Uvod
The TC Electronic T2 Reverb effects pedal provides a diverse range of reverb effects for guitar and other instruments. This manual details the pedal's features, setup procedures, operational guidelines, maintenance tips, troubleshooting steps, and technical specifications to ensure optimal performance.
Konec izdelkaview
The T2 Reverb pedal features intuitive controls for shaping your sound and a robust design for reliable use. Familiarize yourself with the pedal's components:
- Gumb DECAY: Controls the length of the reverb tail.
- Gumb TONE: Adjusts the brightness or darkness of the reverb.
- Gumb MIX: Balances the ratio between the dry (unaffected) signal and the wet (effected) signal.
- Reverb Type Selector: A rotary switch to select from various reverb algorithms (I-VIII, E1, E2, TP).
- Nožno stikalo: Vključi ali zaobide učinek.
- Vhodni/izhodni priključki: For connecting your instrument and amplifier.
- Vhodna moč: For connecting a 9V DC power supply.
Nastavitev
- Napajalni priključek: Connect a 9V DC power adapter (center negative, not included) to the power input jack. Alternatively, the pedal can be powered by a 9V battery (not included) by opening the battery compartment.
- Priključek instrumenta: Connect your instrument (e.g., guitar) to the input jack on the right side of the pedal using a standard 1/4-inch instrument cable.
- AmpPovezava lifier: Povežite izhodni priključek na levi strani pedala s svojim ampvhod lifierja s standardnim 1/4-palčnim instrumentalnim kablom.
- Stereo Operation (Optional): For stereo output, connect the second output jack to a second ampzvočnik ali stereo vhodna naprava.
Preden vklopite napravo, se prepričajte, da so vse povezave varne amplifier and pedal.
Navodila za uporabo
Osnovno delovanje
- Vklop: Once connected, press the footswitch to engage the effect. The LED indicator will illuminate. Press again to bypass the effect.
- Izbira vrste odmeva: Rotate the Reverb Type Selector knob to choose from the available reverb algorithms (I through VIII, E1, E2). Each setting offers a distinct reverb character.
- Adjusting Reverb Parameters:
- Uporabite RAZpad knob to control the duration of the reverb.
- Uporabite TON knob to adjust the frequency content of the reverb, making it brighter or darker.
- Uporabite MEŠAJ knob to blend the dry signal with the reverb effect. A higher setting increases the effect's prominence.
TonePrint Feature
The "TP" setting on the Reverb Type Selector activates the TonePrint feature. TonePrint allows you to upload custom-tuned reverb sounds created by artists or design your own using the TC Electronic TonePrint app. Connect your pedal to a computer via USB (cable not included) or beam TonePrints wirelessly from your smartphone to the pedal's pickup.
Vzdrževanje
- Čiščenje: Za čiščenje zunanjosti pedala uporabite mehko, suho krpo. Izogibajte se abrazivnim čistilom ali topilom.
- Zamenjava baterije: If using battery power, replace the 9V battery when the LED indicator dims or the effect performance degrades. To replace, open the battery compartment on the underside of the pedal.
- Shranjevanje: Store the pedal in a dry environment, away from extreme temperatures and direct sunlight, when not in use. Disconnect power and remove the battery if storing for extended periods.
Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Ni zvoka ali je signal šibek | Incorrect cable connections, dead battery, faulty power supply, volume knobs on instrument/amp zavrnjen. | Check all cable connections. Replace battery or verify power supply. Ensure instrument and amplifier volumes are set appropriately. |
| Neželen hrup ali brenčanje | Ground loop, faulty cables, interference from other electronics, improper power supply. | Use shielded cables. Try a different power outlet or isolated power supply. Move pedal away from other electronic devices. |
| Effect not engaging (LED off) | Ni napajanja, okvarjen nožni stikalo. | Verify power connection and battery status. If problem persists, contact support. |
| TonePrint not loading | Incorrect app usage, connection issues. | Ensure the TonePrint app is updated and the pedal is correctly connected (USB or beaming). Refer to the TonePrint app's instructions for detailed guidance. |
Specifikacije
- Model: T2
- Teža artikla: 1 pound (approximately 454 grams)
- Dimenzije izdelka: 4.61 x 2.48 x 2.91 palcev (11.7 x 6.3 x 7.4 cm)
- vir energije: 9V DC (center negative) power adapter or 9V battery
- voltage: 9 volta
- Oblika signala: Analogni
- Vmesnik strojne opreme: HP-HSC
Garancija in podpora
TC Electronic products are covered by a limited warranty. For detailed warranty information, product support, or service inquiries, please visit the official TC Electronic webspletno mesto ali se obrnite neposredno na njihovo podporo strankam. Shranite dokazilo o nakupu za uveljavljanje garancije.
Uradno Webspletno mesto: www.tcelectronic.com
