1. Uvod
This manual provides essential information for the safe and correct installation, operation, and maintenance of your DB Electrical 410-44135 Starter. Please read these instructions thoroughly before attempting any installation or service. Retain this manual for future reference.
2. Varnostne informacije
Vedno upoštevajte naslednje varnostne ukrepe, da preprečite poškodbe ali škodo:
- Disconnect the vehicle's battery before beginning any work on the electrical system to prevent electrical shock or short circuits.
- Nosite ustrezno osebno zaščitno opremo (OZO), vključno z zaščitnimi očali in rokavicami.
- V primeru dvigovanja se prepričajte, da je vozilo na stabilni, ravni površini in pravilno podprto.
- Za posebne postopke in specifikacije navora glejte servisni priročnik vašega vozila.
- Otroci in nepooblaščeno osebje naj ne bodo v bližini delovnega območja.
- Ta izdelek vsebuje kemikalije, za katere je v zvezni državi Kalifornija znano, da povzročajo raka in prirojene okvare ali druge reproduktivne poškodbe (opozorilo Predloga 65). Ravnajte previdno in si po uporabi umijte roke.
3. Izdelek je končanview
The DB Electrical 410-44135 is an aftermarket starter designed to meet OEM specifications for various applications. It is a 12-volt, 9-tooth, 1.2 KW Direct Drive (DD) starter with clockwise rotation.
3.1. Ključne komponente
- Solenoid: Engages the starter drive and supplies power to the motor.
- Motor: Provides rotational force to crank the engine.
- Drive Gear (Pinion): Engages with the engine's flywheel to start the engine.
- Pritrdilna prirobnica: Secures the starter to the engine block.
3.2 Vizualna referenca
Slika 1: stran view of the DB Electrical 410-44135 Starter, showing the solenoid, motor, and mounting points.
Slika 2: Pod kotom view of the starter, highlighting the electrical terminals and rear casing.
4. Združljivost
This starter is compatible with the following vehicle models. Always verify the part fits your specific application before installation.
- Atlas: 404 (1995-1999)
- Ford: 1310 (1983-1986), 1510 (1983-1986), CL25 (1983-1986)
- New Holland: 1310 (1983-1986), 1510 (1983-1986), CL25 (1983-1986)
Replaces OEM Numbers:
- API Marine: 17031
- Arrowhead: SHI0101, 243-12120, S114-381N
- Cargo: 110552
- Ford: SBA18508-6321
- Hitachi: S114-381
- Ishikawajima: 18508-6321
- J & N: 410-44135
- JCB: 02/630500
- Lester: 17300
- New Holland: SBA18508-6321
- O&K (Orenstein & Koppel): 1447724
- ONAN: 185-2166
- PEL JOB: E185086321
- Perkins: 185086321
- Schaeff INC: 5568656721, 5999999561
- Weidemann: 5747001132, 5747001133, 5747086321
- Zeppelin: 9SX9766
5. Namestitev
Installation of the starter requires mechanical aptitude and basic tools. If you are unsure about any step, consult a qualified mechanic.
- Pripravite vozilo:
- Prepričajte se, da je vozilo izklopljeno in da je parkirna zavora zategnjena.
- Disconnect the negative (-) battery cable first, then the positive (+) battery cable.
- If necessary, lift the vehicle using a jack and secure it with jack stands.
- Locate the Old Starter: Identify the existing starter motor on your vehicle. It is typically mounted to the engine block near the transmission.
- Odklopite ožičenje:
- Carefully disconnect the main battery cable from the starter solenoid terminal.
- Disconnect the smaller ignition switch wire from the solenoid. Note the position of each wire for correct reinstallation.
- Odstranite pritrdilne vijake: Remove the bolts securing the old starter to the engine block. Support the starter as you remove the last bolt to prevent it from falling.
- Odstranite stari zaganjalnik: Carefully maneuver and remove the old starter from its mounting location.
- Namestitev novega zaganjalnika:
- Position the new DB Electrical 410-44135 starter into place.
- Align the mounting holes and hand-tighten the mounting bolts.
