1. Uvod
This manual provides detailed instructions for the installation, programming, operation, and maintenance of your Weiser Powerbolt Electronic Deadbolt, Model 9GED14600-101. This electronic deadbolt offers enhanced security and convenience with its keyless touchpad entry and traditional key access. Please read this manual thoroughly before installation and use to ensure proper function and to maximize the lifespan of your product.
Slika 1: Spredaj view of the Weiser Powerbolt Electronic Deadbolt, showcasing the keypad and keyhole. This image displays the gold finish of the lock.
2. Pomembne varnostne informacije
Za preprečitev poškodb ali škode na izdelku upoštevajte naslednje varnostne ukrepe:
- Do not attempt to disassemble or modify the lock beyond the instructions provided in this manual.
- Uporabljajte samo predpisano vrsto baterij (4 baterije AA). Ne mešajte starih in novih baterij ali različnih vrst baterij.
- Vse sestavne dele, zlasti majhne dele, hranite izven dosega otrok.
- Ensure proper alignment during installation to prevent binding or excessive force on the deadbolt mechanism.
- Tipkovnico zaščitite pred prekomerno vlago ali neposredno izpostavljenostjo vodi.
3. Vsebina paketa
Pred začetkom namestitve preverite, ali so prisotne vse komponente:
- Sklop zunanje tipkovnice
- Interior Assembly (Turn Knob)
- Zapah z zapahom
- Udarna plošča
- Montažna plošča
- Montažni vijaki
- Ključi (2)
- SmartKey Learning Tool
- Installation Guide / Drilling Template
Slika 2: stran view of the interior assembly of the Weiser Powerbolt Electronic Deadbolt, showing the turn knob and battery compartment area.
4. Navodila za namestitev
Before you begin, measure your door's backset, cross bore, and thickness to ensure compatibility. This lock is designed for standard door preparations with a 2-1/8" bore hole and 2-3/8" or 2-3/4" backsets.
- Pripravite vrata: If installing on a new door, use the provided drilling template to prepare the necessary holes. For existing doors, ensure the bore hole and backset are compatible.
- Namestite zapah: Insert the deadbolt latch into the edge of the door. Ensure the "UP" arrow on the latch is pointing upwards. Adjust the backset if necessary (2-3/8" or 2-3/4"). Secure with screws.
- Namestitev zunanje tipkovnice: Feed the cable from the exterior keypad assembly through the cross bore hole. Position the keypad flush against the door.
- Namestite montažno ploščo: Route the cable through the mounting plate. Secure the mounting plate to the door using the provided screws, ensuring it holds the exterior keypad in place.
- Povežite kable: Connect the cable from the exterior keypad to the interior assembly. Ensure the connection is secure.
- Montaža notranjega sklopa: Position the interior assembly over the mounting plate, aligning the turn knob shaft with the deadbolt mechanism. Secure the interior assembly to the mounting plate with the remaining screws.
- Namestite baterije: Open the battery cover on the interior assembly and insert 4 new AA alkaline batteries. Observe correct polarity. Close the battery cover.
- Testno delovanje: With the door open, test the lock's function using the turn knob and the keypad with the default code (if applicable) or a newly programmed code. Ensure the deadbolt extends and retracts smoothly without obstruction.
5. Navodila za programiranje
The Powerbolt Electronic Deadbolt allows for the creation of a Master Code and up to 6 User Codes. The Master Code is essential for programming. If not set, the first code programmed will become the Master Code.
Figure 3: Visual representation of key features of the Powerbolt 2, including One Touch Locking, Master Code, User Codes, Bump-Proof, Pick-Proof, and Kick-In Resistant technology.
5.1. Nastavitev glavne kode
The Master Code is essential for programming. If not set, the first code programmed will become the Master Code.
- Press the "Program" button (usually located on the interior assembly).
- Vnesite novo 4-8-mestno glavno kodo.
- Press the "Lock" button.
- Re-enter the new Master Code.
- Press the "Lock" button again. A successful programming tone will sound.
5.2. Dodajanje uporabniških kod
You can store up to 6 unique user codes for access.
- Vnesite svojo glavno kodo.
- Pritisnite gumb "Program".
- Press "1" (for adding a user code).
