Intermatic SW30MWK 30-Minute Spring Wound Timer User Manual

1. Uvod

The Intermatic SW30MWK 30-Minute Spring Wound Timer is a mechanical in-wall timer designed to provide energy-saving control for various electrical loads, including lights, fans, motors, and heaters. This timer operates without electricity, offering a reliable and cost-effective solution for automatically turning off devices after a preset time. This manual provides essential information for the safe installation, operation, and maintenance of your SW30MWK timer.

2. Izdelek je končanview

The SW30MWK timer features a simple, intuitive design for ease of use and installation. It is compatible with modern energy-efficient lighting options such as LED and CFL lights.

Ključne značilnosti:

• 30-Minute Off Control: Automatically limits the ON time of connected loads.
• Elektrika ni potrebna: Operates mechanically, providing energy savings and reducing utility costs.
• Enostavna zamenjava: Designed to fit any standard wall switch, single or multi-gang.
• Vsestranska uporaba: Ideal for controlling fans, lights, motors, heaters, and other appliances.
• LED and CFL Compatible: Works with modern energy-efficient lighting.

Slika 1: Spredaj view of the Intermatic SW30MWK 30-Minute Spring Wound Timer.

Figure 2: The SW30MWK timer seamlessly integrated into a living room wall.

Figure 3: Close-up highlighting the timer's energy-saving features and compatibility.

3. Varnostne informacije

WARNING: Risk of Electric Shock. May result in serious injury or death. Turn power OFF at the circuit breaker or fuse and test that power is OFF before wiring!

• Always disconnect power at the circuit breaker before installing or servicing the timer.
• This device must be installed by a qualified electrician in accordance with all national and local electrical codes.
• Do not use this timer with loads exceeding its specified ratings.
• Prepričajte se, da so vse žične povezave varne in pravilno izolirane.
• Keep children away from electrical wiring.

4. Nastavitev in namestitev

The Intermatic SW30MWK timer is designed for easy installation as a replacement for a standard wall switch. Follow these steps carefully:

1. Izklopite napajanje: Locate the circuit breaker or fuse that controls the power to the switch you are replacing. Turn it OFF. Verify that the power is off using a voltage tester.
2. Odstranite staro stikalo: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch, noting which wire was connected to which terminal.
3. Prepoznajte žice: Typically, you will find two wires connected to a standard single-pole switch: a hot wire (incoming power) and a load wire (going to the light/appliance). The SW30MWK timer has two black wires for connection.
4. Connect Timer Wires: Connect one black wire from the SW30MWK timer to the hot wire from the wall box. Connect the other black wire from the timer to the load wire from the wall box. Use appropriate wire connectors (wire nuts) to secure these connections.
5. Ozemljitev (če je primerno): If your wall box has a ground wire (bare copper or green), connect it to the green ground screw on the timer (if present) or to the ground wire in the box.
6. Časovnik montaže: Carefully push the wired timer into the wall box. Secure it with the provided mounting screws.
7. Namestite stensko ploščo: Attach the wall plate over the timer.
8. Obnovi moč: Ponovno vklopite napajanje na odklopniku.

Figure 4: Simplified wiring diagram for the SW30MWK timer.

5. Navodila za uporabo

The SW30MWK timer is simple to operate:

1. To Turn ON and Set Time: Rotate the knob clockwise past the 'OFF' position to the desired ON time (up to 30 minutes). The timer will begin counting down immediately.
2. Samodejno izklop: Once the set time has elapsed, the timer will automatically return to the 'OFF' position, turning off the connected device.
3. Ročni izklop: To turn off the device before the set time has elapsed, simply rotate the knob counter-clockwise back to the 'OFF' position.

6. Vzdrževanje

The Intermatic SW30MWK timer requires minimal maintenance. It is a mechanical device with no user-serviceable parts inside.

• Čiščenje: Periodically wipe the surface of the timer and wall plate with a soft, damp krpo. Ne uporabljajte abrazivnih čistil ali topil.
• Pregled: Occasionally check the timer and wall plate for any signs of damage, loose connections, or excessive wear. If any issues are found, disconnect power and consult a qualified electrician.

7. Odpravljanje težav

8. Specifikacije

9. Informacije o garanciji

Intermatic products are designed for durability and reliability. This product comes with a standard manufacturer's warranty. For specific details regarding the warranty period and terms, please refer to the warranty documentation included with your purchase or visit the official Intermatic webspletnega mesta. Shranite dokazilo o nakupu za uveljavljanje garancije.

10. Podpora

If you have any questions, require technical assistance, or need to report an issue with your Intermatic SW30MWK timer, please contact Intermatic customer support:

• Webspletno mesto: Visit the official Intermatic webspletno mesto za pogosta vprašanja, dokumentacijo o izdelku in kontaktne podatke.
• telefon: Refer to the contact details provided on the product packaging or the Intermatic webspletno mesto za telefonske številke za pomoč strankam.

Please have your model number (SW30MWK) and date of purchase ready when contacting support.