Pedrollo F 50/160A Electric Centrifugal Pump User Manual

1. Izdelek je končanview

The Pedrollo F 50/160A is a robust electric centrifugal pump designed for various industrial and agricultural applications. It features a cast iron pump casing and a brass impeller, ensuring durability and efficient performance. This pump is suitable for handling clean water and is engineered for continuous operation (S1).

Key applications include water supply systems, washing installations, compressed air systems, fire protection systems, irrigation, industrial processes, and water circulation in air conditioning units.

Figure 1: Pedrollo F 50/160A Electric Centrifugal Pump. This image shows the blue-colored pump with its electric motor on the right and the pump casing with inlet/outlet flanges on the left. The robust cast iron construction is visible, along with the cooling fins on the motor.

2. Varnostne informacije

Always read and understand all safety warnings and instructions before installing, operating, or performing maintenance on the pump. Failure to do so may result in serious injury or property damage.

• Električna varnost: This pump operates on a three-phase, 400 V, 50 Hz power supply. Installation and wiring must be performed by a qualified electrician in accordance with local electrical codes and regulations. Ensure the power supply is disconnected before any installation or maintenance work.
• Pogoji delovanja: Do not operate the pump outside its specified temperature ranges. Liquid temperature should be between -10 °C and +90 °C. Ambient temperature should be between -10 °C and +40 °C.
• Tlak: The maximum pressure in the pump body is 10 bar (PN10). Do not exceed this pressure.
• Vrsta tekočine: This pump is designed for clean water only. Do not use it with flammable, corrosive, or abrasive liquids.
• Mesto namestitve: Install the pump in indoor areas or in locations protected from adverse weather conditions.
• Vzdrževanje: Always disconnect power before performing any maintenance. Allow the pump to cool down if it has been running.

3. Nastavitev in namestitev

Proper installation is crucial for the pump's performance and longevity. Consult a professional if you are unsure about any steps.

1. Montaža: Securely mount the pump on a stable, level surface using appropriate fasteners. Ensure there is adequate space around the pump for ventilation and maintenance access.
2. Cevni priključki: Connect the suction and discharge pipes to the pump's flanges. Use appropriate gaskets and ensure all connections are watertight and free from leaks. Avoid putting strain on the pump casing from misaligned pipes.
3. Električna povezava:
   • Prepričajte se, da je glavno napajanje IZKLOPLJENO.
   • Connect the three-phase (400 V, 50 Hz) power supply to the motor's terminal box according to the wiring diagram provided inside the terminal box cover.
   • Zagotovite pravilno ozemljitev črpalke.
   • Install appropriate circuit breakers and motor protection devices as required by local regulations.
4. Polnjenje: Before initial operation, the pump casing and suction line must be completely filled with the liquid to be pumped. This prevents dry running and potential damage to the pump.
5. Preverite vrtenje: Briefly switch on the pump to verify the correct direction of impeller rotation. If the rotation is incorrect, reverse two of the three phase wires.

4. Navodila za uporabo

Ko je črpalka nameščena in napolnjena, je pripravljena za delovanje.

1. Zagon: Ensure all valves in the suction and discharge lines are open. Switch on the power supply to the pump. The pump should start smoothly.
2. Spremljanje: During operation, monitor the pump for unusual noises, vibrations, or leaks. Check pressure gauges (if installed) to ensure operation within expected parameters.
3. Ugasniti: To stop the pump, switch off the power supply. If the pump will be out of service for an extended period, especially in freezing conditions, drain the pump casing and pipes to prevent damage.

5. Vzdrževanje

Regular maintenance ensures optimal performance and extends the lifespan of your Pedrollo pump.

• Rutinski pregledi: Periodically inspect the pump for any signs of wear, corrosion, or leaks. Check electrical connections for tightness and integrity.
• Čiščenje: Keep the pump and motor clean and free from dust and debris to ensure proper cooling.
• Mazanje ležajev: The motor bearings are typically sealed and lubricated for life. Refer to the motor's specific manual if lubrication is required.
• Pregled rotorja: If performance degrades, the impeller may need inspection for blockages or wear. This should be done by qualified personnel after disconnecting power and draining the pump.
• Zimovanje: In areas subject to freezing temperatures, drain the pump and piping completely to prevent ice damage.

6. Odpravljanje težav

V tem razdelku so rešitve za pogoste težave. Za zapletene težave se obrnite na usposobljeno servisno osebje.

7. Specifikacije

Detailed technical specifications for the Pedrollo F 50/160A Electric Centrifugal Pump.

• Model: Ž 50/160A
• Napajanje: Three-phase, 400 V, 50 Hz
• moč: 7.5 kW (10 Hp)
• Hitrost pretoka: 300 to 1100 liters/min
• Vodja: 27 do 37 metrov
• Suction Lift (Manometric): Do 7 metre
• Črpalka CasinMaterial: Lito železo
• Material rotorja: Medenina
• Učinkovitost motorja: IE3
• Max. Pressure in Pump Body: 10 barov (PN10)
• Temperaturno območje tekočine: -10 °C do +90 °C
• Razpon temperature okolja: -10 °C do +40 °C
• Vrsta operacije: Neprekinjeno (S1)
• Teža artikla: Približno 60 kg
• Številka dela proizvajalca: 4FN50163AE

8. Garancija in podpora

For warranty information, please refer to the documentation provided at the time of purchase or contact your authorized Pedrollo dealer. Pedrollo products are known for their quality and reliability.

For technical support, spare parts, or service inquiries, please contact your local Pedrollo distributor or the seller from whom you purchased the pump. Provide the model number (F 50/160A) and serial number (if applicable) when seeking assistance.

Informacije o prodajalcu: PratoErboso Shop (as per purchase record)

Proizvajalec: Pedrollo