- Vnesite novo 4–8-mestno uporabniško kodo.
- Press the "Lock" button. A successful programming tone will sound.
5.3. Deleting User Codes
- Vnesite svojo glavno kodo.
- Pritisnite gumb "Program".
- Press "2" (for deleting a user code).
- Vnesite uporabniško kodo, ki jo želite izbrisati.
- Press the "Lock" button. A successful programming tone will sound.
5.4. Enabling/Disabling Auto-Lock
The lock can be set to automatically re-lock 30 seconds after unlocking.
- Omogočiti: Enter Master Code, press "Program", press "3", press "Lock".
- Če želite onemogočiti: Enter Master Code, press "Program", press "4", press "Lock".
6. Navodila za uporabo
6.1. Zaklepanje vrat
- Od zunanjosti: Press the "Lock" button on the keypad. The deadbolt will extend.
- Iz notranjosti: Rotate the turn knob to the locked position.
6.2. Odklepanje vrat
- Uporaba uporabniške kode: Enter a valid 4-8 digit User Code on the keypad. The deadbolt will retract.
- Uporaba ključa: Insert the key into the keyhole and turn to unlock.
- Iz notranjosti: Rotate the turn knob to the unlocked position.
7. Vzdrževanje
7.1. Zamenjava baterije
The lock requires 4 AA alkaline batteries. A low battery indicator will alert you when batteries need replacement. Replace all four batteries simultaneously with new ones.
- Odstranite pokrov baterije na notranjem sklopu.
- Odstranite stare baterije.
- Vstavite 4 nove alkalne baterije AA in pazite na pravilno polarnost (+/-).
- Zamenjajte pokrov baterije.
Opomba: Replacing batteries does not erase programmed codes.
7.2. Čiščenje
Ključavnico očistite z mehko krpoamp krpo. Izogibajte se abrazivnim čistilom ali topilom, saj lahko poškodujejo površino in elektronske komponente.
7.3. SmartKey Rekeying
The SmartKey cylinder allows you to rekey your lock to a new key in seconds. Refer to the separate SmartKey rekeying instructions provided with your lock or visit the Weiser website for a video tutorial. You will need your existing key, the new key, and the SmartKey learning tool.
8. Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Ključavnica se ne odziva na vnos s tipkovnico. | Dead batteries. Incorrect code entered. Keypad malfunction. | Replace batteries. Ensure correct code is entered. Use the key to unlock and contact support if issue persists. |
| Zapah se ne izvleče ali uvleče v celoti. | Misalignment during installation. Obstruction in door frame. Low batteries. | Check door and frame for obstructions. Verify lock alignment. Replace batteries. |
| Auto-lock feature not working as expected. | Auto-lock feature is disabled. | Refer to Section 5.4 to enable the auto-lock feature. |
| Lock makes unusual noises or jams. | Mechanical issue, potential deadbolt barrel misalignment or damage. | Ensure the deadbolt barrel is not obstructed or misaligned. If the issue persists, contact Weiser customer support. |
| Novih kod ni mogoče programirati. | Incorrect Master Code. Program button not pressed correctly. | Verify Master Code. Ensure the Program button is pressed firmly. Refer to Section 5. |
9. Specifikacije izdelka
- Model: 9GED14600-101
- Znamka: Weiser
- Vrsta ključavnice: Elektronski zapah tipkovnice
- Material: Medenina
- barva: zlato
- Dimenzije (D x Š x V): 6 x 11.13 x 4 palcev
- Teža artikla: 2.4 funtov
- vir energije: 4 AA baterij (niso priložene)
- Posebna lastnost: Battery Indicator, SmartKey Rekeying
- Nazaj: Nastavljivo 2-3/8" ali 2-3/4"
- Bore Hole: 2-1/8"
- Uporabniške kode: Do 6
- ANSI/BHMI Rating: 3. razred
10. Garancija in podpora strankam
For warranty information, technical assistance, or to purchase replacement parts, please contact Weiser customer support directly. Details can typically be found on the official Weiser webspletnem mestu ali v embalaži izdelka.
Weiser Official Webspletno mesto: www.weiserlock.com
Please have your model number (9GED14600-101) and purchase date available when contacting support.
