Legrand 138074 Manual Call Point Instruction Manual

1. Izdelek je končanview

The Legrand 138074 is a manual call point designed for fire alarm systems. It features a white housing, two contacts, and an integrated LED indicator. This device allows for manual activation of a fire alarm in emergency situations, providing a clear visual and tactile indication of activation.

Slika 1: Spredaj view of the Legrand 138074 Manual Call Point.

2. Varnostne informacije

Pred namestitvijo ali uporabo te naprave preberite in razumite vsa varnostna navodila. Neupoštevanje teh navodil lahko povzroči materialno škodo, telesne poškodbe ali smrt.

• Profesionalna namestitev: Installation must be performed by qualified personnel in accordance with all local and national electrical codes and fire safety regulations.
• Odklop napajanja: Always disconnect power to the circuit before performing any installation, maintenance, or troubleshooting.
• voltage Preverite: Preverite, ali je voltage matches the device's specifications.
• Okoljski pogoji: Do not install in areas with excessive moisture, extreme temperatures, or corrosive environments.
• Celovitost komponent: Naprave ne uporabljajte, če je kateri koli del poškodovan.

3. Vsebina paketa

Po odprtju embalaže preverite, ali so vse komponente prisotne in nepoškodovane:

• Legrand 138074 Manual Call Point (1 unit)
• Mounting Screws (quantity as supplied)
• Navodila za uporabo (ta dokument)

4. Nastavitev in namestitev

The Legrand 138074 Manual Call Point is designed for surface or flush mounting. Ensure the chosen location complies with local fire safety regulations regarding accessibility and visibility.

4.1. Montaža

1. Pripravite montažno površino: Ensure the surface is clean, dry, and flat.
2. Označite vrtalne točke: Use the call point's base as a template to mark the positions for mounting screws.
3. Vrtanje lukenj: Izvrtajte ustrezne pilotne luknje za pritrdilne vijake.
4. Zavarujte bazo: Attach the call point's base securely to the wall using the provided screws.

4.2. Ožičenje

Refer to the wiring diagram below and your fire alarm control panel's documentation for correct connection. This device features 2 contacts and an LED indicator.

• Connect the alarm circuit wires to the designated terminals (typically NO/NC contacts).
• Connect the LED indicator wires to the appropriate power source and signaling circuit as per your system's requirements.
• Prepričajte se, da so vse povezave varne in ustrezno izolirane.

Slika 2: Notranji view and wiring terminals of the Legrand 138074 Manual Call Point.

4.3. Končna montaža

1. Carefully place the front cover onto the mounted base, ensuring all wires are tucked away and not pinched.
2. Secure the cover with any retaining screws or clips provided.
3. Restore power to the circuit and test the device according to your fire alarm system's testing procedures.

5. Navodila za uporabo

In the event of a fire or other emergency requiring immediate alarm activation:

1. Locate the Call Point: Identify the nearest Legrand 138074 Manual Call Point.
2. Aktivirajte alarm: Firmly press the designated activation area on the call point. This action will typically break a frangible element or activate a switch.
3. Potrdi aktivacijo: The integrated LED indicator should illuminate, confirming that the call point has been activated and the signal sent to the fire alarm control panel.
4. Evakuiram: Follow your building's emergency evacuation procedures.

Note: Resetting the call point typically requires a special key or tool to return the activation mechanism to its original state after an alarm. Consult your fire alarm system administrator for reset procedures.

6. Vzdrževanje

Regular maintenance ensures the reliable operation of your manual call point.

• Vizualni pregled: Periodically inspect the call point for any signs of physical damage, tampering, or obstruction. Ensure the LED is functional during system tests.
• Čiščenje: Clean the exterior of the call point with a soft, damp krpo. Ne uporabljajte abrazivnih čistil ali topil.
• Funkcionalno testiranje: Conduct regular functional tests as required by local fire safety regulations and your fire alarm system's maintenance schedule. This should be performed by qualified personnel.
• Zamenjava komponente: If the frangible element is broken or the device is damaged, it must be replaced by a qualified technician.

7. Odpravljanje težav

If you encounter issues with your Legrand 138074 Manual Call Point, refer to the table below. For problems not listed, contact qualified service personnel.

8. Specifikacije

9. Informacije o garanciji

Legrand products are manufactured to high standards and are typically covered by a limited warranty against defects in materials and workmanship. The specific warranty period and terms may vary by region and product type. Please retain your proof of purchase. For detailed warranty information, refer to the official Legrand website or contact Legrand customer support in your region.

10. Podpora in stik

For technical assistance, product inquiries, or to report issues, please contact Legrand customer support. You can find contact information, including phone numbers and online support portals, on the official Legrand webspletno mesto:

www.legrand.com

Ko se obrnete na podporo, imejte pripravljeno številko modela izdelka (138074) in vse ustrezne podatke o nakupu.