Pontec 40277

Pontec PondoSolar 150 Solar Power System

Model: 40277

Uvod

The Pontec PondoSolar 150 is a self-contained solar-powered water feature system designed for use in ponds, bird baths, or other water features where a power connection is not available. This system utilizes solar energy to operate a pump, creating attractive fountain displays with various nozzle attachments.

Varnostne informacije

Vsebina paketa

Pred začetkom namestitve preverite, ali so vse komponente prisotne in nepoškodovane.

PondoSolar 150 system components laid out

Image: All components of the Pontec PondoSolar 150 system, including the solar panel, water pump, ground stake, and various fountain nozzle attachments.

Nastavitev

  1. Namestitev sončne plošče:

    Choose a location for the solar panel that receives direct sunlight for the majority of the day. Avoid shaded areas from trees, buildings, or other obstructions. The ground stake can be used to position the panel at an optimal angle towards the sun.

    PondoSolar 150 solar panel and pump connected

    Image: The solar panel connected to the water pump via a long cable, ready for installation.

  2. Priključitev črpalke:

    Connect the cable from the solar panel to the water pump. Ensure the connection is secure and fully inserted. The 5-meter cable provides flexibility for placement.

  3. Pritrditev šob:

    Select one of the four provided nozzle attachments based on your desired water spray pattern. Securely attach it to the top of the pump's outlet. Experiment with different nozzles to find the preferred effect.

  4. Submerging the Pump:

    Place the pump fully submerged in your pond or water feature. Ensure it rests on a stable, level surface to prevent it from tipping over. The pump is designed to operate underwater.

    PondoSolar 150 fountain operating in a pond

    Image: The PondoSolar 150 pump creating a fountain effect in a natural pond setting, surrounded by aquatic plants.

Navodila za uporabo

The PondoSolar 150 system operates automatically when the solar panel receives sufficient direct sunlight. There is no on/off switch or battery storage; the pump will only run when the solar panel generates enough power.

Vzdrževanje

Regular maintenance will ensure the longevity and optimal performance of your PondoSolar 150 system.

Odpravljanje težav

TežavaMožen vzrokrešitev
Črpalka ne deluje ali pa je pretok šibek.
  • Premalo neposredne sončne svetlobe.
  • Solarna plošča je umazana.
  • Pump intake or impeller is clogged.
  • Pump is not fully submerged.
  • Premaknite sončno celico na bolj sončno mesto.
  • Očistite površino solarne plošče.
  • Clean the pump's intake and impeller.
  • Ensure pump is fully submerged in water.
Fountain pattern is uneven or sputtering.
  • Nozzle is partially clogged.
  • Pump is not stable.
  • Clean the nozzle attachment.
  • Ensure the pump is on a flat, stable surface.
System does not work after storage.
  • Components not properly cleaned before storage.
  • Damage during storage (e.g., frost damage).
  • Temeljito očistite vse komponente.
  • Inspect for visible damage. If damaged, contact support.

Specifikacije

Garancija in podpora

The Pontec PondoSolar 150 comes with a 2-letna garancija od datuma nakupa, ki krije proizvodne napake. Prosimo, shranite dokazilo o nakupu za uveljavljanje garancije.

For technical support, spare parts, or warranty inquiries, please visit the official Pontec webali se obrnite na njihov oddelek za pomoč uporabnikom.

Uradno Webspletno mesto: www.pontec.com

For information regarding recycling and disposal of packaging and the product, please refer to local regulations and the markings on the product packaging.

Recycling symbols and barcode for Pontec PondoSolar 150

Image: Packaging symbols indicating recycling information for paper and general waste separation, along with the product's GTIN barcode.