1. Uvod
This user manual provides detailed instructions for the installation, operation, and maintenance of your Feit Electric LED Utility Shop Light, model 917972. This versatile LED shop light is designed to provide bright, efficient illumination for various indoor spaces such as garages, basements, game rooms, utility rooms, workshops, cabinets, closets, and attics.

Figure 1: Feit Electric LED Utility Shop Light (Model 917972) packaging, highlighting its features and design.
2. Varnostne informacije
Please read and understand all safety instructions before installing or operating this product. Failure to do so may result in electric shock, fire, or other injuries.
- Pred namestitvijo ali servisiranjem vedno izklopite napajanje.
- Do not install near heat sources or in wet locations. This product is designed for indoor use only.
- Prepričajte se, da površina za montažo lahko prenese težo naprave.
- Ne glejte neposredno v LED-svetlobo, ko je ta osvetljena.
- Use only with 120V AC power supply.
- Če je zunanji gibljivi kabel ali kabel te svetilke poškodovan, ga mora zamenjati izključno proizvajalec ali njegov serviser ali podobno usposobljena oseba, da se izognete nevarnosti.
3. Vsebina paketa
Pred začetkom namestitve preverite, ali so prisotne vse komponente:
- Feit Electric LED Utility Shop Light Fixture (Model 917972)
- Two (2) 6-inch (15 cm) Hanging Cables
- Two (2) Mounting Screws for flush mount installation
4. Nastavitev in namestitev
The Feit Electric LED Utility Shop Light offers two primary installation methods: hanging and flush mount.
4.1. Viseča namestitev
- Identify the desired location for the shop light. Ensure it is near a power outlet.
- Attach the two 6-inch (15 cm) hanging cables to the designated slots on the top of the shop light fixture.
- Securely attach the other end of the hanging cables to a sturdy overhead structure (e.g., ceiling joists, chains, or hooks) using appropriate hardware (not included, unless specified in package contents). Ensure the fixture is level and stable.
- Plug the power cord into a standard 120V AC grounded outlet.
4.2. Flush Mount Installation
- Determine the exact mounting points on the ceiling or wall where the fixture will be installed. Mark these points accurately, ensuring they align with the mounting holes on the fixture.
- Drill pilot holes at the marked locations, if necessary, suitable for the provided mounting screws.
- Align the fixture's mounting holes with the pilot holes.
- Insert and tighten the two mounting screws to secure the fixture firmly against the surface. Do not overtighten.
- Plug the power cord into a standard 120V AC grounded outlet.
5. Navodila za uporabo
The Feit Electric LED Utility Shop Light is designed for simple operation.
- Once properly installed and plugged into a live 120V AC outlet, the light will illuminate instantly.
- To turn the light ON/OFF, use the wall switch connected to the outlet, or unplug the fixture from the outlet. Note: This fixture does not include an integrated ON/OFF switch or pull chain.
- The LED technology provides instant full brightness with no humming.
6. Vzdrževanje
The Feit Electric LED Utility Shop Light requires minimal maintenance.
- Čiščenje: Ensure the fixture is unplugged and cool before cleaning. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- LED: The integrated LED lights are designed for long life and are not replaceable. Do not attempt to open the fixture or replace the LEDs.
- Pregled: Periodically inspect the power cord and connections for any signs of damage. If damage is found, discontinue use and contact customer support.
7. Odpravljanje težav
If you experience issues with your shop light, refer to the following common problems and solutions:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Luč se ne vklopi. | No power to the outlet; fixture not properly plugged in; faulty outlet or wall switch. | Check if the outlet has power (test with another device). Ensure the plug is fully inserted. Check the circuit breaker. Verify the wall switch is ON. |
| Svetloba utripa ali zatemni. | Loose connection; incompatible dimmer switch (this fixture is not dimmable); voltage nihanja. | Ensure the plug is secure. Do not use with a dimmer switch. If flickering persists, consult an electrician. |
| Brenčanje. | Not applicable for this LED fixture. | This LED fixture is designed for no humming. If humming occurs, discontinue use and contact customer support. |
If the problem persists after trying these solutions, please contact Feit Electric customer support.
8. Specifikacije
| Funkcija | Podrobnost |
|---|---|
| Znamka | Feit Electric |
| Številka modela | 917972 |
| Vrsta svetlobnega vira | LED |
| Barvna temperatura | 4100 Kelvinov (hladna bela) |
| Wattage | 38 vatov |
| Svetlobna moč | 3700 lumnov |
| Življenjske ure | 50,000 ur |
| voltage | 120 voltov (AC) |
| Material | Copper, Metal (Fixture) |
| Dimenzije izdelka | 47 x 6 x 3 palcev |
| Teža predmeta | 2.1 funta |
| Notranja/zunanja uporaba | Notranja |
| Vrsta namestitve | Flush Mount, Hanging |
9. Garancija in podpora
Feit Electric products are designed for durability and performance. This product is warrantied for five years from the date of purchase against defects in workmanship and materials. For warranty claims or technical support, please contact Feit Electric customer service.
Feit Electric Customer Service:
- Webspletno mesto: www.feit.com
- telefon: Refer to the official Feit Electric webspletno mesto za trenutne kontaktne številke.
Prosimo, shranite račun kot dokazilo o nakupu za namene garancije.