- Once aligned, tighten the mounting bolts to the manufacturer's specified torque (refer to your vehicle's service manual).
- Ponovno priklop ožičenja:
- Reconnect the ignition switch wire to the appropriate solenoid terminal.
- Reconnect the main battery cable to the main solenoid terminal. Ensure all connections are clean and secure.
- Ponovno priključite baterijo: Ponovno priključite pozitivni (+) kabel akumulatorja, nato pa še negativni (-) kabel akumulatorja.
- Testno delovanje: Attempt to start the vehicle. Listen for proper starter engagement and engine cranking.
Slika 3: Zadaj view of the starter, showing the electrical connection points for the battery cable and ignition wire.
Slika 4: Spredaj view of the starter, displaying the drive gear (pinion) which engages with the engine's flywheel.
6. Delovanje
The starter motor is an integral part of your vehicle's starting system. When the ignition key is turned to the "START" position, electrical current flows to the starter solenoid. The solenoid then engages the starter drive gear with the engine's flywheel and simultaneously sends power to the starter motor. The motor rotates the flywheel, cranking the engine until it starts. Once the engine starts, the ignition key should be released, and the starter disengages from the flywheel.
Avoid prolonged cranking (more than 10-15 seconds) to prevent overheating the starter. Allow a brief cool-down period between starting attempts.
7. Vzdrževanje
The DB Electrical 410-44135 Starter is designed for minimal maintenance. However, periodic checks can help ensure its longevity and reliable operation:
- Preverite povezave: Periodically check all electrical connections to the starter for corrosion or looseness. Clean any corrosion and tighten connections as needed.
- Stanje baterije: Ensure your vehicle's battery is in good condition and fully charged. A weak battery can put excessive strain on the starter.
- Celovitost kabla: Inspect battery cables and starter cables for fraying, cracks, or damage. Replace damaged cables promptly.
8. Odpravljanje težav
Če imate težave z zaganjalnikom, upoštevajte naslednje pogoste težave in rešitve:
| Simptom | Možen vzrok | rešitev |
|---|---|---|
| Starter clicks but engine does not crank. | Weak battery, loose battery cables, faulty solenoid, or seized engine. | Check battery charge and terminals. Inspect battery cables. If battery is good, test solenoid or starter motor. |
| Starter cranks slowly. | Low battery charge, corroded battery terminals, or high resistance in starter circuit. | Charge or replace battery. Clean battery terminals. Inspect starter cables for corrosion or damage. |
| Starter spins but engine does not crank. | Faulty starter drive (bendix) or damaged flywheel teeth. | Inspect starter drive gear and flywheel for damage. Replacement of starter may be necessary. |
| No response when turning ignition key. | Dead battery, faulty ignition switch, blown fuse, or open circuit in starter wiring. | Preverite voltage. Inspect fuses related to starting system. Test ignition switch. Verify all wiring connections. |
Če koraki za odpravljanje težav ne odpravijo težave, je priporočljivo, da se posvetujete s profesionalnim mehanikom.
9. Specifikacije
| Funkcija | Specifikacija |
|---|---|
| Vrsta enote | Zaganjalnik |
| voltage | 12 volta |
| Vrtenje | V smeri urinega kazalca (CW) |
| Zobje | 9 |
| Moč (KW) | 1.2 KW |
| Tip zaganjalnika | Direct Drive (DD) |
| Teža predmeta | 7.65 funtov |
| Mere izdelka (D x Š x V) | 9.5 x 5.5 x 5.5 palcev |
| Številka dela proizvajalca | 410-44135 |
| UPC | 701485503160 |
10. Garancija in podpora
DB Electrical provides a 1-letna garancija on this product from the date of purchase. This warranty covers defects in materials and workmanship under normal use. If the product fails within one year of your order, DB Electrical will replace it.
For warranty claims, technical assistance, or support, please contact DB Electrical customer service. Refer to your purchase documentation for contact details or visit the official DB Electrical webmesto.
Note: The warranty does not cover damage caused by improper installation, misuse, neglect, accident, or unauthorized modification.
