NETGEAR Powerline 1000 Adapter Kit (PL1000-100PES) User Manual

1. Izdelek je končanview

The NETGEAR Powerline 1000 Adapter Kit (PL1000-100PES) provides a simple solution to extend your internet network using your home's existing electrical wiring. This kit includes two Powerline 1000 adapters, enabling you to connect devices like smart TVs, gaming consoles, and computers to the internet in areas where Wi-Fi signals may be weak or unreliable.

Slika: spredaj view of the NETGEAR Powerline 1000 Adapter.

2. Nastavitev

2.1 Vsebina paketa

Preverite, ali vaš paket vsebuje naslednje elemente:

• Two (2) NETGEAR Powerline 1000 Adapters (PL1000)
• Two (2) Ethernet cables
• Kratki vodnik (ni vključen v ta priročnik)

2.2 koraki namestitve

Za nastavitev omrežja Powerline sledite tem korakom:

1. Priključite prvi adapter: Plug one Powerline adapter directly into an electrical outlet near your internet router or modem. Do not use a power strip or extension cord, as this can degrade performance.
2. Povezava z usmerjevalnikom/modemom: Use one of the provided Ethernet cables to connect the Powerline adapter to an available LAN port on your router or modem.
3. Priključite drugi adapter: Plug the second Powerline adapter directly into an electrical outlet in the room where you want to extend your network.
4. Povežite svojo napravo: Use the second Ethernet cable to connect your network-enabled device (e.g., computer, smart TV, gaming console) to the second Powerline adapter.
5. Preverite povezavo: Wait for the Powerline LED on both adapters to turn solid green, indicating a successful connection.

Image: A NETGEAR Powerline 1000 Adapter plugged into a wall outlet, ready for connection.

Image: Diagram illustrating how two Powerline adapters connect to a router and an Ethernet-enabled device in different rooms, utilizing the home's electrical wiring.

3. Delovanje

3.1 Razumevanje LED indikatorjev

The Powerline adapters feature LED indicators to show their status:

Slika: spredaj view of the Powerline 1000 Adapter showing the Power, Powerline, and Ethernet LED indicators.

3.2 Pairing Powerline Adapters

Your Powerline adapters are typically pre-paired from the factory. If they do not connect automatically (Powerline LED is off or blinking), you may need to pair them manually:

1. Plug both Powerline adapters into electrical outlets in the same room.
2. Press the Security button (often labeled 'Pair' or 'Security') on the side or bottom of the first adapter for 2 seconds. The Powerline LED will start blinking.
3. Within two minutes, press the Security button on the second adapter for 2 seconds. Its Powerline LED will also start blinking.
4. After a short period, the Powerline LEDs on both adapters should turn solid green, indicating a successful secure connection.

4. Vzdrževanje

4.1 Vzdrževanje in čiščenje

• Keep the adapters in a dry environment, away from excessive heat or moisture.
• Do not block the ventilation holes on the adapters.
• To clean, gently wipe the surface with a soft, dry cloth. Do not use liquid or aerosol cleaners.

4.2 Ponastavitev na tovarniške nastavitve

If you experience persistent issues or wish to clear all settings, you can perform a factory reset:

Slika: Spodaj view of the Powerline 1000 Adapter, highlighting the Ethernet port and the recessed Factory Reset button.

1. With the adapter plugged into an electrical outlet, use a paperclip or similar pointed object to press and hold the recessed Ponastavitev na tovarniške nastavitve približno 10 sekundi.
2. Release the button when the LEDs briefly flash. The adapter will restart with factory default settings.

5. Odpravljanje težav

5.1 Pogoste težave in rešitve

• No Powerline Connection (Powerline LED Off):
  Ensure both adapters are plugged directly into wall outlets, not power strips. Try different outlets. Perform manual pairing as described in Section 3.2.
• Počasna hitrost povezave:
  Avoid plugging adapters into outlets on different electrical circuits if possible. Remove any high-power electrical appliances (e.g., washing machines, refrigerators) from outlets near the adapters, as they can cause interference.
• Brez dostopa do interneta:
  Verify that your router/modem is working correctly and has an active internet connection. Ensure the Ethernet cable between the first adapter and the router is securely connected. Check the Ethernet LED on both adapters.
• Adapter se ne odziva:
  Unplug the adapter from the wall outlet, wait 10 seconds, and plug it back in. If the issue persists, perform a factory reset (Section 4.2).

6. Specifikacije

6.1 Tehnične specifikacije

7. Garancija in podpora

7.1 Informacije o garanciji

NETGEAR products typically come with a limited hardware warranty. For specific warranty terms and conditions applicable to your region and product, please refer to the warranty card included with your purchase or visit the official NETGEAR webmesto.

7.2 Podpora strankam

For further assistance, technical support, or to download the latest firmware and documentation, please visit the official NETGEAR support webspletno mesto. Tam lahko najdete podrobna pogosta vprašanja, vodnike za odpravljanje težav in kontaktne podatke za podporo strankam.