1. Pomembne varnostne informacije
Please read and understand all instructions before attempting to assemble, install, or operate this product. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause injury or property damage.
- OPOZORILO: Risk of electric shock. Disconnect power at the main circuit breaker or fuse box before installation or any maintenance.
- Če niste prepričani o postopku namestitve, se posvetujte s kvalificiranim električarjem.
- Ensure all electrical connections are made in accordance with local codes, ordinances, and the National Electric Code (NEC).
- Ne poskušajte spreminjati svetilke ali njenih komponent.
- Handle the fixture with care to avoid damage to the LED components or glass shades.
2. Vsebina paketa
Pred začetkom namestitve preverite, ali so vse komponente prisotne in nepoškodovane. Če kateri koli deli manjkajo ali so poškodovani, ne nadaljujte z namestitvijo in se obrnite na podporo strankam.
- Pendant Fixture Assembly (9-light LED pendant)
- Mounting Hardware Kit (crossbar, mounting screws, wire nuts)
- Navodila za uporabo (ta dokument)
3. Nastavitev in namestitev
3.1 Potrebno orodje (ni vključeno)
- Phillips izvijač za glavo
- Ravni izvijač
- Odstranjevalci žice
- Električni trak
- Lestev
- Zaščitna očala
3.2 koraki namestitve
- Izklopite napajanje: Preden začnete, se prepričajte, da je napajanje razvodne omarice izklopljeno z odklopnikom.
- Priprava montaže: Pritrdite montažno prečko na razvodno omarico s priloženimi vijaki. Prepričajte se, da je varno pritrjena.
- Prilagodi višino obeska: The individual pendants can be adjusted to your desired hanging height. Carefully feed the suspension wires through the canopy until the desired length is achieved for each light. Secure the wires according to the specific mechanism on the fixture.
- Žične povezave: Connect the fixture's wires to the corresponding wires from the junction box. Use the provided wire nuts.
- Črno žico iz svetilke priključite na črno (vroči) žico iz razvodne omarice.
- Belo žico iz svetilke priključite na belo (nevtralno) žico iz razvodne omarice.
- Connect the bare copper or green ground wire from the fixture to the ground wire from the junction box (or to the mounting crossbar if no ground wire is present).
- Nadstrešek gore: Carefully tuck all wires into the junction box. Align the fixture canopy with the mounting crossbar and secure it with the canopy screws.
- Obnovi moč: Ko je svetilka varno nameščena, ponovno vzpostavite napajanje na odklopniku.
Image 3.2.1: Fully assembled ET2 Hilite Large Pendant (Model E21169-01BZ) showing the overall design and multiple lights.
Image 3.2.2: Dimensional drawing of the ET2 Hilite Large Pendant, indicating overall height and width for installation planning.
4. Navodila za uporabo
The ET2 Hilite Large Pendant is designed for simple operation via a standard wall switch.
- Vklop/izklop: Use the wall switch connected to the fixture's circuit to turn the pendant lights on or off.
- LED tehnologija: This fixture utilizes integrated LED technology for energy efficiency and long lifespan. No traditional bulbs need to be replaced.
- Nadzor aplikacij: While the fixture itself does not have integrated app control, it is compatible with most standard smart home lighting systems and dimmer switches that support LED fixtures. Consult your smart home system's instructions for integration.
5. Vzdrževanje
Proper care and maintenance will ensure the longevity and appearance of your pendant light.
- Čiščenje: To clean the fixture, ensure power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or LED components.
- Brez delov, ki bi jih lahko servisiral uporabnik: The LED components are integrated and not designed for user replacement. Do not attempt to disassemble the LED modules.
- Pregled: Občasno preverite tesnost vseh priključkov in pritrdilnih elementov.
6. Odpravljanje težav
Če imate težave z visečo svetilko, si oglejte naslednje pogoste korake za odpravljanje težav:
- Luč se ne prižge:
- Preverite, ali je napajanje na odklopniku vklopljeno.
- Prepričajte se, da je stensko stikalo v položaju »VKLOP«.
- Verify that all wiring connections are secure (ensure power is off before checking).
- Utripanje luči:
- Ensure all wiring connections are secure. Loose connections can cause flickering.
- If using a dimmer switch, ensure it is compatible with LED lighting. Incompatible dimmers can cause flickering or damage to the LEDs.
- Zatemnjena svetlobna moč:
- If using a dimmer, ensure it is set to the maximum brightness.
- Verify the fixture is receiving the correct voltage (120 V).
Če ti koraki ne odpravijo težave, se obrnite na usposobljenega električarja ali podporo strankam ET2.
7. Specifikacije
| Funkcija | Podrobnost |
|---|---|
| Znamka | ET2 |
| Številka modela | E21169-01BZ |
| barva | bron |
| Material | Kovina (svetilka), steklo (senčnik) |
| Slog | Moderno |
| Oblika svetilke | Obesek |
| Dimenzije izdelka | 23.5 cm D x 23.5 cm Š x 5.75 cm V |
| Vir napajanja | Električni na kabel |
| Število svetlobnih virov | 9 |
| voltage | 120 volta |
| Wattage (Skupaj) | 64.8 Watts (9 lights x 7.2W each) |
| Vrsta namestitve | Stropni nosilec |
| Zahtevana montaža | ja |
| Teža predmeta | 15.84 funtov |
8. Garancija in podpora
8.1 Informacije o garanciji
This ET2 Hilite Large Pendant (Model E21169-01BZ) is covered by a 1-letna garancija proizvajalca od datuma nakupa. Ta garancija krije napake v materialu in izdelavi pri normalni uporabi. Ne krije škode, ki nastane zaradi nepravilne namestitve, nesreče, napačne uporabe, zlorabe ali nepooblaščenih sprememb.
8.2 Podpora strankam
For technical assistance, warranty claims, or to report missing/damaged parts, please contact ET2 customer support. Refer to the original packaging or the ET2 official webspletno mesto za trenutne kontaktne podatke.
