1. Uvod
The Geemarc EASY TV 10 is a universal remote control designed for simplicity and ease of use. It features 20 large, programmable buttons, making it suitable for individuals who prefer a straightforward interface for their television. This remote control is ideal for users who find standard remote controls with numerous buttons confusing or difficult to operate due to visual or tactile impairments.
This manual provides comprehensive instructions on how to set up, program, and operate your Geemarc EASY TV 10 remote control.
2. Varnostne informacije
- Keep the remote control away from water and moisture.
- Daljinskega upravljalnika ne izpostavljajte ekstremnim temperaturam ali neposredni sončni svetlobi.
- Pazite, da vam daljinski upravljalnik ne pade ali da ga ne izpostavljate močnim udarcem.
- Do not attempt to disassemble or repair the remote control yourself. Contact qualified personnel for service.
- Baterije odvrzite odgovorno v skladu z lokalnimi predpisi.
3. Vsebina paketa
- 1 x Geemarc EASY TV 10 Universal Remote Control
- 1 x Uporabniški priročnik (ta dokument)
Opomba: Potrebne so baterije AAA, ki niso priložene paketu.
4. Izdelek je končanview
The Geemarc EASY TV 10 remote control features a simplified layout with large, clearly labeled buttons for essential TV functions.
Slika 1: Spredaj view of the Geemarc EASY TV 10 Universal Remote Control, showcasing its simplified layout with large, clearly labeled buttons for power, AV input, A/B modes, volume control, channel navigation, and number keys 0-9, along with a dash button and a recall button.
Slika 2: Angled perspective of the Geemarc EASY TV 10 Universal Remote Control, illustrating its ergonomic shape and the prominent, easy-to-read nature of its buttons.
Slika 3: Stranski profesionalecfile view of the Geemarc EASY TV 10 Universal Remote Control, providing a clearer understanding of its thickness and overall physical design.
Funkcije gumbov:
- Gumb za vklop (rdeč): Vklopi ali izklopi TV.
- Gumb AV: Switches between video input sources (e.g., TV, HDMI, AV).
- A / B Buttons: Mode selection buttons for programming different devices or sets of functions.
- Glasnost +/-: Prilagodi glasnost zvoka.
- Kanal gor/dol: Menjava televizijskih kanalov.
- Številske tipke (0-9): Neposredna izbira kanalov.
- -/-- Button: Used for two-digit channel numbers or other programmable functions.
- Loop/Recall Button: Typically used for recalling the previous channel or other programmable functions.
5. Nastavitev
5.1. Namestitev baterije
- Poiščite predal za baterije na zadnji strani daljinskega upravljalnika.
- Odprite pokrov baterije.
- Insert 2 x AAA (LR03, 1.5V) batteries, ensuring correct polarity (+ and -).
- Varno zaprite pokrov baterije.
5.2. Programming the Remote Control (Learning Function)
The Geemarc EASY TV 10 is a "learning" remote control. This means it learns commands directly from your original TV remote control. You must have a functional original remote control to program the EASY TV 10.
Pomembno: Ensure both remote controls have fresh batteries and are pointed directly at each other during the programming process, ideally within 1-3 cm distance.
- Vstopite v način učenja: Press and hold the desired mode button (A or B) on the Geemarc remote simultaneously with the Channel Down (V) button for approximately 3 seconds. The red indicator light on the Geemarc remote will illuminate brightly and then start blinking slowly, indicating it is ready to learn.
- Select Button to Program: Press the button on the Geemarc remote that you wish to program (e.g., the Power button). The red indicator light will blink rapidly, waiting for a signal.
- Transmit Signal from Original Remote: Point your original TV remote control directly at the Geemarc remote's infrared sensor (usually at the top). Press and hold the corresponding button on your original remote (e.g., the Power button).
- Potrditev: The red indicator light on the Geemarc remote will blink quickly three times and then remain steadily lit if the learning was successful. This indicates the command has been learned.
- Program More Buttons: Repeat steps 2-4 for all other buttons you wish to program (Volume +/-, Channel Up/Down, Number keys, AV, etc.).
- Izhod iz načina učenja: Once all desired buttons are programmed, press the A or B button again on the Geemarc remote to exit learning mode. The red indicator light will turn off.
Nasvet: If a button does not program correctly, the indicator light may not blink three times. Repeat the process for that specific button. Some users find it helpful to program both the 'A' and 'B' modes with the same TV functions to avoid confusion if one mode is accidentally selected.
6. Upravljanje daljinskega upravljalnika
After successful programming, the Geemarc EASY TV 10 remote control is ready for use.
- Point the remote control directly at your television.
- Press the programmed buttons to control your TV functions (e.g., Power, Volume, Channel).
- If you programmed different devices or functions to modes A and B, select the appropriate mode before pressing the function buttons.
7. Vzdrževanje
7.1. Čiščenje
Daljinski upravljalnik obrišite z mehko, suho krpo. Ne uporabljajte abrazivnih čistil ali topil.
7.2. Zamenjava baterije
Replace batteries when the remote control's performance diminishes or if the indicator light does not respond as expected. Follow the battery installation steps in Section 5.1.
8. Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Remote control does not work after programming. | Incorrect programming; low batteries in either remote; original remote not transmitting properly. | Ensure fresh batteries are installed. Repeat the programming steps carefully, ensuring both remotes are aligned and signals are transmitted correctly. |
| Indicator light does not blink three times during programming. | Signal not received or weak signal. | Adjust the distance and angle between the two remotes. Ensure no obstructions. Try again. |
| Remote works for some functions but not others. | Specific buttons were not programmed or programmed incorrectly. | Re-enter learning mode and reprogram the non-functional buttons. |
| Remote suddenly stops working. | Low batteries; accidental mode change (A/B). | Replace batteries. Check if the correct mode (A or B) is selected. |
9. Specifikacije
- Znamka: Geemarc
- Model: EASY TV 10 (EASY-TV-10_BLK)
- Število programirljivih gumbov: 20
- Združljive naprave: televizija
- Tehnologija povezljivosti: Infrardeči (IR)
- vir energije: 2 x AAA baterije (niso priložene)
- Dimenzije: Približno 28 x 8 x 2 cm
- Teža artikla: Približno 63.5 gramov
- Največji obseg: 10 metrov
- Posebna lastnost: Univerzalna, učna funkcija
10. Garancija in podpora
Geemarc products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your purchase or visit the official Geemarc webmesto.
For technical support, troubleshooting assistance, or inquiries regarding your Geemarc EASY TV 10 remote control, please contact Geemarc customer service through their official channels. Contact details can typically be found on the product packaging or the Geemarc webmesto.
