Sauter SPI4362B Induction Hob User Manual

1. Uvod

Thank you for choosing the Sauter SPI4362B Induction Hob. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new appliance. Please read these instructions carefully before use and keep them for future reference.

2. Varnostne informacije

Da preprečite telesne poškodbe ali poškodbe naprave, upoštevajte naslednje varnostne ukrepe:

• Poskrbite, da bo napravo namestil usposobljen tehnik v skladu z lokalnimi predpisi.
• Do not operate the hob if the ceramic glass surface is cracked or broken. Disconnect from power immediately.
• Keep children away from the appliance during operation and when it is cooling down. Residual heat can cause burns.
• Uporabljajte samo posodo, primerno za indukcijo.
• Avoid placing metallic objects (e.g., cutlery, lids) on the hob surface as they can heat up.
• Do not store flammable materials near or on the hob.
• Always switch off the cooking zones after use.
• Do not clean the hob with steam cleaners or high-pressure cleaning equipment.

3. Izdelek je končanview

The Sauter SPI4362B is a 3-zone induction hob designed for built-in installation. It features a black ceramic glass surface and touch controls for precise cooking.

Ključne značilnosti:

• 3 indukcijske kuhalne cone: Includes a large 28 cm zone with up to 5000W power, and two smaller zones (16 cm and 21 cm).
• Skupna moč 7200 W: Provides efficient and rapid heating.
• EasyCook Function: Identifies the ideal cooking zone based on cookware diameter, optimizing energy use and heating time.
• Natančen nadzor: Each zone offers 14 cooking positions for fine temperature adjustment.
• 3 Direct Access Shortcuts: Including a Booster function for maximum power. These shortcuts are programmable.
• Centralized Lock: For enhanced safety, preventing accidental changes to settings.
• Indikator preostale toplote: Displays 'H' to warn when a zone is still hot.
• Container Detection: Automatically detects the presence of suitable cookware.

Režija view of the Sauter SPI4362B induction hob, black ceramic glass, with a stainless steel pan containing chopped vegetables (zucchini, carrots, bell peppers, onions) being stirred by a wooden spoon. The hob features two active cooking zones with illuminated outlines and touch controls visible at the front.

4. Nastavitev in namestitev

Installation of the Sauter SPI4362B induction hob should only be performed by a qualified electrician or authorized service technician.

Zahteve za namestitev:

• Mere izreza: 560 mm (width) x 490 mm (depth).
• Električna povezava: The hob requires a dedicated electrical circuit.
• Napajanje: 220-240V, 50/60Hz.
• Največja moč: 7.2 kW.
• Current Intensity: 32 A.
• Dolžina kabla: 130 cm (supplied without a plug).
• Zagotovite zadostno prezračevanje okoli naprave.

Refer to the detailed installation diagram provided in the separate installation guide for precise measurements and clearances.

5. Navodila za uporabo

5.1. Vklop/izklop

• To turn on: Press the main power button. The display will show '0' for each zone.
• To turn off: Press the main power button again.

5.2. Izbira kuhalnega polja in nastavitev moči

• Na želeno kuhalno polje postavite ponev, združljivo z indukcijo.
• Select the zone by touching its corresponding control.
• Adjust the power level using the '+' and '-' controls or by selecting one of the 14 available positions.
• Uporabite Ojačevalec shortcut for rapid heating.

5.3. EasyCook Function

The EasyCook function (indicated by an Eco label) helps identify the most suitable cooking zone for your cookware. When activated, it guides you to the optimal zone, contributing to faster temperature achievement and energy savings.

5.4. Centralized Lock

Activate the centralized lock function to prevent accidental changes to settings, especially useful when cleaning the hob or to prevent children from operating it. Refer to the control panel for the specific lock button.

5.5. Indikator preostale toplote

After a cooking zone is switched off, an 'H' will appear on the display if the zone is still hot enough to cause burns. Do not touch the surface until the 'H' disappears.

5.6. Container Detection

The hob automatically detects if a suitable pan is placed on the cooking zone. If no pan is detected or if the pan is unsuitable, the hob will not activate or will switch off after a short period.

6. Vzdrževanje in čiščenje

Regular cleaning helps maintain the appearance and performance of your induction hob.

• Always ensure the hob is switched off and cool before cleaning.
• For light soiling, wipe the ceramic glass surface with a damp krpo in blagim detergentom.
• For stubborn stains or burnt-on food, use a specialized ceramic hob cleaner and a scraper designed for glass surfaces.
• Izogibajte se abrazivnim čistilom, grobim gobicam ali agresivnim kemikalijam, saj lahko opraskajo ali poškodujejo površino.
• Očistite nadzorno ploščo z mehko damp cloth. Ensure no moisture enters the controls.

7. Odpravljanje težav

If you encounter issues with your hob, refer to the following common problems and solutions:

For issues not listed here or if problems persist, contact Sauter customer support or a qualified service technician.

8. Specifikacije

9. Informacije o garanciji

Sauter provides a commitment to quality for its products. Spare parts for the SPI4362B model are available for a period of 2 years from the date of purchase. For specific warranty terms and conditions, please refer to the warranty card included with your product or contact Sauter customer service.

10. Podpora in stik

For technical assistance, service requests, or further information regarding your Sauter SPI4362B Induction Hob, please contact Sauter customer support. Contact details can typically be found on the Sauter official webmestu ali v dokumentaciji izdelka.

When contacting support, please have your model number (SPI4362B) and purchase date readily available.