic structure specifically tailored for VR use, providing ample clearance for VR headbands and cables. Equipped with large 50mm speakers, it offers a rich and expansive audio experience. The lightweight build and comfortable fabric-wrapped memory foam ear cushions ensure extended comfort during use. A removable noise-cancelling microphone guarantees crystal-clear communication, complemented by Mic Monitoring, which allows users to hear their own voice to prevent shouting. Convenient on-board audio controls are easily accessible directly on the headset.

Slika 1: Spredaj view of the Turtle Beach Stealth 350VR Headset.

2. Nastavitev

2.1 Povezava mikrofona

To connect the noise-cancelling microphone, firmly insert it into the dedicated jack located on the left ear cup of the headset. Ensure a solid connection for optimal chat clarity.

Figure 2: Close-up of the left ear cup showing the microphone jack.

2.2 Vklop/izklop

Locate the power switch on the left ear cup. Slide the switch upwards to power on the headset. A blue LED indicator will illuminate, confirming the headset is active. To power off, slide the switch downwards.

2.3 Polnjenje slušalk

The Stealth 350VR features an internal rechargeable battery, providing up to 30 hours of amplified VR audio. To charge, connect the included USB charging cable to the charging port on the headset and a compatible USB power source.

2.4 Connecting to a VR Device (e.g., PlayStation VR)

Ensure your VR device (e.g., PSVR) is fully set up and powered on. Connect the Stealth 350VR to the VR device using the included short audio cable. The right-angle connector side of the audio cable should be connected to the VR device's inline port. After connecting, power on your Stealth 350VR headset. Adjust the VR device's volume to maximum, then use the headset's controls for your preferred volume level.

For PlayStation 4 setup: Go to nastavitve > Naprave > Avdio naprave. Nastavite Vhodna in izhodna naprava to the headset connected to the controller. Set Izhod za slušalke do Vsi zvoki. Nastavite Nadzor glasnosti (slušalke) to maximum. Select Prilagodite raven mikrofona and follow on-screen instructions to calibrate.

3. Upravljanje slušalk

All primary audio controls are conveniently located on the left ear cup of the headset.

3.1 Mic Mute

To mute or unmute the microphone, slide the dedicated switch on the face of the left ear cup left or right.

3.2 Glavna glasnost

Adjust the master volume dial to control the overall audio output level of your Stealth 350VR headset.

3.3 Variable Bass Boost

Use the Variable Bass Boost slider to increase or decrease the bass levels, enhancing immersion in your VR experience.

4. Vzdrževanje

To ensure the longevity and optimal performance of your Turtle Beach Stealth 350VR headset, follow these maintenance guidelines:

• Čiščenje: Za brisanje ušesnih školjk in naglavnega traku uporabite mehko, suho krpo. Izogibajte se uporabi agresivnih kemikalij ali abrazivnih materialov.
• Shranjevanje: Slušalke shranjujte na hladnem in suhem mestu, stran od neposredne sončne svetlobe in ekstremnih temperatur.
• Skrb za kabel: Handle all cables with care. Avoid sharp bends or excessive pulling, which can damage internal wiring.
• Mikrofon: When not in use, the detachable microphone can be removed and stored separately to prevent damage.

5. Odpravljanje težav

If you encounter issues with your Stealth 350VR headset, consider the following common solutions:

• Brez zvoka/nizka glasnost:
  • Prepričajte se, da so slušalke vklopljene in popolnoma napolnjene.
  • Preverite vse kabelske povezave in se prepričajte, da so varni.
  • Verify that the master volume dial on the headset is turned up.
  • Confirm that the audio output settings on your VR device or console are correctly configured (refer to Section 2.4 for PS4 settings).
• Mikrofon ne deluje:
  • Ensure the microphone is firmly inserted into its jack.
  • Check that the mic mute switch on the headset is in the unmute position.
  • Verify microphone input settings on your VR device or console.
• Popačen zvok:
  • Lower the master volume on the headset or your connected device.
  • Adjust the Variable Bass Boost to see if it resolves the distortion.
  • Prepričajte se, da nobena druga avdio naprava ne moti delovanja.

6. Specifikacije

7. Garancija in podpora

For warranty information, technical support, and additional resources, please visit the official Turtle Beach webspletno mesto ali se obrnite na njihovo službo za stranke. Shranite dokazilo o nakupu za uveljavljanje garancije.

Spletna podpora: www.turtlebeach.com/support