Navodila za uporabo električne žage AEG SMT 355 z vrvico

Uvod

This manual provides essential instructions for the safe operation, setup, maintenance, and troubleshooting of your AEG SMT 355 Corded Electric Chop Saw. Please read this manual thoroughly before operating the tool to ensure safe and efficient use. Keep this manual for future reference.

The AEG SMT 355 is a powerful corded electric chop saw designed for cutting various materials including metal, stainless steel, and wood, with a maximum cutting depth of 115 mm.

Splošna varnostna navodila

Vedno upoštevajte osnovne varnostne ukrepe, da zmanjšate tveganje požara, električnega udara in telesnih poškodb. To vključuje, vendar ni omejeno na:

• Nosite ustrezno osebno zaščitno opremo (OZO), kot so zaščitna očala, zaščita za sluh in rokavice.
• Poskrbite, da bo delovno območje čisto, dobro osvetljeno in brez ovir.
• Otroci in navzoči ljudje naj ne bodo v bližini območja delovanja.
• Električnega orodja ne uporabljajte v eksplozivnem okolju, na primer v prisotnosti vnetljivih tekočin, plinov ali prahu.
• Pred kakršnimi koli nastavitvami, menjavo pribora ali shranjevanjem orodja vedno izključite napajalni kabel iz vira napajanja.
• Pred rezanjem trdno pritrdite obdelovanec.
• Use only cutting wheels designed for the AEG SMT 355 and suitable for the material being cut.

Sestavine izdelka

Familiarize yourself with the main components of your AEG SMT 355 chop saw.

Slika 1: Spredaj view of the AEG SMT 355 Corded Electric Chop Saw, showing the cutting wheel, guard, handle, and base.

Slika 2: Zadaj view of the AEG SMT 355 Corded Electric Chop Saw, highlighting the motor housing and power cord connection.

Slika 3: Bližnji posnetek view of the integrated vise and clamping mechanism on the AEG SMT 355, used for securing workpieces.

Postavitev in montaža

1. Razpakiranje: Carefully remove the chop saw from its packaging. Inspect for any damage that may have occurred during shipping. Report any damage to your retailer immediately.
2. Montaža: For stability and safety, it is recommended to securely mount the chop saw to a workbench or a stable stand using appropriate fasteners. Ensure the mounting surface can support the weight of the tool and the forces generated during operation.
3. Namestitev rezila (če ni predhodno nameščeno):
   • Prepričajte se, da je orodje izklopljeno iz vira napajanja.
   • Lift the blade guard.
   • Pritisnite gumb za zaklepanje vretena, da preprečite vrtenje vretena.
   • Use the provided wrench to loosen and remove the blade retaining nut and outer flange.
   • Place the new 355 mm cutting wheel onto the spindle, ensuring the rotation arrow on the blade matches the direction of rotation indicated on the saw.
   • Reinstall the outer flange and blade retaining nut. Tighten securely with the wrench while holding the spindle lock.
   • Spustite zaščito rezila.
4. Vise Adjustment: The integrated vise can be adjusted to secure various workpiece sizes. Loosen the locking handle, slide the vise jaw to the desired position, and tighten the handle firmly to secure the workpiece.

Navodila za uporabo

1. Priprava obdelovanca:
   • Prepričajte se, da je obdelovanec čist in brez ostankov.
   • Mark the cutting line clearly.
   • Place the workpiece firmly against the fence and secure it tightly with the vise mechanism. Ensure the workpiece is stable and will not shift during the cut.
2. Napajalni priključek: Connect the chop saw to a suitable power outlet (230V, 50Hz). Ensure the power circuit can handle the 2300 Watts power consumption.
3. Zagon žage:
   • Držite ročaj trdno.
   • Press the trigger switch to start the motor. Allow the blade to reach full speed (3800 RPM) before beginning the cut.
4. Izdelava reza:
   • Slowly and steadily lower the rotating blade into the workpiece. Do not force the cut; let the saw do the work.
   • Maintain a consistent downward pressure.
   • Once the cut is complete, release the trigger switch and allow the blade to stop rotating completely before raising the saw arm.
5. Ustavitev žage: Release the trigger switch. The blade will stop rotating. Wait until the blade has completely stopped before moving the workpiece or making any adjustments.

Vzdrževanje

Redno vzdrževanje zagotavlja dolgo življenjsko dobo in varno delovanje vaše žage.

• Čiščenje: After each use, disconnect the power and clean the saw. Remove dust, chips, and debris from the motor vents, blade guard, and base using a brush or compressed air. Do not use solvents that could damage plastic parts.
• Pregled rezila: Regularly inspect the cutting wheel for wear, cracks, or damage. Replace worn or damaged blades immediately. Ensure the blade is always sharp and suitable for the material being cut.
• Vise and Clamp: Keep the vise mechanism clean and lubricated to ensure smooth operation.
• Napajalni kabel: Inspect the power cord for any signs of damage, cuts, or fraying. If damaged, have it repaired by a qualified technician.
• Ogljikove ščetke: The motor's carbon brushes may need periodic inspection and replacement. Refer to a qualified service center for this procedure if you notice reduced power or excessive sparking.
• Shranjevanje: Store the chop saw in a dry, secure location out of reach of children and unauthorized users.

Odpravljanje težav

Ta razdelek obravnava pogoste težave, na katere lahko naletite. Za težave, ki niso navedene tukaj, se obrnite na usposobljenega serviserja.

Tehnične specifikacije

Garancija in podpora

Specific warranty terms and conditions for the AEG SMT 355 Corded Electric Chop Saw are typically provided with the product at the time of purchase or can be found on the official AEG website for your region. Please retain your proof of purchase for warranty claims.

For technical support, service, or spare parts, please refer to the contact information provided by your retailer or visit the official AEG website for authorized service centers in your area. This manual does not contain specific contact details for support.