AMS F5962

AMS F5962 Navodila za uporabo radijsko vodene stenske ure

Model: F5962

1. Uvod

Thank you for choosing the AMS F5962 Radio-Controlled Wall Clock. This manual provides essential information for the proper setup, operation, and maintenance of your new clock. Please read these instructions carefully before use and retain them for future reference.

2. Izdelek je končanview

The AMS F5962 is a radio-controlled wall clock featuring an antique-style beige dial with dark brown Arabic numerals. Its painted metal housing ensures durability, and the radio-controlled movement provides accurate timekeeping by automatically synchronizing with a time signal.

AMS F5962 Radio-Controlled Wall Clock front view

Slika 1: Spredaj view of the AMS F5962 Radio-Controlled Wall Clock, showcasing its antique-style beige dial and dark brown Arabic numerals.

3. Vsebina paketa

Po razpakiranju preverite vsebino paketa. Prepričajte se, da so vsi predmeti prisotni in nepoškodovani.

4. Nastavitev

4.1 Namestitev baterije

  1. Poiščite predal za baterije na zadnji strani ure.
  2. Insert one AA (or specified type) battery, ensuring the correct polarity (+/-) as indicated inside the compartment.
  3. Trdno zaprite pokrov prostora za baterije.

Pomembno: Use only the recommended battery type. Remove depleted batteries promptly to prevent leakage.

4.2 Začetna časovna sinhronizacija

After battery installation, the clock will automatically attempt to receive the radio time signal.

  1. Uro postavite blizu okna ali na odprt prostor, stran od elektronskih naprav, ki bi lahko povzročale motnje.
  2. The hands will typically move to the 12 o'clock position and then begin searching for the signal.
  3. This process can take several minutes to several hours, depending on signal strength and location. Once the signal is received, the clock will automatically set itself to the correct time.

Opomba: If the clock does not set itself after a few hours, try repositioning it or manually initiating a signal search if your model has that feature (refer to troubleshooting).

4.3 Montaža ure

The AMS F5962 is designed for indoor wall mounting.

  1. Choose a suitable location on an indoor wall, ensuring it is sturdy enough to support the clock's weight (approximately 1.22 kg).
  2. Install a nail or wall anchor with a screw, ensuring it protrudes sufficiently (at least 2 cm) to securely hold the clock.
  3. Hang the clock using the hanging mechanism on the back.
AMS F5962 Wall Clock with dimensions

Figure 2: The AMS F5962 Wall Clock showing its approximate dimensions of 32cm diameter. The overall product dimensions are 35.4 x 35.2 x 7.4 cm.

5. Navodila za uporabo

Once set up, the AMS F5962 operates automatically.

6. Vzdrževanje

6.1 Čiščenje

Za čiščenje ure površino nežno obrišite z mehko, suho krpo. Ne uporabljajte abrazivnih čistil, topil ali kemičnih razpršil, saj lahko poškodujejo površino ali notranje komponente.

6.2 Zamenjava baterije

Ko se kazalci ure prenehajo premikati ali čas postane netočen, je verjetno čas za zamenjavo baterije.

  1. Odstranite staro baterijo iz predala.
  2. Insert a new, fresh battery of the correct type (e.g., AA), observing polarity.
  3. The clock will then attempt to re-synchronize with the radio signal as described in Section 4.2.

Okoljska opomba: Please dispose of used batteries responsibly according to local regulations.

7. Odpravljanje težav

TežavaMožen vzrokrešitev
Clock hands do not move or stop.Izpraznjena baterija.Zamenjajte baterijo s svežo.
Clock does not set to the correct time.
  • Weak or no radio signal.
  • Motnje druge elektronike.
  • Incorrect time zone setting (if applicable, though this model is typically automatic).
  • Move the clock to a different location, preferably near a window and away from electronic devices.
  • Allow several hours for the clock to receive the signal.
  • Ensure the battery is fresh.
Time is incorrect after DST change.Clock did not receive the DST signal.
  • The clock should automatically adjust. If not, try removing the battery for a few minutes and reinserting it to force a re-synchronization.
  • Ensure the clock is in a location with good signal reception.

8. Specifikacije

ZnamkaAMS
Številka modelaF5962
Vrsta zaslonaAnalogno
Posebna funkcijaRadio-Controlled Time Synchronization
MaterialBarvana kovina
barvaBeige (dial), Brown (housing)
SlogStarinsko
Dimenzije izdelka35.4 x 35.2 x 7.4 cm (Overall); Case diameter 32cm
Teža predmeta1.22 kg
Vir napajanjaNapajanje na baterije
Notranja/zunanja uporabaNotranja

9. Garancija in podpora

For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer. You may also visit the official AMS webstran za nadaljnjo pomoč.

Povezani dokumenti - F5962

Prejview AMS 5898 / 5893 Radio-Controlled Clock User Manual
Detailed instructions for setting up and operating the AMS 5898 and AMS 5893 radio-controlled clocks, including time setting, alarm functions, temperature display, and maintenance.
Prejview AMS Wall Clock Operating Instructions
Operating instructions for AMS wall clocks, covering battery installation, replacement, and general usage in multiple languages.
Prejview Priročnik za komplet za evalacijo adapterske plošče ams AS5600L
Ta priročnik vsebuje obsežne informacije o adapterski plošči ams AS5600L-WL_EK_AB, vključno z vsebino kompleta, opisom plošče, navodili za montažo, podrobnostmi o razporeditvi pinov, delovanjem v načinu I2C, shemami strojne opreme, postavitvijo tiskanega vezja in informacijami za naročanje.
Prejview ams AS5048 14-bit Rotary Position Sensor User Manual
This user manual provides detailed information on the ams AS5048, a 14-bit rotary position sensor with digital angle and PWM output. It covers the AS5048 adapter board, mounting, pinout, operation cases (SPI, Daisy Chain), firmware coding examples, and hardware schematics. Essential for engineers integrating this sensor into their systems.
Prejview Priročnik za komplet za ocenjevanje adapterske plošče ams AS5048
Ta priročnik podrobno opisuje adaptersko ploščo ams AS5048 (AS5048-EK-AB), komplet za ocenjevanje magnetnega senzorja položaja AS5048. Zajema strojno opremo, načine delovanja (SPI, I2C), programsko opremo, npr.amples, and contact information for ams AG.
Prejview ams AS5048 Adapter Board Evaluation Kit Manual | AS5048-EK-AB
Explore the ams AS5048 Adapter Board (AS5048-EK-AB), an evaluation kit for the AS5048 magnetic position sensor. This manual provides essential details on features, SPI/I2C interfaces, hardware, and software examples for efficient engineering development.