Navodila za uporabo filtrirne enote za peščeni bazen GAME SandPRO serije 50D

Uvod

This manual provides essential information for the safe and efficient operation and maintenance of your GAME SandPRO 50D Series Pool Sand Filter Unit. This high-performance filtration system is designed for above-ground pools, offering energy-efficient water circulation and superior filtration. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of your unit.

Image: The GAME SandPRO 50D Series Pool Sand Filter Unit, showcasing its compact design and main components including the sand tank, pump, and multi-port valve.

Varnostne informacije

OPOZORILO: Ta izdelek vsebuje kemikalije, za katere je v zvezni državi Kalifornija znano, da povzročajo raka in prirojene okvare ali druge reproduktivne poškodbe. Za več informacij obiščite www.p65warnings.ca.gov.

Always follow basic safety precautions when installing and operating this electrical equipment. Refer to the official Safety Information PDF document for comprehensive safety guidelines.

• Ensure the unit is installed on a solid, level surface.
• Do not operate the pump if the ground is wet or if you are standing in water.
• Pred kakršnim koli vzdrževanjem ali servisiranjem vedno izklopite napajanje.
• Med delovanjem naj se otroci in nepooblaščene osebe ne približujejo enoti.
• Ensure all electrical connections are properly grounded and protected by a Ground-Fault Circuit Interrupter (GFCI).

Nastavitev in namestitev

Proper setup is crucial for the optimal performance of your SandPRO 50D filter unit. Follow these steps carefully:

1. Umestitev: Position the filter unit on a stable, level surface near your above-ground pool. Ensure adequate drainage and protection from direct weather exposure if possible.
2. Polnjenje s peskom: The SandPRO 50D requires 50 pounds of medium-grade pool filtering sand, also known as #20 silica sand. Do not use regular sand or other filtering media unless specified by the manufacturer. Carefully pour the sand into the filter tank, ensuring the standpipe is centered.

Image: A person adding 50 pounds of #20 silica sand into the filter tank, illustrating the sand filling process.
3. Namestitev večpotnega ventila: Securely attach the multi-port valve to the top of the sand tank. Ensure the O-ring is properly seated and the clamp is tightened evenly.
4. Priključki cevi: Connect the hoses from your pool to the appropriate ports on the multi-port valve and pump. The unit includes adapters for Intex pools (32 mm, 40 mm, 1-1/4-in, & 1-1/2-in hose fittings). Ensure all hose clamps are tightened securely to prevent leaks, but avoid over-tightening which can damage fittings.


Image: The SandPRO 50D filter unit connected to an above-ground pool, demonstrating the typical setup with hoses.

5. Električna povezava: Connect the pump to a properly grounded electrical outlet protected by a GFCI.

For detailed diagrams and step-by-step instructions, please refer to the comprehensive User Guide (PDF) provided by the manufacturer.

Navodila za uporabo

The SandPRO 50D features an easy-to-operate 4-position rotary valve for various functions:

Slika: Podrobna view of the multi-port valve with its 4-way handle, the integrated pressure gauge, and the transparent lid of the strainer basket.

• FILTER: This is the standard operating mode for daily filtration. Water is pumped through the sand bed, trapping debris, and returned to the pool.
• POVRATNO PRANJE: Used to clean the sand filter. Water flow is reversed, flushing trapped debris out through the waste port. Perform backwash when the pressure gauge reading increases by 5-10 PSI above its clean operating pressure.
• IZPIRANJE: After backwashing, this mode settles the sand bed and flushes any remaining dirty water to waste before returning to FILTER mode.
• PREZIMITEV: Prepares the filter for off-season storage. Consult the user guide for specific winterization procedures.

The integrated pressure gauge allows you to monitor the filter's performance. A rising pressure indicates that the filter media is becoming clogged and requires backwashing.

Vzdrževanje

Regular maintenance ensures the longevity and efficiency of your SandPRO 50D filter unit:

• Cedilna košara: Periodically check and clean the large-capacity easy-to-clean hair & debris strainer basket. The see-through lid allows for easy inspection. Turn off the pump before opening the basket.
• Backwashing & Rinsing: Perform backwashing and rinsing as needed, typically when the pressure gauge indicates a 5-10 PSI increase from its clean operating pressure.
• Zamenjava peska: The #20 silica sand typically needs replacement every 3-5 years, depending on usage and water quality. Refer to the user guide for instructions on replacing the sand.

Odpravljanje težav

If you encounter issues with your SandPRO 50D, consider the following common troubleshooting tips:

For more complex issues or if troubleshooting steps do not resolve the problem, refer to the detailed troubleshooting section in the official User Guide (PDF).

Specifikacije

• Model: 4710-BB
• Moč črpalke: 0.5 KM
• Maximum Pool Capacity: Do 10,000 litrov
• Hitrost pretoka: 40 GPM (galone na minuto)
• Sand Requirement: 50 lbs of #20 Silica Sand (not included)
• Dimenzije izdelka: 17.64 x 17.77 x 24.82 palcev
• Teža artikla: 21 funtov
• Proizvajalec: IGRA

Garancija in podpora

For warranty information, technical support, or to inquire about replacement parts, please contact GAME customer service. Replacement parts for SandPRO filters are exclusively available through GAME.

You can also refer to the official User Guide (PDF) for additional information: Uporabniški priročnik (PDF)